{
  "Spase": {
    "xmlns": "http://www.spase-group.org/data/schema",
    "xmlns:xsi": "http://www.w3.org/2001/XMLSchema-instance",
    "xsi:schemaLocation": "http://www.spase-group.org/data/schema http://www.spase-group.org/data/schema/spase-2_6_1.xsd",
    "_Note": "Nodes prefixed with a _ are not valid SPASE, but are included for debugging. Values prefixed with a x_ are not valid SPASE but may considered for addition for completeness.",
    "Version": "2.6.1",
    "_MasterURL": "https://cdaweb.gsfc.nasa.gov/pub/software/cdawlib/0JSONS/de2_lapi_orbit-attitude_00000000_v01.json (from all.xml)",
    "NumericalData": {
      "ResourceID": null,
      "_ResourceID": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ResourceID.json",
      "ResourceHeader": {
        "ResourceName": "DE-2, OA_Corrected IDFS format",
        "_ResourceName": "Source: Master/CDFglobalAttributes/Logical_source_description",
        "AlternateName": "de2_lapi_orbit-attitude",
        "_AlternateName": "Source: Master/CDFglobalAttributes/Logical_source",
        "Description": "The DE-2 spacecraft (low-altitude mission) complemented the high-altitude mission DE-1and was placed into an orbit with a perigee sufficiently low to permit measurements of neutral composition, temperature, and wind. The apogee was high enough to permit measurements above the interaction regions of suprathermal ions, and also plasma flow measurements at the feet of the magnetospheric field lines. The general form of the spacecraft was a short polygon 137 cm in diameter and 115 cm high. The triaxial antennas were 23 m tip-to-tip. One 6-m boom was provided for remote measurements. The spacecraft weight was 403 kg. Power was supplied by a solar cell array, which charged two 6-ampere-hour nickel-cadmium batteries. The spacecraft was three-axis stabilized with the yaw axis aligned toward the center of the earth to within 1 deg. The spin axis was normal to the orbit plane within 1 deg with a spin rate of one revolution per orbit. A single-axis scan platform was included in order to mount the low-altitude plasma instrument (81-070B-08). The platform rotated about the spin axis. A pulse code modulation telemetry data system was used that operated in real time or in a tape-recorder mode. Data were acquired on a science-problem-oriented basis, with closely coordinated operations of the various instruments, both satellites, and supportive experiments. Measurements were temporarily stored on tape recorders before transmission at an 8:1 playback-to-record ratio. Since commands were also stored in a command memory unit, spacecraft operations were not real time. Additional details can be found in R. A. Hoffman et al., Space Sci. Instrum., v. 5, n. 4, p. 349, 1981. DE-2 reentered the atmosphere on February 19, 1983. The Low-Altitude Plasma Instrument (LAPI) provided high-resolution velocity space measurements of positive ions and electrons from 5 eV to 32 keV. The two Geiger-Mueller counter tubes (0 and 90 deg) measured trapped electrons and precipitating electrons above 35 keV as integral number flux. Pitch angle measurements covered the full 180 deg range. Data from this investigation and supporting measurements were used to study (1) the identification and intensities of Birkeland currents, (2) auroral particle source regions and acceleration mechanisms, (3) the existence and role of E parallel to B, (4) sources and effects of polar cap particle fluxes, (5) the transport of plasma within and through the magnetospheric cusp, (6) dynamic configurations of high-latitude flux tubes, (7) loss-cone effects of wave-particle interactions, (8) hot-cold plasma interactions, (9) ionospheric effects of particle precipitation, and (10) plasma convection at high altitudes. The instrument contained an array of 15 parabolic electrostatic analyzers of the ISIS 2 type, each with an electron channel and an ion channel, in order to obtain detailed pitch-angle distributions as a function of energy. Two Geiger-Mueller counters were mounted on the scan platform. The basic mode of operation provided a 32-point energy spectrum in the range 5 eV to 32 kev every second. The voltages on the electrostatic analyzers were programmable to allow for greater space/time resolution over limited portions of the energy and angular distributions. The instrument was mounted on a one-axis scan platform controlled by a magnetometer, whose purpose was to maintain the detector array, which spanned 180 deg, at a nearly constant angle to the magnetic field. Additional details are found in J. D. Winningham et al., Space Sci. Instrum., v. 5, n. 4, p. 465, 1981. From March 16, 1982 to April 4, 1982 the instrument was turned off for corrective action. The Instrument Data File Set. URL http://www.idfs.org ",
        "_Description": "Source: Master/CDFglobalAttributes/TEXT",
        "_Rights": {
          "Name": "SPDX",
          "Description": "Creative Commons Zero v1.0 Universal",
          "URL": "https://spdx.org/licenses/CC0-1.0.html",
          "SchemeURI": "https://spdx.org/licenses/"
        }
      },
      "ProviderResourceName": "Dynamics Explorer 2>LAPI>The Low Altitude Plasma Instrument",
      "Caveats": "PI determined",
      "_Caveats": "Source: Master/CDFglobalAttributes/Rules_of_use",
      "DOI": null,
      "_DOI": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/DOI.json",
      "AccessInformation": [
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: David Winningham at Southwest Research Institute",
          "Format": [
            "CDF"
          ],
          "Style": "Listing",
          "AccessURL": {
            "Name": "HTTPS from SPDF",
            "URL": "https://cdaweb.gsfc.nasa.gov/pub/data/de/de2/particles_lapi/swri_orbit-attitude-cdf",
            "Description": "In CDF via HTTP from CDAWeb",
            "AccessFilenameTemplate": "de2_lapi_orbit-attitude_%Y%m%d%H%M%S_%Q.cdf",
            "AccessDirectoryTemplate": "%Y",
            "ProductKey": "DE2_LAPI_ORBIT-ATTITUDE"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: David Winningham at Southwest Research Institute",
          "Format": [
            "CDF"
          ],
          "Style": "Listing",
          "AccessURL": {
            "Name": "FTPS from SPDF",
            "URL": "ftps://cdaweb.gsfc.nasa.gov/pub/data/de/de2/particles_lapi/swri_orbit-attitude-cdf",
            "Description": "In CDF via HTTP from CDAWeb",
            "AccessFilenameTemplate": "de2_lapi_orbit-attitude_%Y%m%d%H%M%S_%Q.cdf",
            "AccessDirectoryTemplate": "%Y",
            "ProductKey": "DE2_LAPI_ORBIT-ATTITUDE"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: David Winningham at Southwest Research Institute",
          "Format": [
            "CDF",
            "CSV",
            "GIF",
            "NetCDF",
            "PNG",
            "PS",
            "PDF",
            "XML",
            "x_Script.IDL",
            "x_Script.Python",
            "Text.ASCII",
            "x_WAV"
          ],
          "AccessURL": {
            "Name": "CDAWeb Web Service",
            "URL": "https://cdaweb.gsfc.nasa.gov/WebServices/",
            "Style": "WebService",
            "Description": "Instructions for using web services to access this dataset an other other metadata and options for CDAWeb datasets. The ProductKey here corresponds to the query parameter 'dataset' in the tables at the AccessURL in a dataset-related request can be made.",
            "ProductKey": "DE2_LAPI_ORBIT-ATTITUDE"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: David Winningham at Southwest Research Institute",
          "Format": [
            "CDF",
            "GIF",
            "PDF",
            "Text.ASCII",
            "x_WAV"
          ],
          "AccessURL": {
            "Name": "CDAWeb Web Service user interface",
            "URL": "https://cdaweb.gsfc.nasa.gov/cgi-bin/eval2.cgi?index=sp_phys&dataset=DE2_LAPI_ORBIT-ATTITUDE",
            "Style": "WebService",
            "ProductKey": "DE2_LAPI_ORBIT-ATTITUDE",
            "Description": "Web service user interface for this product."
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: David Winningham at Southwest Research Institute",
          "Format": [
            "x_Script.IDL",
            "x_Script.Python"
          ],
          "AccessURL": {
            "Name": "CDAWeb Python Script",
            "URL": "https://cdaweb.gsfc.nasa.gov/WS/cdasr/1/dataviews/sp_phys/datasets/DE2_LAPI_ORBIT-ATTITUDE/clientLibraryExample/",
            "ProductKey": "DE2_LAPI_ORBIT-ATTITUDE",
            "Style": "WebService",
            "Description": "Web service that generates a Python script to access this product."
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/SSCWeb. Please also acknowledge the data producer: David Winningham at Southwest Research Institute",
          "Format": [
            "HTML"
          ],
          "AccessURL": {
            "Name": "4D Orbit Viewer",
            "URL": "https://sscweb.gsfc.nasa.gov/4dorbit/?sc=DE2_LAPI_ORBIT-ATTITUDE",
            "ProductKey": "DE2_LAPI_ORBIT-ATTITUDE",
            "Style": "x_Visualization",
            "Description": "Web Service to this product."
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: David Winningham at Southwest Research Institute",
          "Format": [
            "CSV",
            "JSON",
            "Binary"
          ],
          "AccessURL": {
            "Name": "CDAWeb HAPI Server",
            "URL": "https://hapi-server.org/servers/#server=CDAWeb&dataset=DE2_LAPI_ORBIT-ATTITUDE@0",
            "Style": "HAPI",
            "ProductKey": [
              "DE2_LAPI_ORBIT-ATTITUDE@0",
              "DE2_LAPI_ORBIT-ATTITUDE@1"
            ],
            "Description": "Web Service to this product using the HAPI interface. Note that HAPI dataset has a collection of parameters, each having the same time stamps. This CDAWeb dataset contains 2 HAPI-type datasets. The @0, @1, ... at the end of the ParameterKeys indicates the index of the CDAWeb dataset. (The dataset index <=> CDF file time variable pairs are @0 => Epoch, @1 => Mode_Epoch.)"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: David Winningham at Southwest Research Institute",
          "Format": [
            "x_Script.IDL",
            "x_Script.Javascript",
            "x_Script.MATLAB",
            "x_Script.Python",
            "x_Script.Autoplot",
            "x_Script.curl",
            "x_Script.wget"
          ],
          "AccessURL": {
            "Name": "CDAWeb HAPI Script in Multiple Languages",
            "URL": "https://hapi-server.org/servers/#server=CDAWeb&dataset=DE2_LAPI_ORBIT-ATTITUDE@0&return=script",
            "Style": "HAPI",
            "ProductKey": [
              "DE2_LAPI_ORBIT-ATTITUDE@0",
              "DE2_LAPI_ORBIT-ATTITUDE@1"
            ],
            "Description": "Web Service user interface that generates scripts in IDL, Javascript, MATLAB, Python, Autoplot, curl, wget to access this product. See https://hapi-server.org/servers/api for the API. Note that HAPI dataset has a collection of parameters, each having the same time stamps. This CDAWeb dataset contains 2 HAPI-type datasets. The @0, @1, ... at the end of the ParameterKeys indicates the index of the CDAWeb dataset. (The dataset index <=> CDF file time variable pairs are @0 => Epoch, @1 => Mode_Epoch.)"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: David Winningham at Southwest Research Institute",
          "Format": [
            "PNG",
            "PDF",
            "SVG"
          ],
          "AccessURL": {
            "Name": "HAPI visualizations",
            "URL": "https://hapi-server.org/plot/?server=https://cdaweb.gsfc.nasa.gov/hapi&dataset=DE2_LAPI_ORBIT-ATTITUDE@0&format=gallery",
            "Style": "x_Visualization",
            "ProductKey": [
              "DE2_LAPI_ORBIT-ATTITUDE@0",
              "DE2_LAPI_ORBIT-ATTITUDE@1"
            ],
            "Description": "Web Service that generates plots. See https://hapi-server.org/plot/ for the API."
          }
        }
      ],
      "_AccessInformation": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/AccessInformation.json",
      "TemporalDescription": {
        "TimeSpan": {
          "StartDate": "1981-08-15T13:09:02Z",
          "StopDate": "1983-02-18T16:42:12Z"
        },
        "_TemporalDescription": "Generated from all.xml/@timerange_start and all.xml/@timerange_stop"
      },
      "Keyword": [
        "Dynamics Explorer 2 (from all.xml/observatory/description/@short)",
        "OA_Corrected (from all.xml/instrument/description/@short)",
        "Space Physics (from Master/CDFglobalAttributes/Discipline)",
        "Ionospheric Science (from Master/CDFglobalAttributes/Discipline)",
        "DE-2 (from Master/CDFglobalAttributes/Source_name)",
        "Dynamics Explorer 2 (from Master/CDFglobalAttributes/Source_name)",
        "M1 (from Master/CDFglobalAttributes/Data_type)",
        "Modified Data 1 (from Master/CDFglobalAttributes/Data_type)",
        "D2OALAPI (from all.xml/instrument/@ID)"
      ],
      "ObservedRegion": [
        "Earth.Magnetosphere",
        "Earth.NearSurface.Ionosphere",
        "Earth.NearSurface.AuroralRegion",
        "Earth.NearSurface.EquatorialRegion",
        "Earth.NearSurface.Thermosphere",
        "Earth.Magnetosphere.Polar",
        "Earth.NearSurface.PolarCap",
        "Earth.NearSurface.Atmosphere",
        "Earth.NearSurface"
      ],
      "_ObservedRegion": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ObservedRegion.json",
      "ProcessingLevel": null,
      "_ProcessingLevel": "Processing level is not available in the master file; it should be there instead of, say, https://github.com/rweigel/cdawmeta-spase/blob/main/ProcessingLevel.json",
      "InstrumentID": null,
      "MeasurementType": null,
      "Parameter2": [
        {
          "Name": "Time Line",
          "ParameterKey": "Epoch",
          "Description": "CATDESC: 'Start Time for the record'. Notes not in Master CDF: 'The units are the units in CDF files. For other web services, this variable is may be represented as a time string.'",
          "Units": "ns",
          "Support": {
            "Qualifier": "Scalar",
            "SupportQuantity": "Temporal"
          }
        },
        {
          "Name": "Time Resolution",
          "ParameterKey": "Epoch_End",
          "Description": "Master CDF CATDESC: 'End time = Epoch + value'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "ns"
        },
        {
          "Name": "LAPI+ Invariant Latitude, deg",
          "ParameterKey": "LAPI__Invariant",
          "Description": "Master CDF CATDESC: 'Invariant Latitude, deg'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "deg",
          "FillValue": -1e+31
        },
        {
          "Name": "Process Quality sensor 0",
          "ParameterKey": "Process_Quality_LAPI__Invariant",
          "Description": "Master CDF CATDESC: 'Data Quality Indicator for LAPI+ Invariant, sensor 0'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Fraction of a Year sensor 0",
          "ParameterKey": "Fraction_of_a_Year_LAPI__Invariant_CAL",
          "Description": "Master CDF CATDESC: 'Fraction of a Year for LAPI+ Invariant, sensor 0'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "yr",
          "FillValue": -1e+31
        },
        {
          "Name": "LAPI+ Magnetic Local Time",
          "ParameterKey": "LAPI__Magnetic",
          "Description": "Master CDF CATDESC: 'Magnetic Local Time, hr'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "hr",
          "FillValue": -1e+31
        },
        {
          "Name": "Data Quality Indicator for LAPI+ Magnetic",
          "ParameterKey": "Process_Quality_LAPI__Magnetic",
          "Description": "Master CDF CATDESC: 'Data Quality Indicator for LAPI+ Magnetic'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Fraction of a Year sensor 1",
          "ParameterKey": "Fraction_of_a_Year_LAPI__Magnetic_CAL",
          "Description": "Master CDF CATDESC: 'Fraction of a Year for LAPI+ Magnetic, sensor 1'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "yr",
          "FillValue": -1e+31
        },
        {
          "Name": "LAPI+ Altitude, km",
          "ParameterKey": "LAPI__Altitude",
          "Description": "Master CDF CATDESC: 'LAPI+ Altitude, km'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "km",
          "FillValue": -1e+31
        },
        {
          "Name": "Data Quality Indicator for LAPI+ Altitude",
          "ParameterKey": "Process_Quality_LAPI__Altitude",
          "Description": "Master CDF CATDESC: 'Data Quality Indicator for LAPI+ Altitude'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Fraction of a Year, sensor 2",
          "ParameterKey": "Fraction_of_a_Year_LAPI__Altitude_CAL",
          "Description": "Master CDF CATDESC: 'Fraction of a Year for LAPI+ Altitude, sensor 2'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "yr",
          "FillValue": -1e+31
        },
        {
          "Name": "LAPI+ Polar Latitude, deg",
          "ParameterKey": "LAPI__Polar",
          "Description": "Master CDF CATDESC: 'LAPI+ Polar Latitude, deg'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "deg",
          "FillValue": -1e+31
        },
        {
          "Name": "Data Quality Indicator for LAPI+ Polar",
          "ParameterKey": "Process_Quality_LAPI__Polar",
          "Description": "Master CDF CATDESC: 'Data Quality Indicator for LAPI+ Polar'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Fraction of a Year, sensor 3",
          "ParameterKey": "Fraction_of_a_Year_LAPI__Polar_CAL",
          "Description": "Master CDF CATDESC: 'Fraction of a Year for LAPI+ Polar, sensor 3'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "yr",
          "FillValue": -1e+31
        },
        {
          "Name": "LAPI+ Azimuth",
          "ParameterKey": "LAPI__Azimuth",
          "Description": "Master CDF CATDESC: 'LAPI+ Azimuth, Longitude'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "deg",
          "FillValue": -1e+31
        },
        {
          "Name": "Data Quality Indicator for LAPI+ Azimuth",
          "ParameterKey": "Process_Quality_LAPI__Azimuth",
          "Description": "Master CDF CATDESC: 'Data Quality Indicator for LAPI+ Azimuth'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Fraction of a Year, sensor 4",
          "ParameterKey": "Fraction_of_a_Year_LAPI__Azimuth_CAL",
          "Description": "Master CDF CATDESC: 'Fraction of a Year for LAPI+ Azimuth, sensor 4'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "yr",
          "FillValue": -1e+31
        },
        {
          "Name": "LAPI+ Local Solar Time",
          "ParameterKey": "LAPI__Local",
          "Description": "Master CDF CATDESC: 'LAPI+ Local Solar Time'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "hr",
          "FillValue": -1e+31
        },
        {
          "Name": "Data Quality Indicator for LAPI+ Local",
          "ParameterKey": "Process_Quality_LAPI__Local",
          "Description": "Master CDF CATDESC: 'Data Quality Indicator for LAPI+ Local'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Fraction of a Year, sensor 5",
          "ParameterKey": "Fraction_of_a_Year_LAPI__Local_CAL",
          "Description": "Master CDF CATDESC: 'Fraction of a Year for LAPI+ Local, sensor 5'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "yr",
          "FillValue": -1e+31
        },
        {
          "Name": "LAPI+ L-Shell",
          "ParameterKey": "LAPI__L_Shell",
          "Description": "Master CDF CATDESC: 'L-Shell'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Data Quality Indicator for LAPI+ L-Shell",
          "ParameterKey": "Process_Quality_LAPI__L_Shell",
          "Description": "Master CDF CATDESC: 'Data Quality Indicator for LAPI+ L-Shell'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Fraction of a Year, sensor 6",
          "ParameterKey": "Fraction_of_a_Year_LAPI__L_Shell_CAL",
          "Description": "Master CDF CATDESC: 'Fraction of a Year for LAPI+ L-Shell, sensor 6'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "yr",
          "FillValue": -1e+31
        },
        {
          "Name": "LAPI+ Orbit",
          "ParameterKey": "LAPI__Orbit",
          "Description": "Master CDF CATDESC: 'Orbit Number'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Data Quality Indicator for LAPI+ Orbit",
          "ParameterKey": "Process_Quality_LAPI__Orbit",
          "Description": "Master CDF CATDESC: 'Data Quality Indicator for LAPI+ Orbit'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Fraction of a Year, sensor 7",
          "ParameterKey": "Fraction_of_a_Year_LAPI__Orbit_CAL",
          "Description": "Master CDF CATDESC: 'Fraction of a Year for LAPI+ Orbit, sensor 7'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "yr",
          "FillValue": -1e+31
        },
        {
          "Name": "LAPI+ Satellite Speed (GEI)",
          "ParameterKey": "LAPI__Satellite_GEI",
          "Description": "Master CDF CATDESC: 'Satellite Speed (GEI)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "km/sec",
          "FillValue": -1e+31
        },
        {
          "Name": "Process Quality sensor 8",
          "ParameterKey": "Process_Quality_LAPI__Satellite_GEI",
          "Description": "Master CDF CATDESC: 'Data Quality Indicator for LAPI+ Satellite (GEI), sensor 8'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Fraction of a Year sensor 8",
          "ParameterKey": "Fraction_of_a_Year_LAPI__Satellite_GEI_CAL",
          "Description": "Master CDF CATDESC: 'Fraction of a Year for LAPI+ Satellite (GEI), sensor 8'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "yr",
          "FillValue": -1e+31
        },
        {
          "Name": "Solar Zenith Angle, rad",
          "ParameterKey": "LAPI__Solar_1_SZA_rad",
          "Description": "Master CDF CATDESC: 'Solar Zenith Angle, rad'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "rad",
          "FillValue": -1e+31
        },
        {
          "Name": "LAPI+ Solar Zenith Angle, deg",
          "ParameterKey": "LAPI__Solar_2_SZA_deg",
          "Description": "Master CDF CATDESC: 'Solar Zenith Angle, deg'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "deg",
          "FillValue": -1e+31
        },
        {
          "Name": "Data Quality Indicator for LAPI+ Solar",
          "ParameterKey": "Process_Quality_LAPI__Solar",
          "Description": "Master CDF CATDESC: 'Data Quality Indicator for LAPI+ Solar'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Fraction of a Year sensor 9",
          "ParameterKey": "Fraction_of_a_Year_LAPI__Solar_CAL",
          "Description": "Master CDF CATDESC: 'Fraction of a Year for LAPI+ Solar, sensor 9'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "yr",
          "FillValue": -1e+31
        },
        {
          "Name": "LAPI+ Light/Dark Indicator",
          "ParameterKey": "LAPI__Light_Dark",
          "Description": "Master CDF CATDESC: 'LAPI+ Light/Dark Indicator'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Process Quality sensor 10",
          "ParameterKey": "Process_Quality_LAPI__Light_Dark",
          "Description": "Master CDF CATDESC: 'Data Quality Indicator for LAPI+ Light/Dark, sensor 10'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "Fraction of a Year sensor 10",
          "ParameterKey": "Fraction_of_a_Year_LAPI__Light_Dark_CAL",
          "Description": "Master CDF CATDESC: 'Fraction of a Year for LAPI+ Light/Dark, sensor 10'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'",
          "Units": "yr",
          "FillValue": -1e+31
        },
        {
          "Name": "Mode Time Line",
          "ParameterKey": "Mode_Epoch",
          "Description": "CATDESC: 'Start Time of Mode Values for the record'. Notes not in Master CDF: 'The units are the units in CDF files. For other web services, this variable is may be represented as a time string.'",
          "Units": "ns",
          "Support": {
            "Qualifier": "Scalar",
            "SupportQuantity": "Temporal"
          }
        },
        {
          "Name": "Time Resolution",
          "ParameterKey": "Mode_Epoch_End",
          "Description": "Master CDF CATDESC: 'End time = Mode_Epoch + value, ns'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Mode_Epoch.'",
          "Units": "ns",
          "FillValue": -1e+31
        },
        {
          "Name": "StatusFlag - All",
          "ParameterKey": "MODE0_SPDF_StatusFlag___All",
          "Description": "Master CDF CATDESC: 'Status Indicator StatusFlag - All'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Mode_Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "StatusFlag - Bit 7",
          "ParameterKey": "MODE1_SPDF_StatusFlag___Bit_7",
          "Description": "Master CDF CATDESC: 'Status Indicator StatusFlag - Bit 7'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Mode_Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "StatusFlag - Bit 6",
          "ParameterKey": "MODE2_SPDF_StatusFlag___Bit_6",
          "Description": "Master CDF CATDESC: 'Status Indicator StatusFlag - Bit 6'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Mode_Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "StatusFlag - Bit 5",
          "ParameterKey": "MODE3_SPDF_StatusFlag___Bit_5",
          "Description": "Master CDF CATDESC: 'Status Indicator StatusFlag - Bit 5'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Mode_Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "StatusFlag - Bit 4",
          "ParameterKey": "MODE4_SPDF_StatusFlag___Bit_4",
          "Description": "Master CDF CATDESC: 'Status Indicator StatusFlag - Bit 4'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Mode_Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "StatusFlag - Bit 3",
          "ParameterKey": "MODE5_SPDF_StatusFlag___Bit_3",
          "Description": "Master CDF CATDESC: 'Status Indicator StatusFlag - Bit 3'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Mode_Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "StatusFlag - Bit 2",
          "ParameterKey": "MODE6_SPDF_StatusFlag___Bit_2",
          "Description": "Master CDF CATDESC: 'Status Indicator StatusFlag - Bit 2'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Mode_Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "StatusFlag - Bit 1",
          "ParameterKey": "MODE7_SPDF_StatusFlag___Bit_1",
          "Description": "Master CDF CATDESC: 'Status Indicator StatusFlag - Bit 1'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Mode_Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        },
        {
          "Name": "StatusFlag - Bit 0",
          "ParameterKey": "MODE8_SPDF_StatusFlag___Bit_0",
          "Description": "Master CDF CATDESC: 'Status Indicator StatusFlag - Bit 0'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Mode_Epoch.'",
          "Units": "unitless",
          "FillValue": -1e+31
        }
      ]
    }
  }
}