org.autoplot.ScriptContext2023

ScriptContext provides the API to perform abstract functions with the application. For example,

{@code
 ScriptContext.load('http://autoplot.org/data/somedata.dat')
 ScriptContext.writeToPdf('/tmp/foo.pdf')
}

PNG_KEY_SCRIPT

The name of the script which results in the image, optionally with its arguments.

PNG_KEY_VAP

The Autoplot .vap file which results in the image, optionally with "?" and modifiers.

PNG_KEY_URI

The Autoplot URI which results in the image.

_setOutputStream

_setOutputStream( java.io.OutputStream out ) → void

resets the output stream. This method is used internally, do not use this routine.

Parameters

out - an OutputStream

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

addBottomDecoration

addBottomDecoration( org.autoplot.dom.DomNode node, PyFunction painter ) → void

add code that will paint custom graphics on the canvas or on a plot. The command will be invoked after all other painting is done, making the decoration to be on top. Note plots can only have one decoration, and the Canvas can have any number. Calling reset() will remove all decorations.


def paint(g):
    g.color= Color.BLUE
    for i in xrange(0,1000,100):
        g.drawOval(500-i/2,500-i/2,i,i)

addBottomDecoration( dom.canvases[0], paint )

Parameters

node - the plot or canvas over which to plot
painter - the PyFunction to call when painting

Returns:

void (returns nothing)

addMouseModule

addMouseModule( org.autoplot.dom.Plot plot, String label, PyFunction listener ) → MouseModule

add code that will respond to mouse events. This will receive an event following the mouse release when a box is dragged out.


def boxLookup( evt ):
    showMessageDialog( "start: (%s,%s)
finish: (%s,%s)" %
        ( evt.getStartX(), evt.getStartY(), 
        evt.getFinishX(), evt.getFinishY() ) )
  
addMouseModule( dom.plots[0], 'Box Lookup', boxLookup )

Parameters

plot - the plot which will receive the events.
label - a label for the mouse module.
listener - the PyFunction to call with new events.

Returns:

the mouse module.

addPlotElement

addPlotElement( int chNum ) → int

"overplot" by adding another PlotElement to the plot and setting the data to this PlotElement.

Parameters

chNum - the focus

Returns:

the channel number for the new plot element.

addPlots

addPlots( int nrows, int ncolumns, String dir ) → List

adds a block of plots to the canvas below the focus plot. A plotElement is added for each plot as well.

Parameters

nrows - number of rows
ncolumns - number of columns
dir - below, above, right, or left, or null (None in Jython) to replace the current plot.

Returns:

the new plots.

[search for examples] [view on GitHub] [view on old javadoc] [view source]

addTab

addTab( String label, javax.swing.JComponent c ) → void

add a tab to the running application. A new tab will be added with the label, with the component added within a scroll pane.

Parameters

label - the label for the component.
c - the component to add.

Returns:

void (returns nothing)

addTopDecoration

addTopDecoration( org.autoplot.dom.DomNode node, PyFunction painter ) → void


def paint(g):
    for i in xrange(0,1000,100):
        g.drawOval(500-i/2,500-i/2,i,i)

addTopDecoration( dom.canvases[0], paint )

Parameters

node - the plot or canvas over which to plot
painter - the PyFunction to call when painting

Returns:

void (returns nothing)

alert

alert( String message ) → void

show a popup that you know the user will see. Note HTML code will work.

Parameters

message - a String

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

bind

bind( Object src, String srcProp, Object dst, String dstProp ) → void

binds two bean properties together. Bindings are bidirectional, but the initial copy is from src to dst. In MVC terms, src should be the model and dst should be a view. The properties must fire property change events for the binding mechanism to work. As of v2014a_10, if the src is a DomNode and a child of the application, then use dom.getController().bind so that the vap will contain the binding. Example:


 model= getApplicationModel()
 bind( model.getPlotDefaults(), "title", model.getPlotDefaults().getXAxis(), "label" )

Parameters

src - java bean such as model.getPlotDefaults()
srcProp - a property name such as "title"
dst - java bean such as model.getPlotDefaults().getXAxis()
dstProp - a property name such as "label"

Returns:

void (returns nothing)

bindGuiSafe

bindGuiSafe( Object src, String srcProp, Object dst, String dstProp, Converter c ) → void


 model= getApplicationModel()
 bind( model.getPlotDefaults(), "title", model.getPlotDefaults().getXAxis(), "label" )

Parameters

src - java bean such as model.getPlotDefaults()
srcProp - a property name such as "title"
dst - java bean such as model.getPlotDefaults().getXAxis()
dstProp - a property name such as "label"
c - converter for the binding, or null.

Returns:

void (returns nothing)

createApplicationModel

createApplicationModel( String id ) → ApplicationModel

return a new dom in a minimal Autoplot application. Use result.getCanvas() to get the DasCanvas which can be added to other components.


report= createApplicationModel()
addTab( 'report', report.canvas )
report.setDataSet(linspace(0,1,101))

Parameters

id - a String

Returns:

an org.autoplot.ApplicationModel

[search for examples] [view on GitHub] [view on old javadoc] [view source]

createDataPointRecorder

createDataPointRecorder( ) → DataPointRecorder

return a component which can be used to accumulate data. This is typically inserted into its own tab with the addTab command. This is set to sort data in X as it comes in, and this can be disabled with setSorted(False)


dpr= createDataPointRecorder()
addTab( 'digitizer', dpr )

Returns:

a new DataPointRecorder.

createGui

createGui( ) → void

create a model with a GUI presentation layer. If the GUI is already created, then this does nothing.

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

dumpToDas2Stream

dumpToDas2Stream( QDataSet ds, boolean ascii ) → void

serializes the dataset to a das2stream, a well-documented, open, streaming data format. (that's a joke.) Das2Streams are the legacy stream format used by the Plasma Wave Groups's server, and can serialize a limited set of QDataSets. QStreams were introduced to allow streaming of any QDataSet, see dumpToQStream. Currently, to keep the channel open, the stream is created in a buffer and then the buffer is sent. TODO: write a stream-producing code that doesn't close the output stream. (TODO: does it still do this?)

Parameters

ds - a QDataSet
ascii - use ascii transfer types, otherwise binary are used.

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

dumpToDas2Stream( QDataSet ds, String file, boolean ascii ) → void

dumpToQStream

dumpToQStream( QDataSet ds, java.io.OutputStream out, boolean ascii ) → void

serializes the dataset to a QStream, a self-documenting, streaming format useful for moving datasets.

ds= getDataSet('http://autoplot.org/data/somedata.cdf?BGSEc')
from java.lang import System
dumpToQStream( ds, System.out, True )

Parameters

ds - The dataset to stream. Note all schemes should be streamable, but some bugs exist that may prevent this.
out - stream, such as "System.out"
ascii - use ascii transfer types, otherwise binary are used.

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

fixLayout

fixLayout( ) → void

make the layout more efficient by removing empty spaces and overlapping plots.

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

formatDataSet

formatDataSet( QDataSet ds, String file ) → void

Export the data into a format implied by the filename extension. See the export data dialog for additional parameters available for formatting. For example:


 ds= getDataSet('http://autoplot.org/data/somedata.cdf?BGSEc')
 formatDataSet( ds, 'vap+dat:file:/home/jbf/temp/foo.dat?tformat=minutes&format=6.2f')

Parameters

ds - a QDataSet
file - local file name that is the target

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

formatDataSet( QDataSet ds, String file, ProgressMonitor monitor ) → void

generateTimeRanges

generateTimeRanges( String spec, String srange ) → String

Given a spec to format timeranges and a range to contain each timerange, produce a list of all timeranges covering the range formatted with the spec. For example, generateTimeRanges( "%Y-%m-%d", "Jun 2009" ) would result in 2009-06-01, 2009-06-02, ..., 2009-06-30.

Parameters

spec - such as "%Y-%m". Note specs like "%Y%m" will not be parsable.
srange - range limiting the list, such as "2009"

Returns:

a string array of formatted time ranges, such as [ "2009-01", "2009-02", ..., "2009-12" ]

[search for examples] [view on GitHub] [view on old javadoc] [view source]

getApplication

getApplication( ) → AutoplotUI

return the focus application.

Returns:

the focus application.

[search for examples] [view on GitHub] [view on old javadoc] [view source]

getApplicationModel

getApplicationModel( ) → ApplicationModel

returns the internal application model (the object that does all the business). This provides access to the internal model for power users. Note the applicationModel provides limited access, and the DOM now provides full access to the application.

Returns:

ApplicationModel object

[search for examples] [view on GitHub] [view on old javadoc] [view source]

getCompletions

getCompletions( String file ) → String

return a list of completions. This is useful in the IDL context as well as Jython scripts. This will perform the completion for where the carot is at the end of the string. Only completions where maybePlot indicates the URI is now valid are returned, so for example http://autoplot.org/data/somedata.cdf?noDep is not returned and http://autoplot.org/data/somedata.cdf?Magnitude is. Note this is included to continue support as this is described in http://autoplot.org/developer.idlMatlab.

Parameters

file - a String

Returns:

list of completions, containing the entire URI.

[search for examples] [view on GitHub] [view on old javadoc] [view source]

getDocumentModel

getDocumentModel( ) → Application

get the document model (DOM). This may initialize the model, in which case defaults like the cache directory are set.

Returns:

an org.autoplot.dom.Application

[search for examples] [view on GitHub] [view on old javadoc] [view source]

getInstance

getInstance( ) → ScriptContext2023

Returns:

org.autoplot.ScriptContext2023

[search for examples] [view on GitHub] [view on old javadoc] [view source]

getTimeRangesFor

getTimeRangesFor( String surl, String timeRange, String format ) → String

return an array of URLs that match the spec for the time range provided. For example,

  uri= 'http://cdaweb.gsfc.nasa.gov/istp_public/data/polar/hyd_h0/$Y/po_h0_hyd_$Y$m$d_v01.cdf?ELECTRON_DIFFERENTIAL_ENERGY_FLUX'
  xx= getTimeRangesFor( uri, '2000-jan', '$Y-$d-$m' )
  for x in xx:
    print x

Parameters

surl - an Autoplot uri with an aggregation specifier.
timeRange - a string that is parsed to a time range, such as "2001"
format - format for the result, such as "%Y-%m-%d"

Returns:

a list of URLs without the aggregation specifier.

[search for examples] [view on GitHub] [view on old javadoc] [view source]

getViewWindow

getViewWindow( ) → Window

return the Window for the application, to be used for dialogs. See createGui(), which creates the view.

Returns:

a java.awt.Window

[search for examples] [view on GitHub] [view on old javadoc] [view source]

getWindow

getWindow( ) → ApplicationModel

return the internal handle for the window and dom within.

Returns:

the internal handle for the application.

[search for examples] [view on GitHub] [view on old javadoc] [view source]

isModelInitialized

isModelInitialized( ) → boolean

provide way to see if the model is already initialized (e.g. for clone application)

Returns:

true is the model is already initialized.

[search for examples] [view on GitHub] [view on old javadoc] [view source]

load

load( String filename ) → void

load the .vap file. This is implemented by calling plot on the URI.

Parameters

filename - local or remote filename like http://autoplot.org/data/autoplot.vap

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

loadVap

loadVap( String filename ) → Application

load a vap from a file and return the dom.

Parameters

filename - .vap file

Returns:

Application

makeColorTable

makeColorTable( String name, QDataSet index, QDataSet rgb ) → Type

returns a color table with the given name. If the name is already registered, then the registered colortable is returned. using QDataSets as inputs to make it easier to use in scripts.

Parameters

name - the name for the colortable.
index - control points for the colors, or None
rgb - dataset of ds[N,3] where N is the number of colors

Returns:

object representing the color table.

mkdir

mkdir( String dir ) → void

make the directory. This must be a local file right now, but may start with "file://"

Parameters

dir - the directory

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

newApplication

newApplication( String id ) → AutoplotUI

get or create the application identified by the name. For example:

ds= ripples(20,20)
plot( 0, ds )
sliceWindow= newApplication('slice')
setApplication(sliceWindow)
plot( slice0(ds,0) )

Windows with this name will be reused.

Parameters

id - an identifier

Returns:

the AutoplotUI.

[search for examples] [view on GitHub] [view on old javadoc] [view source]

newDialogWindow

newDialogWindow( java.awt.Window parent, String title ) → ApplicationModel

return a new Autoplot.

Parameters

parent - a Window
title - a String

Returns:

an org.autoplot.ApplicationModel

[search for examples] [view on GitHub] [view on old javadoc] [view source]

newWindow

newWindow( String id, int width, int height, int x, int y ) → ApplicationModel

create a new window with the given location and size.

Parameters

id - identifier for the window
width - the canvas width
height - the canvas height
x - the window upper-left location, if possible
y - the window upper-left location, if possible

Returns:

a handle (do not use this object, code will break) for the window.

peekAt

peekAt( Object o ) → void

This is intended to be used with a debugger. The developer should put a breakpoint at the out.write statement, and then call peekAt from the script.

Parameters

o - any object we want to look at.

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

plot

plot( String suri ) → void

bring up the autoplot with the specified URL. Note the URI is resolved asynchronously, so errors thrown during the load cannot be caught here. See getDataSet to load data synchronously.

Parameters

suri - a URI or vap file

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

plot( String surl1, String surl2 ) → void
plot( int chNum, String surl ) → void
plot( int chNum, String label, String surl ) → void
plot( QDataSet ds ) → void
plot( QDataSet x, QDataSet y ) → void
plot( QDataSet x, QDataSet y, QDataSet z ) → void
plot( int chNum, QDataSet ds ) → void
plot( int chNum, QDataSet x, QDataSet y ) → void
plot( int chNum, QDataSet x, QDataSet y, QDataSet z ) → void
plot( int chNum, String label, QDataSet ds ) → void
plot( int chNum, String label, QDataSet x, QDataSet y ) → void
plot( int chNum, String label, QDataSet x, QDataSet y, String renderType ) → void
plot( int chNum, String label, QDataSet x, QDataSet y, String renderType, boolean reset ) → void
plot( int chNum, String label, QDataSet x, QDataSet y, QDataSet z ) → void
plot( int chNum, String label, QDataSet x, QDataSet y, QDataSet z, String renderType ) → void
plot( int chNum, String label, QDataSet x, QDataSet y, QDataSet z, String renderType, boolean reset ) → void

reset

reset( ) → void

reset the application to its initial state.

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

save

save( String filename ) → void

save the current state as a vap file

Parameters

filename - a String

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

saveVap

saveVap( org.autoplot.dom.Application dom, String filename ) → void

save the application dom to a file.

Parameters

dom - the application state
filename - the file.

Returns:

void (returns nothing)

setApplication

setApplication( org.autoplot.AutoplotUI app ) → void

set the current application for commands. For example, to have two windows plotting data, you would:

 plot([1,2,3])
 popup=newWindow('popup')
 setWindow(popup)
 plot([3,2,1])

Parameters

app - the application

Returns:

void (returns nothing)

setApplicationModel

setApplicationModel( org.autoplot.ApplicationModel m ) → void

set the focus for scripts.

Parameters

m - the application model.

Returns:

void (returns nothing)

setCanvasSize

setCanvasSize( int width, int height ) → void

set the size of the canvas. This is only used when the GUI is not used, and in headless mode, otherwise the GUI controls the size of the canvas.

Parameters

width - the width of the canvas
height - the height of the canvas

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

setDataSourceURL

setDataSourceURL( String surl ) → void

set the internal model's url to surl. The data set will be loaded, and writeToPng and writeToSvg can be used in headless mode.

Parameters

surl - a String

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

setDefaultApplication

setDefaultApplication( ) → void

reset the script focus to the default application.

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

setLayout

setLayout( int nrows ) → void

make a stack plot.

Parameters

nrows - number of rows (plots)

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

setLayout( int nrows, int ncolumns ) → void

setLayoutOverplot

setLayoutOverplot( int nplotElement ) → void

make a single plot with so many plot elements.

Parameters

nplotElement - the number of plotElements on the one plot.

Returns:

void (returns nothing)

setRenderStyle

setRenderStyle( String name ) → void

Set the style used to render the data using a string identifier: spectrogram, series, scatter, histogram, fill_to_zero, digital

Parameters

name - string name of the plot style.

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

setStatus

setStatus( String message ) → void

set the Autoplot status bar string. Use the prefixes "busy:", "warning:" and "error:" to set icons.

Parameters

message - a String

Returns:

void (returns nothing)

setTitle

setTitle( String title ) → void

set the title of the plot.

Parameters

title - a String

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

setWindow

setWindow( org.autoplot.ApplicationModel appm ) → void

Set the application model. This is the simplest Autoplot implementation existing, where there are no buttons, etc.

Parameters

appm - an ApplicationModel

Returns:

void (returns nothing)

setWindowLocation

setWindowLocation( int x, int y ) → void

set the window location

Parameters

x - the window upper-left location, if possible
y - the window upper-left location, if possible

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

showMessageDialog

showMessageDialog( String message ) → void

show a popup to the scientist, which they must acknowledge before this returns.

Parameters

message - a String

Returns:

void (returns nothing)

sleep

sleep( int millis ) → void

sleep for so many milliseconds. This is introduced to avoid the import, which makes running scripts securely non-trivial.

Parameters

millis - number of milliseconds to pause execution

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

unbind

unbind( org.autoplot.dom.DomNode src ) → void

unbind the property

Parameters

src - a DomNode

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

unbind( org.autoplot.dom.DomNode src, String srcProp, org.autoplot.dom.DomNode dst, String dstProp ) → void

waitUntilIdle

waitUntilIdle( ) → void

wait until the application is idle. This does a model.waitUntilIdle, but also checks for the DataSetSelector for pending operations.

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

waitUntilIdle( String id ) → void

writeToBufferedImage

writeToBufferedImage( org.autoplot.dom.Application applicationIn ) → BufferedImage

creates a BufferedImage from the provided DOM. This blocks until the image is ready.

Parameters

applicationIn - an Application

Returns:

the image

[search for examples] [view on GitHub] [view on old javadoc] [view source]

writeToBufferedImage( ) → BufferedImage

writeToPdf

writeToPdf( String filename ) → void

write out the current canvas to a pdf file. TODO: this has issues with the size. See writeToPng(filename). It looks like this might be handled here Note for relative references, this will use the Java process present working directory (PWD) instead of the PWD variable found in scripts

Parameters

filename - the local file to write the file.

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

writeToPdf( java.io.OutputStream out ) → void

writeToPng

writeToPng( String filename ) → void

write out the current canvas to a png file. TODO: bug 557: this has issues with the size. It's coded to get the size from the DOM, but if it is fitted and has a container it must get size from the container. Use writeToPng( filename, width, height ) instead for now. See writeToPdf(String filename), which appears to have a fix for this that would affect how this is resolved. Note for relative references, this will use the Java process present working directory (PWD) instead of the PWD variable found in scripts

Parameters

filename - The name of a local file

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

writeToPng( String filename, int width, int height ) → void
writeToPng( String filename, int width, int height, java.util.Map metadata ) → void
writeToPng( java.awt.image.BufferedImage image, String filename, java.util.Map metadata ) → void
writeToPng( java.io.OutputStream out ) → void

writeToSvg

writeToSvg( String filename ) → void

write out the current canvas to a svg file. Note for relative references, this will use the Java process present working directory (PWD) instead of the PWD variable found in scripts

Parameters

filename - the local file to write the file.

Returns:

void (returns nothing)

[search for examples] [view on GitHub] [view on old javadoc] [view source]

writeToSvg( java.io.OutputStream out ) → void

org.autoplot.ScriptContext2023

PNG_KEY_SCRIPT

PNG_KEY_VAP

PNG_KEY_URI

_setOutputStream

Parameters

Returns:

addBottomDecoration

Parameters

Returns:

See Also:

addMouseModule

Parameters

Returns:

See Also:

addPlotElement

Parameters

Returns:

See Also:

addPlots

Parameters

Returns:

addTab

Parameters

Returns:

See Also:

addTopDecoration

Parameters

Returns:

See Also:

alert

Parameters

Returns:

bind

Parameters

Returns:

See Also:

bindGuiSafe

Parameters

Returns:

See Also:

createApplicationModel

Parameters

Returns:

createDataPointRecorder

Returns:

See Also:

createGui

Returns:

dumpToDas2Stream

Parameters

Returns:

dumpToQStream

Parameters

Returns:

fixLayout

Returns:

formatDataSet

Parameters

Returns:

generateTimeRanges

Parameters

Returns:

getApplication

Returns:

getApplicationModel

Returns:

getCompletions

Parameters

Returns:

getDocumentModel

Returns:

getInstance

Returns:

getTimeRangesFor

Parameters

Returns:

getViewWindow

Returns:

getWindow