{
  "Spase": {
    "xmlns": "http://www.spase-group.org/data/schema",
    "xmlns:xsi": "http://www.w3.org/2001/XMLSchema-instance",
    "xsi:schemaLocation": "http://www.spase-group.org/data/schema http://www.spase-group.org/data/schema/spase-2_6_1.xsd",
    "_Note": "Nodes prefixed with a _ are not valid SPASE, but are included for debugging. Values prefixed with a x_ are not valid SPASE but may considered for addition for completeness.",
    "Version": "2.6.1",
    "_MasterURL": "https://cdaweb.gsfc.nasa.gov/pub/software/cdawlib/0JSONS/psp_fld_l2_aeb_00000000_v01.json (from all.xml)",
    "NumericalData": {
      "ResourceID": "spase://NASA/NumericalData/ParkerSolarProbe/FIELDS/AEB/Level2/PT1H",
      "_ResourceID": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ResourceID.json",
      "ResourceHeader": {
        "ResourceName": "PSP FIELDS L2 Data from Antenna Electronics Board (AEB)",
        "_ResourceName": "Source: Master/CDFglobalAttributes/Logical_source_description",
        "AlternateName": "psp_fld_l2_aeb",
        "_AlternateName": "Source: Master/CDFglobalAttributes/Logical_source",
        "Description": "PSP FIELDS AEB.",
        "_Description": "Source: Master/CDFglobalAttributes/TEXT",
        "_Rights": {
          "Name": "SPDX",
          "Description": "Creative Commons Zero v1.0 Universal",
          "URL": "https://spdx.org/licenses/CC0-1.0.html",
          "SchemeURI": "https://spdx.org/licenses/"
        },
        "InformationURL": [
          {
            "Name": "PSP FIELDS Instrument Suite, Space Science Review Publication",
            "URL": "https://doi.org/10.1007/s11214-016-0244-5",
            "Description": "Parker Solar Probe, PSP, FIELDS Instrument Suite Description: Bale, S.D., Goetz, K., Harvey, P.R. et al., The FIELDS Instrument Suite for Solar Probe Plus, Space Sci Rev 204, 49-82 (2016)",
            "_Note": "Source: InformationURL.json"
          },
          {
            "Name": "PSP FIELDS Instrument Suite, Digital Fields Board, JGR Space Physics Publication",
            "URL": "https://doi.org/10.1002/2016JA022344",
            "Description": "Parker Solar Probe, PSP, FIELDS Instrument Suite, Digital Fields Board, DFB, Description: Malaspina, D.M., Ergun, R.E., Bolton, M. et al., The Digital Fields Board for the FIELDS Instrument Suite on the Solar Probe Plus Mission: Analog and Digital signal Processing, JGR Space Physics, 121, 5088-5096 (2016)",
            "_Note": "Source: InformationURL.json"
          },
          {
            "Name": "PSP FIELDS Instrument Suite, Data Description, SOC Web Site, UC Berkeley",
            "URL": "https://fields.ssl.berkeley.edu/data/",
            "Description": "Parker Solar Probe, PSP, FIELDS Instrument Suite, Data Description and Access, Spacecraft Operations Center, SOC, Web Site, UC Berkeley",
            "_Note": "Source: InformationURL.json"
          },
          {
            "Name": "PSP FIELDS Instrument Suite, Rules of the Road, SOC Web Site, UC Berkeley",
            "URL": "https://fields.ssl.berkeley.edu/rules/",
            "Description": "Parker Solar Probe, PSP, FIELDS Instrument Suite, Rules of the Road, Spacecraft Operations Center, SOC, Web Site, UC Berkeley",
            "_Note": "Source: InformationURL.json"
          }
        ]
      },
      "ProviderResourceName": "PSP FIELDS AEB",
      "DOI": "https://doi.org/10.48322/ydvh-f703",
      "_DOI": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/DOI.json",
      "AccessInformation": [
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Stuart D. Bale (bale@ssl.berkeley.edu) at UC Berkeley Space Sciences Laboratory",
          "Format": [
            "CDF"
          ],
          "Style": "Listing",
          "AccessURL": {
            "Name": "HTTPS from SPDF",
            "URL": "https://cdaweb.gsfc.nasa.gov/pub/data/psp/fields/l2/aeb",
            "Description": "In CDF via HTTP from CDAWeb",
            "AccessFilenameTemplate": "psp_fld_l2_aeb_%Y%m%d_%Q.cdf",
            "AccessDirectoryTemplate": "%Y",
            "ProductKey": "PSP_FLD_L2_AEB"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Stuart D. Bale (bale@ssl.berkeley.edu) at UC Berkeley Space Sciences Laboratory",
          "Format": [
            "CDF"
          ],
          "Style": "Listing",
          "AccessURL": {
            "Name": "FTPS from SPDF",
            "URL": "ftps://cdaweb.gsfc.nasa.gov/pub/data/psp/fields/l2/aeb",
            "Description": "In CDF via HTTP from CDAWeb",
            "AccessFilenameTemplate": "psp_fld_l2_aeb_%Y%m%d_%Q.cdf",
            "AccessDirectoryTemplate": "%Y",
            "ProductKey": "PSP_FLD_L2_AEB"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Stuart D. Bale (bale@ssl.berkeley.edu) at UC Berkeley Space Sciences Laboratory",
          "Format": [
            "CDF",
            "CSV",
            "GIF",
            "NetCDF",
            "PNG",
            "PS",
            "PDF",
            "XML",
            "x_Script.IDL",
            "x_Script.Python",
            "Text.ASCII",
            "x_WAV"
          ],
          "AccessURL": {
            "Name": "CDAWeb Web Service",
            "URL": "https://cdaweb.gsfc.nasa.gov/WebServices/",
            "Style": "WebService",
            "Description": "Instructions for using web services to access this dataset an other other metadata and options for CDAWeb datasets. The ProductKey here corresponds to the query parameter 'dataset' in the tables at the AccessURL in a dataset-related request can be made.",
            "ProductKey": "PSP_FLD_L2_AEB"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Stuart D. Bale (bale@ssl.berkeley.edu) at UC Berkeley Space Sciences Laboratory",
          "Format": [
            "CDF",
            "GIF",
            "PDF",
            "Text.ASCII",
            "x_WAV"
          ],
          "AccessURL": {
            "Name": "CDAWeb Web Service user interface",
            "URL": "https://cdaweb.gsfc.nasa.gov/cgi-bin/eval2.cgi?index=sp_phys&dataset=PSP_FLD_L2_AEB",
            "Style": "WebService",
            "ProductKey": "PSP_FLD_L2_AEB",
            "Description": "Web service user interface for this product."
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Stuart D. Bale (bale@ssl.berkeley.edu) at UC Berkeley Space Sciences Laboratory",
          "Format": [
            "x_Script.IDL",
            "x_Script.Python"
          ],
          "AccessURL": {
            "Name": "CDAWeb Python Script",
            "URL": "https://cdaweb.gsfc.nasa.gov/WS/cdasr/1/dataviews/sp_phys/datasets/PSP_FLD_L2_AEB/clientLibraryExample/",
            "ProductKey": "PSP_FLD_L2_AEB",
            "Style": "WebService",
            "Description": "Web service that generates a Python script to access this product."
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/SSCWeb. Please also acknowledge the data producer: Stuart D. Bale (bale@ssl.berkeley.edu) at UC Berkeley Space Sciences Laboratory",
          "Format": [
            "HTML"
          ],
          "AccessURL": {
            "Name": "4D Orbit Viewer",
            "URL": "https://sscweb.gsfc.nasa.gov/4dorbit/?sc=PSP_FLD_L2_AEB",
            "ProductKey": "PSP_FLD_L2_AEB",
            "Style": "x_Visualization",
            "Description": "Web Service to this product."
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Stuart D. Bale (bale@ssl.berkeley.edu) at UC Berkeley Space Sciences Laboratory",
          "Format": [
            "CSV",
            "JSON",
            "Binary"
          ],
          "AccessURL": {
            "Name": "CDAWeb HAPI Server",
            "URL": "https://hapi-server.org/servers/#server=CDAWeb&dataset=PSP_FLD_L2_AEB@0",
            "Style": "HAPI",
            "ProductKey": [
              "PSP_FLD_L2_AEB@0",
              "PSP_FLD_L2_AEB@1"
            ],
            "Description": "Web Service to this product using the HAPI interface. Note that HAPI dataset has a collection of parameters, each having the same time stamps. This CDAWeb dataset contains 2 HAPI-type datasets. The @0, @1, ... at the end of the ParameterKeys indicates the index of the CDAWeb dataset. (The dataset index <=> CDF file time variable pairs are @0 => epoch_aeb1, @1 => epoch_aeb2.)"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Stuart D. Bale (bale@ssl.berkeley.edu) at UC Berkeley Space Sciences Laboratory",
          "Format": [
            "x_Script.IDL",
            "x_Script.Javascript",
            "x_Script.MATLAB",
            "x_Script.Python",
            "x_Script.Autoplot",
            "x_Script.curl",
            "x_Script.wget"
          ],
          "AccessURL": {
            "Name": "CDAWeb HAPI Script in Multiple Languages",
            "URL": "https://hapi-server.org/servers/#server=CDAWeb&dataset=PSP_FLD_L2_AEB@0&return=script",
            "Style": "HAPI",
            "ProductKey": [
              "PSP_FLD_L2_AEB@0",
              "PSP_FLD_L2_AEB@1"
            ],
            "Description": "Web Service user interface that generates scripts in IDL, Javascript, MATLAB, Python, Autoplot, curl, wget to access this product. See https://hapi-server.org/servers/api for the API. Note that HAPI dataset has a collection of parameters, each having the same time stamps. This CDAWeb dataset contains 2 HAPI-type datasets. The @0, @1, ... at the end of the ParameterKeys indicates the index of the CDAWeb dataset. (The dataset index <=> CDF file time variable pairs are @0 => epoch_aeb1, @1 => epoch_aeb2.)"
          }
        },
        {
          "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF",
          "Availability": "Online",
          "AccessRights": "Open",
          "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Stuart D. Bale (bale@ssl.berkeley.edu) at UC Berkeley Space Sciences Laboratory",
          "Format": [
            "PNG",
            "PDF",
            "SVG"
          ],
          "AccessURL": {
            "Name": "HAPI visualizations",
            "URL": "https://hapi-server.org/plot/?server=https://cdaweb.gsfc.nasa.gov/hapi&dataset=PSP_FLD_L2_AEB@0&format=gallery",
            "Style": "x_Visualization",
            "ProductKey": [
              "PSP_FLD_L2_AEB@0",
              "PSP_FLD_L2_AEB@1"
            ],
            "Description": "Web Service that generates plots. See https://hapi-server.org/plot/ for the API."
          }
        }
      ],
      "_AccessInformation": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/AccessInformation.json",
      "TemporalDescription": {
        "TimeSpan": {
          "StartDate": "2018-10-02T03:46:32Z",
          "StopDate": "2025-10-31T23:37:12Z"
        },
        "_TemporalDescription": "Generated from all.xml/@timerange_start and all.xml/@timerange_stop"
      },
      "Keyword": [
        "Parker Solar Probe FIELDS (from all.xml/observatory/description/@short)",
        "Antenna Electronics Board (from all.xml/instrument/description/@short)",
        "Solar Physics (from Master/CDFglobalAttributes/Discipline)",
        "Heliospheric Physics (from Master/CDFglobalAttributes/Discipline)",
        "Space Physics (from Master/CDFglobalAttributes/Discipline)",
        "Interplanetary Studies (from Master/CDFglobalAttributes/Discipline)",
        "PSP_FLD (from Master/CDFglobalAttributes/Source_name)",
        "Parker Solar Probe FIELDS (from Master/CDFglobalAttributes/Source_name)",
        "L2 (from Master/CDFglobalAttributes/Data_type)",
        "Level 2 Data (from Master/CDFglobalAttributes/Data_type)",
        "AEB (from all.xml/instrument/@ID)"
      ],
      "ObservedRegion": [
        "Heliosphere",
        "Heliosphere.Inner",
        "Heliosphere.NearEarth",
        "Sun.Corona"
      ],
      "_ObservedRegion": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ObservedRegion.json",
      "ProcessingLevel": null,
      "_ProcessingLevel": "Processing level is not available in the master file; it should be there instead of, say, https://github.com/rweigel/cdawmeta-spase/blob/main/ProcessingLevel.json",
      "InstrumentID": "spase://SMWG/Instrument/",
      "MeasurementType": "InstrumentStatus",
      "Parameter2": [
        {
          "Name": "epoch_aeb1",
          "ParameterKey": "epoch_aeb1",
          "Description": "CATDESC: 'Time in TT2000 for AEB1 data'. Notes not in Master CDF: 'The units are the units in CDF files. For other web services, this variable is may be represented as a time string.'",
          "Units": "ns",
          "Support": {
            "Qualifier": "Scalar",
            "SupportQuantity": "Temporal"
          }
        },
        {
          "Name": "psp_fld_l2_aeb1_TELEM_FLAG",
          "ParameterKey": "psp_fld_l2_aeb1_TELEM_FLAG",
          "Description": "Master CDF CATDESC: 'Flag indicating source of AEB1 data.'. Master CDF VAR_NOTES: 'This flag indicates whether data is derived directly from AEB telemetry. During normal operations, AEB housekeeping data are returned in telemetry packets. Packets are generated for each update to AEB settings, and periodically for monitoring purposes. Data corresponding to these packets have a flag value of 1. During bias sweeps, settings are updated too rapidly for each change to be telemetered in an individual packet, so the bias settings during the sweep areinferred based on FIELDS instrument command history. Data corresponding to these inferred measurements have a flag value of 0. Data with a flag value of 0 contains only commanded voltages and currents (no measured voltages, currents, or temperatures).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb1_AEB1_TEMP",
          "ParameterKey": "psp_fld_l2_aeb1_AEB1_TEMP",
          "Description": "Master CDF CATDESC: 'Measured temperature of the AEB1 circuit board.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "C",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_PA1_TEMP",
          "ParameterKey": "psp_fld_l2_aeb1_PA1_TEMP",
          "Description": "Master CDF CATDESC: 'Measured temperature of the V1 preamplifier.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "C",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_PA2_TEMP",
          "ParameterKey": "psp_fld_l2_aeb1_PA2_TEMP",
          "Description": "Master CDF CATDESC: 'Measured temperature of the V2 preamplifier.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "C",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_PA5_TEMP",
          "ParameterKey": "psp_fld_l2_aeb1_PA5_TEMP",
          "Description": "Master CDF CATDESC: 'Measured temperature of the V5 preamplifier.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "C",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_RBIAS",
          "ParameterKey": "psp_fld_l2_aeb1_V1_RBIAS",
          "Description": "Master CDF CATDESC: 'Index of selected bias resistor for V1 bias current.'. Master CDF VAR_NOTES: 'RBIAS 0 = 49.9 MOhm, RBIAS 1 = 99 kOhm, RBIAS 2 = 2.89 MOhm.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_SHIELD_VOLT",
          "ParameterKey": "psp_fld_l2_aeb1_V1_SHIELD_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V1 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_SHIELD_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb1_V1_SHIELD_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V1 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_SHIELD_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb1_V1_SHIELD_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V1 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_STUB_VOLT",
          "ParameterKey": "psp_fld_l2_aeb1_V1_STUB_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V1 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_STUB_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb1_V1_STUB_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V1 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_STUB_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb1_V1_STUB_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V1 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_WHIP_CURR",
          "ParameterKey": "psp_fld_l2_aeb1_V1_WHIP_CURR",
          "Description": "Master CDF CATDESC: 'Bias current applied to the V1 whip, derived from measured bias voltage.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_WHIP_CURR_DAC",
          "ParameterKey": "psp_fld_l2_aeb1_V1_WHIP_CURR_DAC",
          "Description": "Master CDF CATDESC: 'Bias current applied to the V1 whip, derived from commanded bias voltage.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_WHIP_VOLT",
          "ParameterKey": "psp_fld_l2_aeb1_V1_WHIP_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V1 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_WHIP_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb1_V1_WHIP_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V1 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V1_WHIP_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb1_V1_WHIP_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V1 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_RBIAS",
          "ParameterKey": "psp_fld_l2_aeb1_V2_RBIAS",
          "Description": "Master CDF CATDESC: 'Index of selected bias resistor for V2 bias current.'. Master CDF VAR_NOTES: 'RBIAS 0 = 49.9 MOhm, RBIAS 1 = 99 kOhm, RBIAS 2 = 2.89 MOhm.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_SHIELD_VOLT",
          "ParameterKey": "psp_fld_l2_aeb1_V2_SHIELD_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V2 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_SHIELD_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb1_V2_SHIELD_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V2 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_SHIELD_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb1_V2_SHIELD_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V2 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_STUB_VOLT",
          "ParameterKey": "psp_fld_l2_aeb1_V2_STUB_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V2 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_STUB_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb1_V2_STUB_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V2 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_STUB_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb1_V2_STUB_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V2 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_WHIP_CURR",
          "ParameterKey": "psp_fld_l2_aeb1_V2_WHIP_CURR",
          "Description": "Master CDF CATDESC: 'Bias current applied to the V2 whip, derived from measured bias voltage.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_WHIP_CURR_DAC",
          "ParameterKey": "psp_fld_l2_aeb1_V2_WHIP_CURR_DAC",
          "Description": "Master CDF CATDESC: 'Bias current applied to the V2 whip, derived from commanded bias voltage.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_WHIP_VOLT",
          "ParameterKey": "psp_fld_l2_aeb1_V2_WHIP_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V2 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_WHIP_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb1_V2_WHIP_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V2 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V2_WHIP_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb1_V2_WHIP_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V2 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb1_V5_BOX_VOLT",
          "ParameterKey": "psp_fld_l2_aeb1_V5_BOX_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V5 box.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V5_BOX_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb1_V5_BOX_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V5 box.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V5_BOX_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb1_V5_BOX_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V5 box.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb1_V5_SENSOR_CURR",
          "ParameterKey": "psp_fld_l2_aeb1_V5_SENSOR_CURR",
          "Description": "Master CDF CATDESC: 'Bias current applied to the V5 sensor, derived from measured bias voltage.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V5_SENSOR_CURR_DAC",
          "ParameterKey": "psp_fld_l2_aeb1_V5_SENSOR_CURR_DAC",
          "Description": "Master CDF CATDESC: 'Bias current applied to the V5 sensor, derived from commanded bias voltage.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V5_SENSOR_VOLT",
          "ParameterKey": "psp_fld_l2_aeb1_V5_SENSOR_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V5 sensor.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V5_SENSOR_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb1_V5_SENSOR_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V5 sensor.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_V5_SENSOR_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb1_V5_SENSOR_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V5 sensor.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb1_XFL_CURR",
          "ParameterKey": "psp_fld_l2_aeb1_XFL_CURR",
          "Description": "Master CDF CATDESC: 'Current draw of the floating power supply for the V1 and V2 antennas.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_XFL_TEMP",
          "ParameterKey": "psp_fld_l2_aeb1_XFL_TEMP",
          "Description": "Master CDF CATDESC: 'Measured temperature of the floating power supply for the V1 and V2 antennas.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "C",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_ZFL_CURR",
          "ParameterKey": "psp_fld_l2_aeb1_ZFL_CURR",
          "Description": "Master CDF CATDESC: 'Current draw of the floating power supply for the V5 sensor.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb1_ZFL_TEMP",
          "ParameterKey": "psp_fld_l2_aeb1_ZFL_TEMP",
          "Description": "Master CDF CATDESC: 'Measured temperature of the floating power supply for the V5 sensor.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb1.'",
          "Units": "C",
          "FillValue": -1e+31
        },
        {
          "Name": "epoch_aeb2",
          "ParameterKey": "epoch_aeb2",
          "Description": "CATDESC: 'Time in TT2000 for AEB2 data'. Notes not in Master CDF: 'The units are the units in CDF files. For other web services, this variable is may be represented as a time string.'",
          "Units": "ns",
          "Support": {
            "Qualifier": "Scalar",
            "SupportQuantity": "Temporal"
          }
        },
        {
          "Name": "psp_fld_l2_aeb2_TELEM_FLAG",
          "ParameterKey": "psp_fld_l2_aeb2_TELEM_FLAG",
          "Description": "Master CDF CATDESC: 'Flag indicating source of AEB2 data.'. Master CDF VAR_NOTES: 'This flag indicates whether data is derived directly from AEB telemetry. During normal operations, AEB housekeeping data are returned in telemetry packets. Packets are generated for each update to AEB settings, and periodically for monitoring purposes. Data corresponding to these packets have a flag value of 1. During bias sweeps, settings are updated too rapidly for each change to be telemetered in an individual packet, so the bias settings during the sweep areinferred based on FIELDS instrument command history. Data corresponding to these inferred measurements have a flag value of 0. Data with a flag value of 0 contains only commanded voltages and currents (no measured voltages, currents, or temperatures).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb2_AEB2_TEMP",
          "ParameterKey": "psp_fld_l2_aeb2_AEB2_TEMP",
          "Description": "Master CDF CATDESC: 'Measured temperature of the AEB2 circuit board.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "C",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_PA3_TEMP",
          "ParameterKey": "psp_fld_l2_aeb2_PA3_TEMP",
          "Description": "Master CDF CATDESC: 'Measured temperature of the V3 preamplifier.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "C",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_PA4_TEMP",
          "ParameterKey": "psp_fld_l2_aeb2_PA4_TEMP",
          "Description": "Master CDF CATDESC: 'Measured temperature of the V4 preamplifier.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "C",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_RBIAS",
          "ParameterKey": "psp_fld_l2_aeb2_V3_RBIAS",
          "Description": "Master CDF CATDESC: 'Index of selected bias resistor for V3 bias current.'. Master CDF VAR_NOTES: 'RBIAS 0 = 49.9 MOhm, RBIAS 1 = 99 kOhm, RBIAS 2 = 2.89 MOhm.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_SHIELD_VOLT",
          "ParameterKey": "psp_fld_l2_aeb2_V3_SHIELD_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V3 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_SHIELD_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb2_V3_SHIELD_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V3 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_SHIELD_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb2_V3_SHIELD_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V3 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_STUB_VOLT",
          "ParameterKey": "psp_fld_l2_aeb2_V3_STUB_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V3 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_STUB_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb2_V3_STUB_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V3 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_STUB_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb2_V3_STUB_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V3 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_WHIP_CURR",
          "ParameterKey": "psp_fld_l2_aeb2_V3_WHIP_CURR",
          "Description": "Master CDF CATDESC: 'Bias current applied to the V3 whip, derived from measured bias voltage.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_WHIP_CURR_DAC",
          "ParameterKey": "psp_fld_l2_aeb2_V3_WHIP_CURR_DAC",
          "Description": "Master CDF CATDESC: 'Bias current applied to the V3 whip, derived from commanded bias voltage.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_WHIP_VOLT",
          "ParameterKey": "psp_fld_l2_aeb2_V3_WHIP_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V3 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_WHIP_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb2_V3_WHIP_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V3 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V3_WHIP_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb2_V3_WHIP_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V3 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_RBIAS",
          "ParameterKey": "psp_fld_l2_aeb2_V4_RBIAS",
          "Description": "Master CDF CATDESC: 'Index of selected bias resistor for V4 bias current.'. Master CDF VAR_NOTES: 'RBIAS 0 = 49.9 MOhm, RBIAS 1 = 99 kOhm, RBIAS 2 = 2.89 MOhm.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_SHIELD_VOLT",
          "ParameterKey": "psp_fld_l2_aeb2_V4_SHIELD_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V4 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_SHIELD_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb2_V4_SHIELD_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V4 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_SHIELD_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb2_V4_SHIELD_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V4 shield.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_STUB_VOLT",
          "ParameterKey": "psp_fld_l2_aeb2_V4_STUB_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V4 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_STUB_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb2_V4_STUB_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V4 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_STUB_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb2_V4_STUB_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V4 stub.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_WHIP_CURR",
          "ParameterKey": "psp_fld_l2_aeb2_V4_WHIP_CURR",
          "Description": "Master CDF CATDESC: 'Bias current applied to the V4 whip, derived from measured bias voltage.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_WHIP_CURR_DAC",
          "ParameterKey": "psp_fld_l2_aeb2_V4_WHIP_CURR_DAC",
          "Description": "Master CDF CATDESC: 'Bias current applied to the V4 whip, derived from commanded bias voltage.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_WHIP_VOLT",
          "ParameterKey": "psp_fld_l2_aeb2_V4_WHIP_VOLT",
          "Description": "Master CDF CATDESC: 'Measured bias voltage applied to the V4 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_WHIP_VOLT_DAC",
          "ParameterKey": "psp_fld_l2_aeb2_V4_WHIP_VOLT_DAC",
          "Description": "Master CDF CATDESC: 'Commanded bias voltage applied to the V4 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "V",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_V4_WHIP_VOLT_DAC_counts",
          "ParameterKey": "psp_fld_l2_aeb2_V4_WHIP_VOLT_DAC_counts",
          "Description": "Master CDF CATDESC: 'Commanded raw bias voltage (in DAC counts) applied to the V4 whip.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "None",
          "FillValue": -32768
        },
        {
          "Name": "psp_fld_l2_aeb2_XFL_CURR",
          "ParameterKey": "psp_fld_l2_aeb2_XFL_CURR",
          "Description": "Master CDF CATDESC: 'Current draw of the floating power supply for the V3 and V4 antennas.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "uA",
          "FillValue": -1e+31
        },
        {
          "Name": "psp_fld_l2_aeb2_XFL_TEMP",
          "ParameterKey": "psp_fld_l2_aeb2_XFL_TEMP",
          "Description": "Master CDF CATDESC: 'Measured temperature of the floating power supply for the V3 and V4 antennas.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_aeb2.'",
          "Units": "C",
          "FillValue": -1e+31
        },
        {
          "Name": "epoch_quality_flags",
          "ParameterKey": "epoch_quality_flags",
          "Description": "CATDESC: 'Time for the FIELDS quality flag'. Notes not in Master CDF: 'The units are the units in CDF files. For other web services, this variable is may be represented as a time string.'",
          "Units": "ns",
          "Support": {
            "Qualifier": "Scalar",
            "SupportQuantity": "Temporal"
          }
        },
        {
          "Name": "quality_flags",
          "ParameterKey": "psp_fld_l2_quality_flags",
          "Description": "Master CDF CATDESC: 'FIELDS quality flag'. Master CDF VAR_NOTES: 'FIELDS quality flags. This is a bitwise variable, meaning that multiple flags can be set for a single time, by adding flag values. Current flagged values are: 1: FIELDS antenna bias sweep, 2: PSP thruster firing, 4: SCM Calibration, 8: PSP rotations for MAG calibration (MAG rolls), 16: FIELDS MAG calibration sequence, 32: SWEAP SPC in electron mode, 64: PSP Solar limb sensor (SLS) test. 128: PSP spacecraft is off umbra pointing. 256: High frequency noise affecting RFS and TDS receivers. 512: Antennas driven towards the FIELDS power supply rails. 1024: Anomalous bias current on one or more FIELDS antennas. A value of zero corresponds to no set flags. Not all flags are relevant to all FIELDS data products, refer to notes in the CDF metadata and on the FIELDS SOC website for information on how the various flags impact FIELDS data. For more information on the quality flags describing high frequency noise and antennas driven to the rails, see release notes for PSP/FIELDS releases 8 and 9. For more information on the quality flags describing  anomalous bias current, see release notes for PSP/FIELDS release 12. Additional flagged items may be added in the future.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is epoch_quality_flags.'",
          "Units": "None",
          "FillValue": 4294967295
        }
      ]
    }
  }
}