{
  "Spase": {
    "xmlns": "http://www.spase-group.org/data/schema",
    "xmlns:xsi": "http://www.w3.org/2001/XMLSchema-instance",
    "xsi:schemaLocation": "http://www.spase-group.org/data/schema http://www.spase-group.org/data/schema/spase-2_6_1.xsd",
    "_Note": "Nodes prefixed with a _ are not valid SPASE, but are included for debugging. Values prefixed with a x_ are not valid SPASE but may considered for addition for completeness.",
    "Version": "2.6.1",
    "_MasterURL": "https://cdaweb.gsfc.nasa.gov/pub/software/cdawlib/0JSONS/apollo12_sws_1hr_00000000_v01.json (from all.xml)",
    "NumericalData": {
      "ResourceID": "spase://NASA/NumericalData/Apollo12-LM/SWS/PT1HR",
      "_ResourceID": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ResourceID.json",
      "ResourceHeader": {
        "ResourceName": "Apollo 12 Solar Wind measurements at the lunar surface",
        "_ResourceName": "Source: Master/CDFglobalAttributes/Logical_source_description",
        "AlternateName": "apollo12_sws_1hr",
        "_AlternateName": "Source: Master/CDFglobalAttributes/Logical_source",
        "Description": "This is the hourly-averaged data from the Apollo 12 Solar Wind  Spectrometer instrument, reformatted by NSSDC for easier access and use.  During the lunarnight there is no solar wind signal so there are data gaps of about 15 dayseach lunation. Users should refer to the data set documentation paper entitled 'ALSEP solar wind spectrometer plasma data as observed at the Apollo 12 and 15 landing sites,' by Goldstein, Clay,Snyder, and Neugebauer, which is contained in the online Data Set Catalog at https://nssdc.gsfc.nasa.gov/nmc/publicationDisplay.do?id=B55381-000A",
        "_Description": "Source: Master/CDFglobalAttributes/TEXT",
        "Acknowledgement": "Please acknowledge Dr. Conway W. Snyder (JPL), and the NSSDC Lunar Data Project for providing these data.",
        "_Acknowledgement": "Source: Master/CDFglobalAttributes/Acknowledgement",
        "_Rights": {
          "Name": "SPDX",
          "Description": "Creative Commons Zero v1.0 Universal",
          "URL": "https://spdx.org/licenses/CC0-1.0.html",
          "SchemeURI": "https://spdx.org/licenses/"
        },
        "InformationURL": [
          {
            "URL": "https://nssdc.gsfc.nasa.gov/nmc/publicationDisplay.do?id=B55381-000A",
            "Name": "Documentation",
            "Description": "Dataset ",
            "_Note": "URL also in all.xml. Using master."
          },
          {
            "URL": "https://lunasox.gsfc.nasa.gov",
            "Name": " the Lunar Surface Origins Exploration service (LUNASOX)",
            "Description": "Additional Data Services via",
            "_Note": "URL also in all.xml. Using master."
          }
        ]
      },
      "DOI": "https://doi.org/10.48322/vars-pj10",
      "_DOI": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/DOI.json",
      "AccessInformation": [
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Conway W. Snyder at Jet Propulsion Laboratory",
          "Format": [
            "CDF"
          ],
          "Style": "Listing",
          "AccessURL": {
            "Name": "HTTPS from SPDF",
            "URL": "https://cdaweb.gsfc.nasa.gov/pub/data/apollo/apollo12_cdaweb/sws_1hr",
            "Description": "In CDF via HTTP from CDAWeb",
            "AccessFilenameTemplate": "apollo12_sws_1hr_%Y%m%d_%Q.cdf",
            "ProductKey": "APOLLO12_SWS_1HR"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Conway W. Snyder at Jet Propulsion Laboratory",
          "Format": [
            "CDF"
          ],
          "Style": "Listing",
          "AccessURL": {
            "Name": "FTPS from SPDF",
            "URL": "ftps://cdaweb.gsfc.nasa.gov/pub/data/apollo/apollo12_cdaweb/sws_1hr",
            "Description": "In CDF via HTTP from CDAWeb",
            "AccessFilenameTemplate": "apollo12_sws_1hr_%Y%m%d_%Q.cdf",
            "ProductKey": "APOLLO12_SWS_1HR"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Conway W. Snyder at Jet Propulsion Laboratory",
          "Format": [
            "CDF",
            "CSV",
            "GIF",
            "NetCDF",
            "PNG",
            "PS",
            "PDF",
            "XML",
            "x_Script.IDL",
            "x_Script.Python",
            "Text.ASCII",
            "x_WAV"
          ],
          "AccessURL": {
            "Name": "CDAWeb Web Service",
            "URL": "https://cdaweb.gsfc.nasa.gov/WebServices/",
            "Style": "WebService",
            "Description": "Instructions for using web services to access this dataset an other other metadata and options for CDAWeb datasets. The ProductKey here corresponds to the query parameter 'dataset' in the tables at the AccessURL in a dataset-related request can be made.",
            "ProductKey": "APOLLO12_SWS_1HR"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Conway W. Snyder at Jet Propulsion Laboratory",
          "Format": [
            "CDF",
            "GIF",
            "PDF",
            "Text.ASCII",
            "x_WAV"
          ],
          "AccessURL": {
            "Name": "CDAWeb Web Service user interface",
            "URL": "https://cdaweb.gsfc.nasa.gov/cgi-bin/eval2.cgi?index=sp_phys&dataset=APOLLO12_SWS_1HR",
            "Style": "WebService",
            "ProductKey": "APOLLO12_SWS_1HR",
            "Description": "Web service user interface for this product."
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Conway W. Snyder at Jet Propulsion Laboratory",
          "Format": [
            "x_Script.IDL",
            "x_Script.Python"
          ],
          "AccessURL": {
            "Name": "CDAWeb Python Script",
            "URL": "https://cdaweb.gsfc.nasa.gov/WS/cdasr/1/dataviews/sp_phys/datasets/APOLLO12_SWS_1HR/clientLibraryExample/",
            "ProductKey": "APOLLO12_SWS_1HR",
            "Style": "WebService",
            "Description": "Web service that generates a Python script to access this product."
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/SSCWeb. Please also acknowledge the data producer: Conway W. Snyder at Jet Propulsion Laboratory",
          "Format": [
            "HTML"
          ],
          "AccessURL": {
            "Name": "4D Orbit Viewer",
            "URL": "https://sscweb.gsfc.nasa.gov/4dorbit/?sc=APOLLO12_SWS_1HR",
            "ProductKey": "APOLLO12_SWS_1HR",
            "Style": "x_Visualization",
            "Description": "Web Service to this product."
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Conway W. Snyder at Jet Propulsion Laboratory",
          "Format": [
            "CSV",
            "JSON",
            "Binary"
          ],
          "AccessURL": {
            "Name": "CDAWeb HAPI Server",
            "URL": "https://hapi-server.org/servers/#server=CDAWeb&dataset=APOLLO12_SWS_1HR",
            "Style": "HAPI",
            "ProductKey": "APOLLO12_SWS_1HR",
            "Description": "Web Service to this product using the HAPI interface."
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Conway W. Snyder at Jet Propulsion Laboratory",
          "Format": [
            "x_Script.IDL",
            "x_Script.Javascript",
            "x_Script.MATLAB",
            "x_Script.Python",
            "x_Script.Autoplot",
            "x_Script.curl",
            "x_Script.wget"
          ],
          "AccessURL": {
            "Name": "CDAWeb HAPI Script in Multiple Languages",
            "URL": "https://hapi-server.org/servers/#server=CDAWeb&dataset=APOLLO12_SWS_1HR&return=script",
            "Style": "HAPI",
            "ProductKey": "APOLLO12_SWS_1HR",
            "Description": "Web Service user interface that generates scripts in IDL, Javascript, MATLAB, Python, Autoplot, curl, wget to access this product. See https://hapi-server.org/servers/api for the API."
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Conway W. Snyder at Jet Propulsion Laboratory",
          "Format": [
            "PNG",
            "PDF",
            "SVG"
          ],
          "AccessURL": {
            "Name": "HAPI visualizations",
            "URL": "https://hapi-server.org/plot/?server=https://cdaweb.gsfc.nasa.gov/hapi&dataset=APOLLO12_SWS_1HR&format=gallery",
            "Style": "x_Visualization",
            "ProductKey": "APOLLO12_SWS_1HR",
            "Description": "Web Service that generates plots. See https://hapi-server.org/plot/ for the API."
          }
        }
      ],
      "_AccessInformation": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/AccessInformation.json",
      "TemporalDescription": {
        "TimeSpan": {
          "StartDate": "1969-11-19T19:30:00Z",
          "StopDate": "1976-03-25T08:30:00Z"
        },
        "_TemporalDescription": "Generated from all.xml/@timerange_start and all.xml/@timerange_stop",
        "Cadence": "PT1H",
        "_Cadence": "Counts based on variable 'Epoch' in https://cdaweb.gsfc.nasa.gov/sp_phys/data/apollo/apollo12_cdaweb/sws_1hr/apollo12_sws_1hr_19691119_v01.cdf. The most common cadence, 3600000 [ms] = PT1H, occurred for 99.5502% of the 664 timesteps."
      },
      "Keyword": [
        "Apollo Lunar Surface Experiment Package (from all.xml/observatory/description/@short)",
        "Solar Wind Spectrometer (from all.xml/instrument/description/@short)",
        "Space Physics (from Master/CDFglobalAttributes/Discipline)",
        "Lunar Surface Environment (from Master/CDFglobalAttributes/Discipline)",
        "ALSEP (from Master/CDFglobalAttributes/Source_name)",
        "Apollo Lunar Surface Experiment Package (from Master/CDFglobalAttributes/Source_name)",
        "SWS (from all.xml/instrument/@ID)"
      ],
      "ObservedRegion": [
        "Heliosphere.NearEarth",
        "Heliosphere.Inner"
      ],
      "_ObservedRegion": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ObservedRegion.json",
      "ProcessingLevel": null,
      "_ProcessingLevel": "Processing level is not available in the master file; it should be there instead of, say, https://github.com/rweigel/cdawmeta-spase/blob/main/ProcessingLevel.json",
      "InstrumentID": "spase://SMWG/Instrument/Apollo12-LM/SWS",
      "MeasurementType": "ThermalPlasma",
      "Parameter2": [
        {
          "Name": "Epoch",
          "ParameterKey": "Epoch",
          "Description": "CATDESC: 'Universal Time'. Notes not in Master CDF: 'The units are the units in CDF files. For other web services, this variable is may be represented as a time string.'",
          "Units": null,
          "Support": {
            "Qualifier": "Scalar",
            "SupportQuantity": "Temporal"
          }
        },
        {
          "Name": "No. of spectra in set 1",
          "ParameterKey": "NSpectra_1",
          "Description": "Master CDF CATDESC: 'No. of spectra in set 1'. Master CDF VAR_NOTES: 'Set 1: least restrictive quality selection.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -99
        },
        {
          "Name": "Avg. Proton Density 1",
          "ParameterKey": "Density_1",
          "Description": "Master CDF CATDESC: 'Hour-Average Proton Density 1'. Master CDF VAR_NOTES: 'Set 1: least restrictive quality selection.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Protons/cm**3",
          "FillValue": -99.9
        },
        {
          "Name": "Alpha to Proton Ratio 1",
          "ParameterKey": "AP_Ratio_1",
          "Description": "Master CDF CATDESC: 'Alpha to Proton Ratio 1'. Master CDF VAR_NOTES: 'Set 1: least restrictive quality selection.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -9.99
        },
        {
          "Name": "Average Bulk Speed 1",
          "ParameterKey": "VEL_1",
          "Description": "Master CDF CATDESC: 'Hour-Average Proton Bulk Speed 1'. Master CDF VAR_NOTES: 'Set 1: least restrictive quality selection.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -999
        },
        {
          "Name": "Avg Thermal Velocity 1",
          "ParameterKey": "Vth_1",
          "Description": "Master CDF CATDESC: 'Hour-Average Thermal Velocity 1'. Master CDF VAR_NOTES: 'Set 1: least restrictive quality selection.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "Angle East 1",
          "ParameterKey": "East_1",
          "Description": "Master CDF CATDESC: 'Proton Flow Angle toward East 1, SE coordinates'. Master CDF VAR_NOTES: 'Points into proton flow; no correction for orbital velocity.Set 1: least restrictive quality selection.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg SE",
          "FillValue": -99.9
        },
        {
          "Name": "Angle North 1",
          "ParameterKey": "North_1",
          "Description": "Master CDF CATDESC: 'Proton Flow Angle toward ecliptic North 1 '. Master CDF VAR_NOTES: 'Set 1: least restrictive quality selection.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg SE",
          "FillValue": -99.9
        },
        {
          "Name": "Dev. of Proton Density 1",
          "ParameterKey": "Density_DEV_1",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Proton Density 1'. Master CDF VAR_NOTES: 'Set 1: least restrictive quality selection.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Protons/cm**3",
          "FillValue": -9.9
        },
        {
          "Name": "RMS Dev. of Alpha-Proton Ratio 1",
          "ParameterKey": "AP_Ratio_DEV_1",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Alpha-Proton Ratio 1'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -9.99
        },
        {
          "Name": "Dev. of Avg Bulk Speed 1",
          "ParameterKey": "VEL_DEV_1",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Avg Proton Bulk Speed 1'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "RMS Dev. of Avg Thermal Velocity 1",
          "ParameterKey": "Vth_DEV_1",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Average Thermal Velocity 1'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "RMS Dev. of Angle East 1",
          "ParameterKey": "East_DEV_1",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Angle toward East 1'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg",
          "FillValue": -9.9
        },
        {
          "Name": "RMS Dev. of Angle North 1",
          "ParameterKey": "North_DEV_1",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Angle toward North 1'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg",
          "FillValue": -9.9
        },
        {
          "Name": "No. of spectra in set 2",
          "ParameterKey": "NSpectra_2",
          "Description": "Master CDF CATDESC: 'No. of spectra in set 2'. Master CDF VAR_NOTES: 'Set 2:  RMS error on curve fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -99
        },
        {
          "Name": "Avg. Proton Density 2",
          "ParameterKey": "Density_2",
          "Description": "Master CDF CATDESC: 'Hour-Average Proton Density 2'. Master CDF VAR_NOTES: 'Set 2:  RMS error on curve fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Protons/cm**3",
          "FillValue": -9.9
        },
        {
          "Name": "Alpha to Proton Ratio 2",
          "ParameterKey": "AP_Ratio_2",
          "Description": "Master CDF CATDESC: 'Alpha to Proton Ratio 2'. Master CDF VAR_NOTES: 'Set 2:  RMS error on curve fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -9.99
        },
        {
          "Name": "Average Bulk Speed 2",
          "ParameterKey": "VEL_2",
          "Description": "Master CDF CATDESC: 'Hour-Average Proton Bulk Speed 2'. Master CDF VAR_NOTES: 'Set 2:  RMS error on curve fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -999
        },
        {
          "Name": "Avg Thermal Velocity 2",
          "ParameterKey": "Vth_2",
          "Description": "Master CDF CATDESC: 'Hour-Average Thermal Velocity 2'. Master CDF VAR_NOTES: 'Set 2:  RMS error on curve fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "Angle East 2",
          "ParameterKey": "East_2",
          "Description": "Master CDF CATDESC: 'Proton Flow Angle toward East 2, SE coordinates'. Master CDF VAR_NOTES: 'Points into proton flow; no correction for orbital velocity.  Set 2: RMS error on curve fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg SE",
          "FillValue": -9.9
        },
        {
          "Name": "Angle North 2",
          "ParameterKey": "North_2",
          "Description": "Master CDF CATDESC: 'Proton Flow Angle toward ecliptic North 2 '. Master CDF VAR_NOTES: 'Set 2: RMS error on curve  fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg SE",
          "FillValue": -99.9
        },
        {
          "Name": "Dev. of Proton Density 2",
          "ParameterKey": "Density_DEV_2",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Proton Density 2'. Master CDF VAR_NOTES: 'Set 2: RMS error on curve fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Protons/cm**3",
          "FillValue": -9.9
        },
        {
          "Name": "RMS Dev. of Alpha-Proton Ratio 2",
          "ParameterKey": "AP_Ratio_DEV_2",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Alpha-Proton Ratio 2'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -9.99
        },
        {
          "Name": "Dev. of Avg Bulk Speed 2",
          "ParameterKey": "VEL_DEV_2",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Avg Proton Bulk Speed 2'. Master CDF VAR_NOTES: 'Set 2: RMS error on curve fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "RMS Dev. of Avg Thermal Velocity 2",
          "ParameterKey": "Vth_DEV_2",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Average Thermal Velocity 2'. Master CDF VAR_NOTES: 'Set 2: RMS error on curve fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "RMS Dev. of Angle East 2",
          "ParameterKey": "East_DEV_2",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Angle toward East 2'. Master CDF VAR_NOTES: 'Set 2: RMS error on curve fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg",
          "FillValue": -9.9
        },
        {
          "Name": "RMS Dev. of Angle North 2",
          "ParameterKey": "North_DEV_2",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Angle toward North 2'. Master CDF VAR_NOTES: 'Set 2: RMS error on curve fitting < 20 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg",
          "FillValue": -9.9
        },
        {
          "Name": "No. of spectra in set 3",
          "ParameterKey": "NSpectra_3",
          "Description": "Master CDF CATDESC: 'No. of spectra in set 3'. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -99
        },
        {
          "Name": "Avg. Proton Density 3",
          "ParameterKey": "Density_3",
          "Description": "Master CDF CATDESC: 'Hour-Average Proton Density 3'. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Protons/cm**3",
          "FillValue": -99.9
        },
        {
          "Name": "Alpha to Proton Ratio 3",
          "ParameterKey": "AP_Ratio_3",
          "Description": "Master CDF CATDESC: 'Alpha to Proton Ratio 3'. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -9.99
        },
        {
          "Name": "Average Bulk Speed 3",
          "ParameterKey": "VEL_3",
          "Description": "Master CDF CATDESC: 'Hour-Average Proton Bulk Speed 3'. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -999
        },
        {
          "Name": "Avg Thermal Velocity 3",
          "ParameterKey": "Vth_3",
          "Description": "Master CDF CATDESC: 'Hour-Average Thermal Velocity 3'. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "Angle East 3",
          "ParameterKey": "East_3",
          "Description": "Master CDF CATDESC: 'Proton Flow Angle toward East 3, SE coordinates'. Master CDF VAR_NOTES: 'Points into proton flow; no correction for orbital velocity.  Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg SE",
          "FillValue": -99.9
        },
        {
          "Name": "Angle North 3",
          "ParameterKey": "North_3",
          "Description": "Master CDF CATDESC: 'Proton Flow Angle toward ecliptic North 3 '. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg SE",
          "FillValue": -99.9
        },
        {
          "Name": "Dev. of Proton Density 3",
          "ParameterKey": "Density_DEV_3",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Proton Density 3'. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Protons/cm**3",
          "FillValue": -9.9
        },
        {
          "Name": "RMS Dev. of Alpha-Proton Ratio 1",
          "ParameterKey": "AP_Ratio_DEV_3",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Alpha-Proton Ratio 3'. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -9.99
        },
        {
          "Name": "Dev. of Avg Bulk Speed 3",
          "ParameterKey": "VEL_DEV_3",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Avg Proton Bulk Speed 3'. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "RMS Dev. of Avg Thermal Velocity 3",
          "ParameterKey": "Vth_DEV_3",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Average Thermal Velocity 3'. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "RMS Dev. of Angle East 3",
          "ParameterKey": "East_DEV_3",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Angle toward East 3'. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg",
          "FillValue": -9.9
        },
        {
          "Name": "RMS Dev. of Angle North 3",
          "ParameterKey": "North_DEV_3",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Angle toward North 3'. Master CDF VAR_NOTES: 'Set 3: fit RMS <20  & 1 angle measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg",
          "FillValue": -9.9
        },
        {
          "Name": "No. of spectra in set 4",
          "ParameterKey": "NSpectra_4",
          "Description": "Master CDF CATDESC: 'No. of spectra in set 4'. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -99
        },
        {
          "Name": "Avg. Proton Density 4",
          "ParameterKey": "Density_4",
          "Description": "Master CDF CATDESC: 'Hour-Average Proton Density 4'. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Protons/cm**3",
          "FillValue": -99.9
        },
        {
          "Name": "Alpha to Proton Ratio 4",
          "ParameterKey": "AP_Ratio_4",
          "Description": "Master CDF CATDESC: 'Alpha to Proton Ratio 4'. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -9.99
        },
        {
          "Name": "Average Bulk Speed 4",
          "ParameterKey": "VEL_4",
          "Description": "Master CDF CATDESC: 'Hour-Average Proton Bulk Speed 4'. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -999
        },
        {
          "Name": "Avg Thermal Velocity 4",
          "ParameterKey": "Vth_4",
          "Description": "Master CDF CATDESC: 'Hour-Average Thermal Velocity 4'. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "Angle East 4",
          "ParameterKey": "East_4",
          "Description": "Master CDF CATDESC: 'Proton Flow Angle toward East 4, SE coordinates'. Master CDF VAR_NOTES: 'Points into proton flow; no correction for orbital velocity.Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg SE",
          "FillValue": -99.9
        },
        {
          "Name": "Angle North 4",
          "ParameterKey": "North_4",
          "Description": "Master CDF CATDESC: 'Proton Flow Angle toward ecliptic North 4 '. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg SE",
          "FillValue": -99.9
        },
        {
          "Name": "Dev. of Proton Density 4",
          "ParameterKey": "Density_DEV_4",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Proton Density 4'. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Protons/cm**3",
          "FillValue": -9.9
        },
        {
          "Name": "RMS Dev. of Alpha-Proton Ratio 4",
          "ParameterKey": "AP_Ratio_DEV_4",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Alpha-Proton Ratio 4'. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "FillValue": -9.99
        },
        {
          "Name": "Dev. of Avg Bulk Speed 4",
          "ParameterKey": "VEL_DEV_4",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Avg Proton Bulk Speed 4'. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "RMS Dev. of Avg Thermal Velocity 4",
          "ParameterKey": "Vth_DEV_4",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Average Thermal Velocity 4'. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Km/s",
          "FillValue": -99
        },
        {
          "Name": "RMS Dev. of Angle East 4",
          "ParameterKey": "East_DEV_4",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Angle toward East 4'. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg",
          "FillValue": -9.9
        },
        {
          "Name": "RMS Dev. of Angle North 4",
          "ParameterKey": "North_DEV_4",
          "Description": "Master CDF CATDESC: 'RMS Deviation of Angle toward North 4'. Master CDF VAR_NOTES: 'Set 4: fit RMS <20  & 2 angles measured.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "Deg",
          "FillValue": -9.9
        }
      ]
    }
  }
}