<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema http://www.spase-group.org/data/schema/spase-2_6_1.xsd">
  <_Note>Nodes prefixed with a _ are not valid SPASE, but are included for debugging. Values prefixed with a x_ are not valid SPASE but may considered for addition for completeness.</_Note>
  <Version>2.6.1</Version>
  <_MasterURL>https://cdaweb.gsfc.nasa.gov/pub/software/cdawlib/0JSONS/endurance_l2-gf_pes_00000000_v01.json (from all.xml)</_MasterURL>
  <NumericalData>
    <ResourceID/>
    <_ResourceID>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ResourceID.json</_ResourceID>
    <ResourceHeader>
      <ResourceName>Variation of Geometric Factor of PES during operation</ResourceName>
      <_ResourceName>Source: Master/CDFglobalAttributes/Logical_source_description</_ResourceName>
      <AlternateName>endurance_l2-gf_pes</AlternateName>
      <_AlternateName>Source: Master/CDFglobalAttributes/Logical_source</_AlternateName>
      <Description>The Endurance PES instrument was comprised of 8 boom-mounted Dual Electrostatic Analyzer (DESA) sensors, and a main electronics box (MEB). Each DESA sensor had two look directions; A-side (looking down to Earth from launch to pitch-over maneuver, and then up to space until loss of signal (LOS)); and B-side (looking up to space from launch to pitch-over, and then down to Earth until loss of signal (LOS)). The sensors were synchronized by the MEB and cross-calibrated to look at approximately the same energy at the same time. A PES sweep consisted of 81 different steps and took 10 seconds. At each step, a voltage could be applied to the Electrostatic Analyzer (ESA) and/or the Retarding Potential Analyzer (RPA). Of these 81 steps; 3 (0, 1, 44) were used to take background counts with the ESA grounded, and to fire the SLP; 34 (2:9, 33, 56:80) were used to collect the standard resolution data measurement (15% DE/E, 10eV to 1keV) using the ESA alone; and 44 (10:32, 34:43, 45:55) were used to collect the high-resolution measurement (0.5% DE/E, 20.3 eV to 25.85 eV) using the ESA and RPA combined. These calibration data present the variation in Geometric Factor with PES operation during flight</Description>
      <_Description>Source: Master/CDFglobalAttributes/TEXT</_Description>
      <_Rights>
        <Name>SPDX</Name>
        <Description>Creative Commons Zero v1.0 Universal</Description>
        <URL>https://spdx.org/licenses/CC0-1.0.html</URL>
        <SchemeURI>https://spdx.org/licenses/</SchemeURI>
      </_Rights>
      <InformationURL>
        <URL>https://doi.org/10.1007/s11214-022-00908-0</URL>
        <Name>https://doi.org/10.1007/s11214-022-00908-0 </Name>
        <Description>Collinson, G., Glocer, A., Pfaff, R. et al. The Endurance Rocket Mission. Space Sci Rev 218, 39 (2022). https://doi.org/10.1007/s11214-022-00908-0</Description>
        <_Note>URL also in all.xml. Using master.</_Note>
      </InformationURL>
    </ResourceHeader>
    <DOI/>
    <_DOI>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/DOI.json</_DOI>
    <_AccessInformation>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/AccessInformation.json</_AccessInformation>
    <TemporalDescription>
      <TimeSpan>
        <StartDate>2022-05-11T01:32:54Z</StartDate>
        <StopDate>2022-05-11T01:45:54Z</StopDate>
      </TimeSpan>
      <_TemporalDescription>Generated from all.xml/@timerange_start and all.xml/@timerange_stop</_TemporalDescription>
      <Cadence>PT0.136S</Cadence>
      <_Cadence>Counts based on variable 'Epoch' in https://cdaweb.gsfc.nasa.gov/sp_phys/data/sounding_rockets/endurance/endurance-2022/cdf/endurance_l2-gf_pes_20220511_v01.cdf. The most common cadence, 136 [ms] = PT0.136S, occurred for 88.0323% of the 5561 timesteps. </_Cadence>
    </TemporalDescription>
    <ObservedRegion/>
    <_ObservedRegion>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ObservedRegion.json</_ObservedRegion>
    <ProcessingLevel/>
    <_ProcessingLevel>Processing level is not available in the master file; it should be there instead of, say, https://github.com/rweigel/cdawmeta-spase/blob/main/ProcessingLevel.json</_ProcessingLevel>
    <InstrumentID/>
    <MeasurementType/>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb. Please also acknowledge the data producer: G. Collinson at NASA GSFC / Catholic University of America</Acknowledgement>
      <Style>Listing</Style>
      <AccessURL>
        <Name>HTTPS from SPDF</Name>
        <URL>https://cdaweb.gsfc.nasa.gov/pub/data/sounding_rockets/endurance/endurance-2022/cdf</URL>
        <Description>In CDF via HTTP from CDAWeb</Description>
        <AccessFilenameTemplate>endurance_l2-gf_pes_%Y%m%d_%Q.cdf</AccessFilenameTemplate>
        <ProductKey>ENDURANCE_L2-GF_PES</ProductKey>
      </AccessURL>
      <Format>CDF</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb. Please also acknowledge the data producer: G. Collinson at NASA GSFC / Catholic University of America</Acknowledgement>
      <Style>Listing</Style>
      <AccessURL>
        <Name>FTPS from SPDF</Name>
        <URL>ftps://cdaweb.gsfc.nasa.gov/pub/data/sounding_rockets/endurance/endurance-2022/cdf</URL>
        <Description>In CDF via HTTP from CDAWeb</Description>
        <AccessFilenameTemplate>endurance_l2-gf_pes_%Y%m%d_%Q.cdf</AccessFilenameTemplate>
        <ProductKey>ENDURANCE_L2-GF_PES</ProductKey>
      </AccessURL>
      <Format>CDF</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb. Please also acknowledge the data producer: G. Collinson at NASA GSFC / Catholic University of America</Acknowledgement>
      <AccessURL>
        <Name>CDAWeb Web Service</Name>
        <URL>https://cdaweb.gsfc.nasa.gov/WebServices/</URL>
        <Style>WebService</Style>
        <Description>Instructions for using web services to access this dataset an other other metadata and options for CDAWeb datasets. The ProductKey here corresponds to the query parameter 'dataset' in the tables at the AccessURL in a dataset-related request can be made.</Description>
        <ProductKey>ENDURANCE_L2-GF_PES</ProductKey>
      </AccessURL>
      <Format>CDF</Format>
      <Format>CSV</Format>
      <Format>GIF</Format>
      <Format>NetCDF</Format>
      <Format>PNG</Format>
      <Format>PS</Format>
      <Format>PDF</Format>
      <Format>XML</Format>
      <Format>x_Script.IDL</Format>
      <Format>x_Script.Python</Format>
      <Format>Text.ASCII</Format>
      <Format>x_WAV</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb. Please also acknowledge the data producer: G. Collinson at NASA GSFC / Catholic University of America</Acknowledgement>
      <AccessURL>
        <Name>CDAWeb Web Service user interface</Name>
        <URL>https://cdaweb.gsfc.nasa.gov/cgi-bin/eval2.cgi?index=sp_phys&amp;dataset=ENDURANCE_L2-GF_PES</URL>
        <Style>WebService</Style>
        <ProductKey>ENDURANCE_L2-GF_PES</ProductKey>
        <Description>Web service user interface for this product.</Description>
      </AccessURL>
      <Format>CDF</Format>
      <Format>GIF</Format>
      <Format>PDF</Format>
      <Format>Text.ASCII</Format>
      <Format>x_WAV</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb. Please also acknowledge the data producer: G. Collinson at NASA GSFC / Catholic University of America</Acknowledgement>
      <AccessURL>
        <Name>CDAWeb Python Script</Name>
        <URL>https://cdaweb.gsfc.nasa.gov/WS/cdasr/1/dataviews/sp_phys/datasets/ENDURANCE_L2-GF_PES/clientLibraryExample/</URL>
        <ProductKey>ENDURANCE_L2-GF_PES</ProductKey>
        <Style>WebService</Style>
        <Description>Web service that generates a Python script to access this product.</Description>
      </AccessURL>
      <Format>x_Script.IDL</Format>
      <Format>x_Script.Python</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/SSCWeb. Please also acknowledge the data producer: G. Collinson at NASA GSFC / Catholic University of America</Acknowledgement>
      <AccessURL>
        <Name>4D Orbit Viewer</Name>
        <URL>https://sscweb.gsfc.nasa.gov/4dorbit/?sc=ENDURANCE_L2-GF_PES</URL>
        <ProductKey>ENDURANCE_L2-GF_PES</ProductKey>
        <Style>x_Visualization</Style>
        <Description>Web Service to this product.</Description>
      </AccessURL>
      <Format>HTML</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: G. Collinson at NASA GSFC / Catholic University of America</Acknowledgement>
      <AccessURL>
        <Name>CDAWeb HAPI Server</Name>
        <URL>https://hapi-server.org/servers/#server=CDAWeb&amp;dataset=ENDURANCE_L2-GF_PES</URL>
        <Style>HAPI</Style>
        <ProductKey>ENDURANCE_L2-GF_PES</ProductKey>
        <Description>Web Service to this product using the HAPI interface.</Description>
      </AccessURL>
      <Format>CSV</Format>
      <Format>JSON</Format>
      <Format>Binary</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: G. Collinson at NASA GSFC / Catholic University of America</Acknowledgement>
      <AccessURL>
        <Name>CDAWeb HAPI Script in Multiple Languages</Name>
        <URL>https://hapi-server.org/servers/#server=CDAWeb&amp;dataset=ENDURANCE_L2-GF_PES&amp;return=script</URL>
        <Style>HAPI</Style>
        <ProductKey>ENDURANCE_L2-GF_PES</ProductKey>
        <Description>Web Service user interface that generates scripts in IDL, Javascript, MATLAB, Python, Autoplot, curl, wget to access this product. See https://hapi-server.org/servers/api for the API.</Description>
      </AccessURL>
      <Format>x_Script.IDL</Format>
      <Format>x_Script.Javascript</Format>
      <Format>x_Script.MATLAB</Format>
      <Format>x_Script.Python</Format>
      <Format>x_Script.Autoplot</Format>
      <Format>x_Script.curl</Format>
      <Format>x_Script.wget</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: G. Collinson at NASA GSFC / Catholic University of America</Acknowledgement>
      <AccessURL>
        <Name>HAPI visualizations</Name>
        <URL>https://hapi-server.org/plot/?server=https://cdaweb.gsfc.nasa.gov/hapi&amp;dataset=ENDURANCE_L2-GF_PES&amp;format=gallery</URL>
        <Style>x_Visualization</Style>
        <ProductKey>ENDURANCE_L2-GF_PES</ProductKey>
        <Description>Web Service that generates plots. See https://hapi-server.org/plot/ for the API.</Description>
      </AccessURL>
      <Format>PNG</Format>
      <Format>PDF</Format>
      <Format>SVG</Format>
    </AccessInformation>
    <Keyword>Endurance (from all.xml/observatory/description/@short)</Keyword>
    <Keyword>Photoelectron Spectrometer (from all.xml/instrument/description/@short)</Keyword>
    <Keyword>Space Physics (from Master/CDFglobalAttributes/Discipline)</Keyword>
    <Keyword>Ionospheric Science (from Master/CDFglobalAttributes/Discipline)</Keyword>
    <Keyword>Endurance (from Master/CDFglobalAttributes/Source_name)</Keyword>
    <Keyword>L2-GF (from Master/CDFglobalAttributes/Data_type)</Keyword>
    <Keyword>Level 2 Geometric Factor Time Series (from Master/CDFglobalAttributes/Data_type)</Keyword>
    <Keyword>PES (from all.xml/instrument/@ID)</Keyword>
    <Parameter2>
      <Name>Time</Name>
      <ParameterKey>Epoch</ParameterKey>
      <Description>CATDESC: 'Time start of avg interval'. Notes not in Master CDF: 'The units are the units in CDF files. For other web services, this variable is may be represented as a time string.'</Description>
      <Units>ms</Units>
      <Support>
        <Qualifier>Scalar</Qualifier>
        <SupportQuantity>Temporal</SupportQuantity>
      </Support>
    </Parameter2>
    <Parameter2>
      <Name>PES Step</Name>
      <ParameterKey>step</ParameterKey>
      <Description>Master CDF CATDESC: 'Photoelectron Spectrometer Energy Step'. Master CDF VAR_NOTES: ' '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units> </Units>
      <FillValue>-99</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>PES_A_GF</Name>
      <ParameterKey>PES_A_GF</ParameterKey>
      <Description>Master CDF CATDESC: 'Variation of geometric factor of PES all sensors, A-side during operation'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>cm^2 sr eV/eV)^-1</Units>
      <FillValue>NaN</FillValue>
      <Structure>
        <Size>8</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>PES_B_GF</Name>
      <ParameterKey>PES_B_GF</ParameterKey>
      <Description>Master CDF CATDESC: 'Variation of geometric factor of PES all sensors, B-side during operation'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>cm^2 sr eV/eV)^-1</Units>
      <FillValue>NaN</FillValue>
      <Structure>
        <Size>8</Size>
      </Structure>
    </Parameter2>
  </NumericalData>
</Spase>
