<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema http://www.spase-group.org/data/schema/spase-2_6_1.xsd">
  <_Note>Nodes prefixed with a _ are not valid SPASE, but are included for debugging. Values prefixed with a x_ are not valid SPASE but may considered for addition for completeness.</_Note>
  <Version>2.6.1</Version>
  <_MasterURL>https://cdaweb.gsfc.nasa.gov/pub/software/cdawlib/0JSONS/po_k0_uvi_00000000_v01.json (from all.xml)</_MasterURL>
  <NumericalData>
    <ResourceID>spase://NASA/NumericalData/POLAR/UVI/K0_CDF</ResourceID>
    <_ResourceID>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ResourceID.json</_ResourceID>
    <ResourceHeader>
      <ResourceName>Polar Ultraviolet Imager, Key Parameters</ResourceName>
      <_ResourceName>Source: Master/CDFglobalAttributes/Logical_source_description</_ResourceName>
      <AlternateName>PO_K0_UVI</AlternateName>
      <_AlternateName>Source: Master/CDFglobalAttributes/Logical_source</_AlternateName>
      <Description>References --------------------1. M. R. Torr, et al., A far ultraviolet imager for the International Solar-Terrestrial Physics mission, Space Sci. Rev., v71, pp329 - 383, 1995Notes ------------------------ 1. The UVI field of view is circular with an 8 degree full width.  The circular image is stored in IMAGE_DATA as a rectangular array of 228 rows and 200 columns.2.  Time information is contained in EPOCH, Time_PB5, IMG_MINUS_MSEC, and IMG_PLUS_MSEC.  3. Pointing information is given in GCI_LOOK_DIR, GEODETIC_LAT, and GEODETIC_LONG. </Description>
      <_Description>Source: Master/CDFglobalAttributes/TEXT</_Description>
      <_Rights>
        <Name>SPDX</Name>
        <Description>Creative Commons Zero v1.0 Universal</Description>
        <URL>https://spdx.org/licenses/CC0-1.0.html</URL>
        <SchemeURI>https://spdx.org/licenses/</SchemeURI>
      </_Rights>
    </ResourceHeader>
    <ProviderResourceName>UVI Key Parameters</ProviderResourceName>
    <DOI>https://doi.org/10.48322/1ac1-5c88</DOI>
    <_DOI>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/DOI.json</_DOI>
    <_AccessInformation>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/AccessInformation.json</_AccessInformation>
    <TemporalDescription>
      <TimeSpan>
        <StartDate>1996-03-01T23:59:59Z</StartDate>
        <StopDate>2008-04-28T23:59:59Z</StopDate>
      </TimeSpan>
      <_TemporalDescription>Generated from all.xml/@timerange_start and all.xml/@timerange_stop</_TemporalDescription>
    </TemporalDescription>
    <_ObservedRegion>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ObservedRegion.json</_ObservedRegion>
    <ProcessingLevel/>
    <_ProcessingLevel>Processing level is not available in the master file; it should be there instead of, say, https://github.com/rweigel/cdawmeta-spase/blob/main/ProcessingLevel.json</_ProcessingLevel>
    <InstrumentID>spase://SMWG/Instrument/POLAR/UVI</InstrumentID>
    <MeasurementType>ImageIntensity</MeasurementType>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb. Please also acknowledge the data producer: G. Parks at U. Washington</Acknowledgement>
      <Style>Listing</Style>
      <AccessURL>
        <Name>HTTPS from SPDF</Name>
        <URL>https://cdaweb.gsfc.nasa.gov/pub/data/polar/uvi/uvi_k0</URL>
        <Description>In CDF via HTTP from CDAWeb</Description>
        <AccessFilenameTemplate>po_k0_uvi_%Y%m%d_%Q.cdf</AccessFilenameTemplate>
        <AccessDirectoryTemplate>%Y</AccessDirectoryTemplate>
        <ProductKey>PO_K0_UVI</ProductKey>
      </AccessURL>
      <Format>CDF</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb. Please also acknowledge the data producer: G. Parks at U. Washington</Acknowledgement>
      <Style>Listing</Style>
      <AccessURL>
        <Name>FTPS from SPDF</Name>
        <URL>ftps://cdaweb.gsfc.nasa.gov/pub/data/polar/uvi/uvi_k0</URL>
        <Description>In CDF via HTTP from CDAWeb</Description>
        <AccessFilenameTemplate>po_k0_uvi_%Y%m%d_%Q.cdf</AccessFilenameTemplate>
        <AccessDirectoryTemplate>%Y</AccessDirectoryTemplate>
        <ProductKey>PO_K0_UVI</ProductKey>
      </AccessURL>
      <Format>CDF</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb. Please also acknowledge the data producer: G. Parks at U. Washington</Acknowledgement>
      <AccessURL>
        <Name>CDAWeb Web Service</Name>
        <URL>https://cdaweb.gsfc.nasa.gov/WebServices/</URL>
        <Style>WebService</Style>
        <Description>Instructions for using web services to access this dataset an other other metadata and options for CDAWeb datasets. The ProductKey here corresponds to the query parameter 'dataset' in the tables at the AccessURL in a dataset-related request can be made.</Description>
        <ProductKey>PO_K0_UVI</ProductKey>
      </AccessURL>
      <Format>CDF</Format>
      <Format>CSV</Format>
      <Format>GIF</Format>
      <Format>NetCDF</Format>
      <Format>PNG</Format>
      <Format>PS</Format>
      <Format>PDF</Format>
      <Format>XML</Format>
      <Format>x_Script.IDL</Format>
      <Format>x_Script.Python</Format>
      <Format>Text.ASCII</Format>
      <Format>x_WAV</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb. Please also acknowledge the data producer: G. Parks at U. Washington</Acknowledgement>
      <AccessURL>
        <Name>CDAWeb Web Service user interface</Name>
        <URL>https://cdaweb.gsfc.nasa.gov/cgi-bin/eval2.cgi?index=sp_phys&amp;dataset=PO_K0_UVI</URL>
        <Style>WebService</Style>
        <ProductKey>PO_K0_UVI</ProductKey>
        <Description>Web service user interface for this product.</Description>
      </AccessURL>
      <Format>CDF</Format>
      <Format>GIF</Format>
      <Format>PDF</Format>
      <Format>Text.ASCII</Format>
      <Format>x_WAV</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb. Please also acknowledge the data producer: G. Parks at U. Washington</Acknowledgement>
      <AccessURL>
        <Name>CDAWeb Python Script</Name>
        <URL>https://cdaweb.gsfc.nasa.gov/WS/cdasr/1/dataviews/sp_phys/datasets/PO_K0_UVI/clientLibraryExample/</URL>
        <ProductKey>PO_K0_UVI</ProductKey>
        <Style>WebService</Style>
        <Description>Web service that generates a Python script to access this product.</Description>
      </AccessURL>
      <Format>x_Script.IDL</Format>
      <Format>x_Script.Python</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/SSCWeb. Please also acknowledge the data producer: G. Parks at U. Washington</Acknowledgement>
      <AccessURL>
        <Name>4D Orbit Viewer</Name>
        <URL>https://sscweb.gsfc.nasa.gov/4dorbit/?sc=PO_K0_UVI</URL>
        <ProductKey>PO_K0_UVI</ProductKey>
        <Style>x_Visualization</Style>
        <Description>Web Service to this product.</Description>
      </AccessURL>
      <Format>HTML</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: G. Parks at U. Washington</Acknowledgement>
      <AccessURL>
        <Name>CDAWeb HAPI Server</Name>
        <URL>https://hapi-server.org/servers/#server=CDAWeb&amp;dataset=PO_K0_UVI</URL>
        <Style>HAPI</Style>
        <ProductKey>PO_K0_UVI</ProductKey>
        <Description>Web Service to this product using the HAPI interface.</Description>
      </AccessURL>
      <Format>CSV</Format>
      <Format>JSON</Format>
      <Format>Binary</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: G. Parks at U. Washington</Acknowledgement>
      <AccessURL>
        <Name>CDAWeb HAPI Script in Multiple Languages</Name>
        <URL>https://hapi-server.org/servers/#server=CDAWeb&amp;dataset=PO_K0_UVI&amp;return=script</URL>
        <Style>HAPI</Style>
        <ProductKey>PO_K0_UVI</ProductKey>
        <Description>Web Service user interface that generates scripts in IDL, Javascript, MATLAB, Python, Autoplot, curl, wget to access this product. See https://hapi-server.org/servers/api for the API.</Description>
      </AccessURL>
      <Format>x_Script.IDL</Format>
      <Format>x_Script.Javascript</Format>
      <Format>x_Script.MATLAB</Format>
      <Format>x_Script.Python</Format>
      <Format>x_Script.Autoplot</Format>
      <Format>x_Script.curl</Format>
      <Format>x_Script.wget</Format>
    </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <Acknowledgement>SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: G. Parks at U. Washington</Acknowledgement>
      <AccessURL>
        <Name>HAPI visualizations</Name>
        <URL>https://hapi-server.org/plot/?server=https://cdaweb.gsfc.nasa.gov/hapi&amp;dataset=PO_K0_UVI&amp;format=gallery</URL>
        <Style>x_Visualization</Style>
        <ProductKey>PO_K0_UVI</ProductKey>
        <Description>Web Service that generates plots. See https://hapi-server.org/plot/ for the API.</Description>
      </AccessURL>
      <Format>PNG</Format>
      <Format>PDF</Format>
      <Format>SVG</Format>
    </AccessInformation>
    <Keyword>Polar Plasma Laboratory (from all.xml/observatory/description/@short)</Keyword>
    <Keyword>Ultraviolet Imager (from all.xml/instrument/description/@short)</Keyword>
    <Keyword>Space Physics (from Master/CDFglobalAttributes/Discipline)</Keyword>
    <Keyword>Magnetospheric Science (from Master/CDFglobalAttributes/Discipline)</Keyword>
    <Keyword>POLAR (from Master/CDFglobalAttributes/Source_name)</Keyword>
    <Keyword>Polar Plasma Laboratory (from Master/CDFglobalAttributes/Source_name)</Keyword>
    <Keyword>K0 (from Master/CDFglobalAttributes/Data_type)</Keyword>
    <Keyword>Key Parameter (from Master/CDFglobalAttributes/Data_type)</Keyword>
    <Keyword>UVI (from all.xml/instrument/@ID)</Keyword>
    <ObservedRegion>Earth.NearSurface.Ionosphere</ObservedRegion>
    <ObservedRegion>Earth.Magnetosphere</ObservedRegion>
    <ObservedRegion>Earth.NearSurface.AuroralRegion</ObservedRegion>
    <ObservedRegion>Earth.NearSurface.EquatorialRegion</ObservedRegion>
    <ObservedRegion>Earth.NearSurface.Plasmasphere</ObservedRegion>
    <ObservedRegion>Earth.Magnetosphere.Polar</ObservedRegion>
    <ObservedRegion>Heliosphere.Inner</ObservedRegion>
    <ObservedRegion>Earth.NearSurface.PolarCap</ObservedRegion>
    <ObservedRegion>Earth.Magnetosphere.RadiationBelt</ObservedRegion>
    <ObservedRegion>Earth.NearSurface</ObservedRegion>
    <Parameter2>
      <Name>Time Line</Name>
      <ParameterKey>Epoch</ParameterKey>
      <Description>CATDESC: 'Image time.'. Notes not in Master CDF: 'The units are the units in CDF files. For other web services, this variable is may be represented as a time string.'</Description>
      <Units>ms</Units>
      <Support>
        <Qualifier>Scalar</Qualifier>
        <SupportQuantity>Temporal</SupportQuantity>
      </Support>
    </Parameter2>
    <Parameter2>
      <Name>Time Line</Name>
      <ParameterKey>Time_PB5</ParameterKey>
      <Description>Master CDF CATDESC: 'Image time.'. Master CDF VAR_NOTES: 'The time in EPOCH and Time_PB5 refer to the center of the image in IMAGE_DATA.  There is an offset of up to 8 major frames between the beginning of the image exposure and the ATC telemetry time stamp.  The times shown here are corrected for this and describe the actual time of exposure.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <FillValue>-2147483648</FillValue>
      <Structure>
        <Size>3</Size>
      </Structure>
      <Units>year</Units>
      <Units>day</Units>
      <Units>msec</Units>
    </Parameter2>
    <Parameter2>
      <Name>Relative beginning of image</Name>
      <ParameterKey>IMG_MINUS_MSEC</ParameterKey>
      <Description>Master CDF CATDESC: 'The start of the image, measured from EPOCH/Time_PB5.'. Master CDF VAR_NOTES: 'The beginning and ending time of the image is specified in msec relative to the time in EPOCH and Time_PB5 by IMG_MINUS_MSEC and IMG_PLUS_MSEC, respectively.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>ms</Units>
      <FillValue>-1e+31</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>Relative end of image</Name>
      <ParameterKey>IMG_PLUS_MSEC</ParameterKey>
      <Description>Master CDF CATDESC: 'The end of the image, measured from EPOCH/Time_PB5.'. Master CDF VAR_NOTES: 'The beginning and ending time of the image is specified in msec relative to the time in EPOCH and Time_PB5 by IMG_MINUS_MSEC and IMG_PLUS_MSEC, respectively. '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>ms</Units>
      <FillValue>-1e+31</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>Post Gap Flag</Name>
      <ParameterKey>POST_GAP_FLAG</ParameterKey>
      <Description>Master CDF CATDESC: 'Explanation of preceding gap.'. Master CDF VAR_NOTES: 'A gap is defined if the time between records is greater than twice the nominal output time (NOMINAL_OUTPUT_PERIOD).  The following values are defined for POST_GAP_FLAG: O = No Gap; 1 = Wrong Mode; 2 = Missing Data; 3 = Noisy Data; 4-9 = undefined; 10 = High voltage not enabled; 11 = gain set to zero; 12 =The first minor frame containing UVI housekeeping was zero filled 13 = Unable to sync with telemetry stream; 14 = No background images were present; 15 = Requested filter setting was not present; 16 = Spacecraft was near perigee pass where no kp's are generated; 17 = Despun platform was pointing away from the earth; 18 = Image data lay outside requested process window (Not used for production); 19 = Unknown. Note that long gaps may be caused by multiple events.  POST_GAP_FLAG attempts to represent the most severe event contributing to the gap. Also, since each image frame requires a minimum of 4 major frames (36.8 s) very short values of NOMINAL_OUTPUT_PERIOD on the order of 1 minute may always encounter a gap since the desired images may be several minutes apart.  This condition is not trapped and will result in an unknown value for the post gap flag.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units> </Units>
      <FillValue>-2147483648</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>Quality Flag</Name>
      <ParameterKey>QUALITY_FLAG</ParameterKey>
      <Description>Master CDF CATDESC: 'Quality indicator (also quickly shows times when images are available)'. Master CDF VAR_NOTES: 'QUALITY_FLAG is a  bit-mapped flag in which each bit corresponds to a single quality condition.  The most  significant bit (minus sign) is not used.  Consequently up to 31 different quality conditions can be simultaneously flagged.  The flags are ordered in severity with increasing bit position.  The following _hexadecimal_ values have been defined  for QUALITY_FLAG: 0 = No errors or quality conditions;  1 = an error occurred writing an SFDU comment; 2 =  image time was outside of selected processing window; 4 = some level zero minor frames had fill values;  8 = some level zero minor frames had sync errors; 10 = the image single frame integration period could not be determined due to bad telemetry (assumed to be 4 major frames);  20 = the despun platform was in motion or had not settled down from a motion;   40 = the pointing calculations have not been validated or may be unreliable;  80 = the time flags for this image may be unreliable; 100 = there was an error decode star mode data; 200 =some major frames were missing but an image could be partially  reconstructed;  400 = calibration data is missing or otherwise invalid;  800 = a background image could not be found; 1000 = the  requested output image could not be found.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units> </Units>
      <FillValue>-2147483648</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>Nominal Time Between Records</Name>
      <ParameterKey>NOMINAL_OUTPUT_PERIOD</ParameterKey>
      <Description>Master CDF CATDESC: 'Nominal time between output records.'. Master CDF VAR_NOTES: 'This is the nominal time between output records.  The actual output spacing will vary depending on the nature of the observing sequences being run.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>minutes</Units>
      <FillValue>-2147483648</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>Primary/secondary detectors</Name>
      <ParameterKey>SYSTEM</ParameterKey>
      <Description>Master CDF CATDESC: 'Operating system.'. Master CDF VAR_NOTES: 'UVI has two independent systems. PRIMARY: +1, SECONDARY: -1'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units> </Units>
      <FillValue>-2147483648</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>Observing sequence</Name>
      <ParameterKey>SEQ</ParameterKey>
      <Description>Master CDF CATDESC: 'Predefined sequence of observations. Definitions will change over mission.'. Master CDF VAR_NOTES: ' '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units> </Units>
      <FillValue>-2147483648</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>Observing mode</Name>
      <ParameterKey>MODE</ParameterKey>
      <Description>Master CDF CATDESC: 'Instrument operating mode.'. Master CDF VAR_NOTES: '(1=Normal, 2=Star, 3=Idle) Normal mode produces one 200 x 228 image every 4 major frames.  Star mode produces multiple miniframe images every major frame.  Idle mode produces no image output.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units> </Units>
      <FillValue>-2147483648</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>Detector Gain Setting</Name>
      <ParameterKey>GAIN</ParameterKey>
      <Description>Master CDF CATDESC: 'Detector gain setting'. Master CDF VAR_NOTES: '0=off, 16=highest sensitivity '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units> </Units>
      <FillValue>-2147483648</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>Aperture door position</Name>
      <ParameterKey>DOOR</ParameterKey>
      <Description>Master CDF CATDESC: 'Aperture door position'. Master CDF VAR_NOTES: '(OPEN: +1, CLOSED: -1) MgF2 window in door allows viewing when closed.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units> </Units>
      <FillValue>-2147483648</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>FUV Image</Name>
      <ParameterKey>IMAGE_DATA</ParameterKey>
      <Description>Master CDF CATDESC: 'Far UV Images (kRay), small format display with click-expand (~10 min res)'. Master CDF VAR_NOTES: 'The UVI field of view is circular with an 8 degree full width.  The circular image is stored in IMAGE_DATA as a rectangular array of 228 rows and 200 columns.  Consequently, the corners of each image contain non-image data.  The non-active corner pixel locations are identified by a corner fill value = -128.  The image is oriented such that the direction of decreasing row number points along the spacecraft spin axis.  The direction of decreasing column number points to the outboard direction (relative to the spin axis).  The orientation is the same for both detectors.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>photon cm^-2 s^-1</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>FUV Image Large Format</Name>
      <ParameterKey>IMAGE_DATA_LF</ParameterKey>
      <Description>Master CDF CATDESC: ' --&gt; (USE SHORT TIME SPANS) Large format display with click-expand, no geographic registration'. Master CDF VAR_NOTES: 'The UVI field of view is circular with an 8 degree full width.  The circular image is stored in IMAGE_DATA as a rectangular array of 228 rows and 200 columns.  Consequently, the corners of each image contain non-image data.  The non-active corner pixel locations are identified by a corner fill value = -128.  The image is oriented such that the direction of decreasing row number points along the spacecraft spin axis.  The direction of decreasing column number points to the outboard direction (relative to the spin axis).  The orientation is the same for both detectors.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>photon cm^-2 s^-1</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>Geodetic Latitude</Name>
      <ParameterKey>GEODETIC_LAT</ParameterKey>
      <Description>Master CDF CATDESC: 'Geodetic latitude for IMAGE_DATA (23 x 20 pixels)'. Master CDF VAR_NOTES: 'Sparse matrices (every 10 pixels) of latitude and longitude are given in GEODETIC_LAT and GEODETIC_LONG, respectively.  Latitude &amp; longitude are given in geodetic coordinates (determined from the normal to the assumed surface of the earth [assumed to be an ellipsoid of revolution]) and not in geocentric coordinates (determined relative to the center of the earth).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>Degrees</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>23</Size>
        <Size>20</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>Geodetic Longitude</Name>
      <ParameterKey>GEODETIC_LONG</ParameterKey>
      <Description>Master CDF CATDESC: 'Geodetic longitude for IMAGE_DATA (23 x 20 pixels)'. Master CDF VAR_NOTES: 'Sparse matrices (every 10 pixels) of latitude and longitude are given in GEODETIC_LAT and GEODETIC_LONG, respectively.  Latitude &amp; longitude are given in geodetic coordinates (determined from the normal to the assumed surface of the earth [assumed to be an ellipsoid of revolution]) and not in geocentric coordinates (determined relative to the center of the earth).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>Degrees</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>23</Size>
        <Size>20</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>Computed Geodetic Latitude</Name>
      <ParameterKey>GEOD_LAT</ParameterKey>
      <Description>Master CDF CATDESC: 'Image registered geodetic latitude'. Master CDF VAR_NOTES: 'This is a virtual variable computed in read_myCDF. Calling conv_map_image w/ the component variables results in the image registered latitudes.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>degrees</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>Computed Geodetic Longitude</Name>
      <ParameterKey>GEOD_LONG</ParameterKey>
      <Description>Master CDF CATDESC: 'Image registered geodetic longitude'. Master CDF VAR_NOTES: 'This is a virtual variable computed in read_myCDF. Calling conv_map_image w/ the component variables results in the image registered longitudes.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>degrees</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>Map FUV Image Overlay</Name>
      <ParameterKey>GEOD_IMAGE_O</ParameterKey>
      <Description>Master CDF CATDESC: ' --&gt; (USE SHORT TIME SPANS) With geographic map overlay'. Master CDF VAR_NOTES: 'This is a virtual variable computed in read_myCDF'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>photon cm^-2 s^-1</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>Map FUV Image Overlay</Name>
      <ParameterKey>GEOD_IMAGE</ParameterKey>
      <Description>Master CDF CATDESC: ' --&gt; [DO NOT USE: UNDER-DEVELOPMENT] Test Display'. Master CDF VAR_NOTES: 'This is a virtual variable computed in read_myCDF'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>photon cm^-2 s^-1</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>Pole Centered Map FUV Image - Sun</Name>
      <ParameterKey>GEOD_IMAGE_PS</ParameterKey>
      <Description>Master CDF CATDESC: ' --&gt; (USE SHORT TIME SPANS) Azimuthal projection to geographic (with fixed sun orientation)'. Master CDF VAR_NOTES: 'This is a virtual variable computed in read_myCDF. Calling conv_map_image'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>photon cm^-2 s^-1</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>Pole Centered Map FUV Image - MLT</Name>
      <ParameterKey>GEOD_IMAGE_M</ParameterKey>
      <Description>Master CDF CATDESC: ' --&gt; (USE SHORT TIME SPANS) Azimuthal projection to magnetic LT and invariant lat, using eccentric dipole model'. Master CDF VAR_NOTES: 'This is a virtual variable computed in read_myCDF. MLT map generated in plot_map_images.pro'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>photon cm^-2 s^-1</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>FUV Image Movie</Name>
      <ParameterKey>IMAGE_MOVIE</ParameterKey>
      <Description>Master CDF CATDESC: ' --&gt; (USE SHORT TIME SPANS) Movie display of images, no geographic registration'. Master CDF VAR_NOTES: 'This is a virtual variable computed in read_myCDF'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>photon cm^-2 s^-1</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>Map FUV Image Overlay (movie)</Name>
      <ParameterKey>IMAGE_MOVIE_O</ParameterKey>
      <Description>Master CDF CATDESC: ' --&gt; (USE SHORT TIME SPANS) Movie, with geographic map overlay'. Master CDF VAR_NOTES: 'This is a virtual variable computed in read_myCDF'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>photon cm^-2 s^-1</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>Pole Centered Map FUV Image - Sun (movie)</Name>
      <ParameterKey>IMAGE_MOVIE_PS</ParameterKey>
      <Description>Master CDF CATDESC: ' --&gt; (USE SHORT TIME SPANS) Movie, azimuthal projection to geographic (with fixed sun orientation)'. Master CDF VAR_NOTES: 'This is a virtual variable computed in read_myCDF. Calling conv_map_image'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>photon cm^-2 s^-1</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>Pole Centered Map FUV Image - MLT (movie)</Name>
      <ParameterKey>IMAGE_MOVIE_M</ParameterKey>
      <Description>Master CDF CATDESC: ' --&gt; (USE SHORT TIME SPAN) Movie, azimuthal projection to magnetic LT and invariant lat, using eccentric dipole model'. Master CDF VAR_NOTES: 'This is a virtual variable computed in read_myCDF. MLT map generated in plot_map_images.pro'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>photon cm^-2 s^-1</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>228</Size>
        <Size>200</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>GCI Spacecraft Position Vector</Name>
      <ParameterKey>GCI_POSITION</ParameterKey>
      <Description>Master CDF CATDESC: 'Spacecraft Position in GCI, 3 comp.'. Master CDF VAR_NOTES: 'Copied from S/C orbit file.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units> km </Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>3</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>GCI Spacecraft Attitude Vector</Name>
      <ParameterKey>ATTITUDE</ParameterKey>
      <Description>Master CDF CATDESC: 'Spacecraft Attitude in GCI, 3 comp.'. Master CDF VAR_NOTES: 'Calculated from S/C attitude file.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>  </Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>3</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>GCI Sun Vector</Name>
      <ParameterKey>GCI_SUN</ParameterKey>
      <Description>Master CDF CATDESC: 'Sun Position in GCI, 3 comp.'. Master CDF VAR_NOTES: 'Vector pointing to sun.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>km</Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>3</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>GCI Look Direction</Name>
      <ParameterKey>GCI_LOOK_DIR</ParameterKey>
      <Description>Master CDF CATDESC: 'Unit vector along field of view.'. Master CDF VAR_NOTES: 'GCI_LOOK_DIR is a unit vector in GCI coordinates pointing from the spacecraft along the center of the UVI line of sight.  An external utility can be used to calculate latitude and longitude for any pixel of the UVI image.The pointing utility can be found on the UVI WWW home page (URL: TBD)  '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units> </Units>
      <FillValue>-1e+31</FillValue>
      <Structure>
        <Size>3</Size>
      </Structure>
    </Parameter2>
    <Parameter2>
      <Name>DSP Nadir Offset Angle</Name>
      <ParameterKey>DSP_ANGLE</ParameterKey>
      <Description>Master CDF CATDESC: 'Offset angle of despun platform from nadir.  '. Master CDF VAR_NOTES: 'Positive in direction opposite of spacecraft rotation.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units>Degree</Units>
      <FillValue>-1e+31</FillValue>
    </Parameter2>
    <Parameter2>
      <Name>Image Type</Name>
      <ParameterKey>FILTER</ParameterKey>
      <Description>Master CDF CATDESC: 'Filter selection.'. Master CDF VAR_NOTES: '1304=2, 1356=3, LBHS=4, LBHL=5, SOLR=6'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'</Description>
      <Units> </Units>
      <FillValue>-2147483648</FillValue>
    </Parameter2>
  </NumericalData>
</Spase>
