<_Note>Nodes prefixed with a _ are not valid SPASE, but are included for debugging. Values prefixed with a x_ are not valid SPASE but may considered for addition for completeness. 2.6.1 <_MasterURL>https://cdaweb.gsfc.nasa.gov/pub/software/cdawlib/0JSONS/sta_l1_impact_hkp_00000000_v01.json (from all.xml) spase://NASA/NumericalData/STEREO-A/IMPACT/Housekeeping/L1/PT2S <_ResourceID>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ResourceID.json STEREO Ahead IMPACT State of Health <_ResourceName>Source: Master/CDFglobalAttributes/Logical_source_description stereoa_l1_impact <_AlternateName>Source: Master/CDFglobalAttributes/Logical_source The file contains state of health data from the IMPACT instrument on the STEREO Ahead spacecraft. <_Description>Source: Master/CDFglobalAttributes/TEXT <_Rights> SPDX Creative Commons Zero v1.0 Universal https://spdx.org/licenses/CC0-1.0.html https://spdx.org/licenses/ http://sprg.ssl.berkeley.edu/impact STEREO/IMPACT PI Site Experiment and Data descriptions for STEREO/IMPACT <_Note>URL also in all.xml. Using master. STEREO IMPACT Experiment Web Site http://sprg.ssl.berkeley.edu/impact/ STEREO, In-situ Measurements of Particles and CME Transients, IMPACT, Experiment and Data Descriptions <_Note>Source: InformationURL.json https://doi.org/10.48322/ze43-sh27 <_DOI>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/DOI.json <_AccessInformation>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/AccessInformation.json 2006-10-28T14:44:27Z 2026-03-31T23:59:08Z <_TemporalDescription>Generated from all.xml/@timerange_start and all.xml/@timerange_stop PT2S <_Cadence>Counts based on variable 'Epoch' in https://cdaweb.gsfc.nasa.gov/sp_phys/data/stereo/ahead/l1/impact/hkp/2006/sta_l1_impact_hkp_20061028_v02.cdf. The most common cadence, 2000 [ms] = PT2S, occurred for 99.1749% of the 16347 timesteps. <_ObservedRegion>Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ObservedRegion.json <_ProcessingLevel>Processing level is not available in the master file; it should be there instead of, say, https://github.com/rweigel/cdawmeta-spase/blob/main/ProcessingLevel.json spase://SMWG/Repository/NASA/GSFC/SPDF Online Open SPDF/CDAWeb. Please also acknowledge the data producer: Christina Lee at UCB/SSL HTTPS from SPDF https://cdaweb.gsfc.nasa.gov/pub/data/stereo/ahead/l1/impact/hkp In CDF via HTTP from CDAWeb sta_l1_impact_hkp_%Y%m%d_%Q.cdf %Y STA_L1_IMPACT_HKP CDF spase://SMWG/Repository/NASA/GSFC/SPDF Online Open SPDF/CDAWeb. Please also acknowledge the data producer: Christina Lee at UCB/SSL FTPS from SPDF ftps://cdaweb.gsfc.nasa.gov/pub/data/stereo/ahead/l1/impact/hkp In CDF via HTTP from CDAWeb sta_l1_impact_hkp_%Y%m%d_%Q.cdf %Y STA_L1_IMPACT_HKP CDF spase://SMWG/Repository/NASA/GSFC/SPDF Online Open SPDF/CDAWeb. Please also acknowledge the data producer: Christina Lee at UCB/SSL CDAWeb Web Service https://cdaweb.gsfc.nasa.gov/WebServices/ Instructions for using web services to access this dataset an other other metadata and options for CDAWeb datasets. The ProductKey here corresponds to the query parameter 'dataset' in the tables at the AccessURL in a dataset-related request can be made. STA_L1_IMPACT_HKP CDF CSV GIF NetCDF PNG PS PDF XML x_Script.IDL x_Script.Python Text.ASCII x_WAV spase://SMWG/Repository/NASA/GSFC/SPDF Online Open SPDF/CDAWeb. Please also acknowledge the data producer: Christina Lee at UCB/SSL CDAWeb Web Service user interface https://cdaweb.gsfc.nasa.gov/cgi-bin/eval2.cgi?index=sp_phys&dataset=STA_L1_IMPACT_HKP STA_L1_IMPACT_HKP Web service user interface for this product. CDF GIF PDF Text.ASCII x_WAV spase://SMWG/Repository/NASA/GSFC/SPDF Online Open SPDF/CDAWeb. Please also acknowledge the data producer: Christina Lee at UCB/SSL CDAWeb Python Script https://cdaweb.gsfc.nasa.gov/WS/cdasr/1/dataviews/sp_phys/datasets/STA_L1_IMPACT_HKP/clientLibraryExample/ STA_L1_IMPACT_HKP Web service that generates a Python script to access this product. x_Script.IDL x_Script.Python spase://SMWG/Repository/NASA/GSFC/SPDF Online Open SPDF/SSCWeb. Please also acknowledge the data producer: Christina Lee at UCB/SSL 4D Orbit Viewer https://sscweb.gsfc.nasa.gov/4dorbit/?sc=STA_L1_IMPACT_HKP STA_L1_IMPACT_HKP Web Service to this product. HTML spase://SMWG/Repository/NASA/GSFC/SPDF Online Open SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Christina Lee at UCB/SSL CDAWeb HAPI Server https://hapi-server.org/servers/#server=CDAWeb&dataset=STA_L1_IMPACT_HKP STA_L1_IMPACT_HKP Web Service to this product using the HAPI interface. CSV JSON Binary spase://SMWG/Repository/NASA/GSFC/SPDF Online Open SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Christina Lee at UCB/SSL CDAWeb HAPI Script in Multiple Languages https://hapi-server.org/servers/#server=CDAWeb&dataset=STA_L1_IMPACT_HKP&return=script STA_L1_IMPACT_HKP Web Service user interface that generates scripts in IDL, Javascript, MATLAB, Python, Autoplot, curl, wget to access this product. See https://hapi-server.org/servers/api for the API. x_Script.IDL x_Script.Javascript x_Script.MATLAB x_Script.Python x_Script.Autoplot x_Script.curl x_Script.wget spase://SMWG/Repository/NASA/GSFC/SPDF Online Open SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Christina Lee at UCB/SSL HAPI visualizations https://hapi-server.org/plot/?server=https://cdaweb.gsfc.nasa.gov/hapi&dataset=STA_L1_IMPACT_HKP&format=gallery STA_L1_IMPACT_HKP Web Service that generates plots. See https://hapi-server.org/plot/ for the API. PNG PDF SVG Solar Terrestrial Relations Observatory Ahead of the Sun-Earth Line (from all.xml/observatory/description/@short) In-situ Measurements of Particles and CME Transients (from all.xml/instrument/description/@short) Solar Physics (from Master/CDFglobalAttributes/Discipline) Heliospheric Physics (from Master/CDFglobalAttributes/Discipline) STEREOA (from Master/CDFglobalAttributes/Source_name) Solar Terrestrial Relations Observatory Ahead of the Sun-Earth Line (from Master/CDFglobalAttributes/Source_name) L1 (from Master/CDFglobalAttributes/Data_type) Level 1 (from Master/CDFglobalAttributes/Data_type) IMPACT (from all.xml/instrument/@ID) Heliosphere.Remote1AU spase://SMWG/Instrument/STEREO-A/IMPACT spase://SMWG/Instrument/STEREO-A/PLASTIC EnergeticParticles InstrumentStatus MagneticField ThermalPlasma Epoch Epoch CATDESC: 'Time since 0 AD'. Notes not in Master CDF: 'The units are the units in CDF files. For other web services, this variable is may be represented as a time string.' ms Scalar Temporal Software Version SoftwareVersion Master CDF CATDESC: 'IDPU Software version'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Hardware Version HardwareVersion Master CDF CATDESC: 'IDPU Hardware version'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Poll Time Max PollTimeMax Master CDF CATDESC: 'Maximum foreground loop time'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' s -1e+31 Poll Time Average PollTimeAvg Master CDF CATDESC: 'Average foreground loop time'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' s -1e+31 Time Jitter TimeJitter Master CDF CATDESC: 'Max UTC time jitter compared to Sample Clock once a second'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' s -1e+31 Error Code ErrorCode Master CDF CATDESC: 'Error code reported by IDPU'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Error Data ErrorData Master CDF CATDESC: 'Error data reported by IDPU'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Error Count ErrorCount Master CDF CATDESC: 'Error count'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Command Count CommandCount Master CDF CATDESC: 'IMPACT Command Counter'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535 Command Last ID CommandLastID Master CDF CATDESC: 'IMPACT Last Command Ap ID (Bits 8,6,5,4,3,2,1,0)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Command Last Sequence CommandLastSeq Master CDF CATDESC: 'IMPACT Last Command Sequence Counter (LSB)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 PLASTIC Command Count PCommandCount Master CDF CATDESC: 'PLASTIC command counter'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535 PLASTIC Command Last ID PCommandLastID Master CDF CATDESC: 'PLASTIC Last Command Ap ID (Bits 8,6,5,4,3,2,1,0)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 PLASTIC Command Last Sequence PCommandLastSeq Master CDF CATDESC: 'PLASTIC Last Command Sequence Counter (LSB)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 IMPACT SSR IMPACT_SSR Master CDF CATDESC: 'IMPACT SSR Fill Level'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' % 255 PLASTIC SSR PLASTIC_SSR Master CDF CATDESC: 'PLASTIC SSR Fill Level'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' % 255 SC Status SCStatus Master CDF CATDESC: 'Spacecraft status'. Master CDF VAR_NOTES: 'Bit 0 IDPU Power Warning, (1=Warning, RED; 0=OK) Bit 1 SEP Power Warning, (1=Warning, YELLOW; 0=OK) Bit 2 SWEA Power Warning, (1=warning, YELLOW; 0=OK) Bit 3 PLASTIC Power Warning, (1=warning, YELLOW; 0=OK) Bit 4 Thruster Warning, (1=warning, YELLOW; 0=OK) Bit 5 Coarse Pointing, (1=Bad Pointing, YELLOW; 0=OK) Bit 6 SWAVES Power Warning (1=warning, YELLOW; 0=OK) Bit 7 1553 Channel spacecraft status was received on, 1=A, 0=B'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Boot Select BootSelect Master CDF CATDESC: 'Boot Select (0-3=EEPROM to RAM, 4-7=EEPROM, else PROM)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Code Page CodePage Master CDF CATDESC: 'Code Page (0=PROM, 8-11=EEPROM0-3, 16=RAM, Else = Illegal)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Code Page Status CodePageStatus Master CDF CATDESC: 'Code Page Status Bits'. Master CDF VAR_NOTES: 'Bit 7 EEPROM Code Page 3 checksum status (1=bad, RED; 0=OK) Bit 6 EEPROM Code Page 2 checksum status (1=bad, RED; 0=OK) Bit 5 EEPROM Code Page 1 checksum status (1=bad, RED; 0=OK) Bit 4 EEPROM Code Page 0 checksum status (1=bad, RED; 0=OK) Bit 3 RAM Code Page checksum status (1=bad, RED; 0=OK) Bits 2:0 RAM Code Page Source: 0-3 = copies of EEPROM Code Pages, 7=PROM, 6=modified'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Command Sequence Running CmdSeqRunning Master CDF CATDESC: 'Command Sequence # Running (>31 -> no sequence running)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Interface Enables InterfaceEnables Master CDF CATDESC: 'Instrument Interface Enables'. Master CDF VAR_NOTES: 'Bit 0 MAGInterface - MAG Instrument Interface Enable (1=enabled; 0=disabled, YELLOW) Bit 1 STEUInterface - STE-U Instrument Interface Enable (1=enabled; 0=disabled, YELLOW) Bit 2 SWEAInterface - SWEA/STE-D Instrument Interface Enable (1=enabled; 0=disabled, YELLOW) Bit 3 SEPInterface - SEP Instrument Interface Enable (1=enabled; 0=disabled, YELLOW) Bit 4 PLASTICInterface - PLASTIC Instrument Interface Enable (1=enabled; 0=disabled, YELLOW) Bit 5 spare Bit 6 EEPROMWriteEnable - IDPU EEPROM Write Enable (1=enabled=YELLOW; 0=disabled) Bit 7 PLASTICSysCmd - PLASTIC System Commands Enable (1=enabled, YELLOW; 0=disabled)'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 IMPACT Telemetry Enables ITelemEnables Master CDF CATDESC: 'IMPACT Telemetry Enables'. Master CDF VAR_NOTES: 'Bit 0 BurstTlm - Enable Burst Telemetry to be sent (for all ITelemEnables except where otherwise stated, 0=disabled, YELLOW; 1=enabled) Bit 1 SEPTlm - Enable SEP Telemetry Bit 2 MAGTlm - Enable MAG Telemetry Bit 3 MAGBurst - Enable MAG Burst Collection Bit 4 STERatesTlm - Enable STE Monitor Rates Telemetry Bit 5 STERatesBurst - Enable STE Monitor Rates Burst Collection Bit 6 STESpecTlm - Enable STE Spectra Telemetry Bit 7 STESpecBurst - Enable STE Spectra Burst Collection Bit 8 SWEADistTlm - Enable SWEA Distribution Telemetry Bit 9 SWEADistBurst - Enable SWEA Distribution Burst Collection Bit 10 SWEAPADTlm - Enable SWEA PAD Telemetry Bit 11 SWEAMomTlm - Enable SWEA Moments Telemetry Bit 12 SWEAFHKP - Enable SWEA Fast Housekeeping (no alarm state, 0 or 1 = green) Bit 13 SWEASpecTlm - Enable SWEA Spectra Telemetry Bit 14 BurstCriteria - Enable Burst Criteria Telemetry Bit 15 SWEAMomComp - Enable SWEA Moment computation'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535 PLASTIC Telemetry Enables PTelemEnables Master CDF CATDESC: 'PLASTIC Telemetry Enables'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535 Interfaces Active InterfaceActive Master CDF CATDESC: 'Instrument Interfaces Active'. Master CDF VAR_NOTES: 'Bit 0 MAGInterface - MAG Instrument Interface Active (1=active; 0=inactive, YELLOW) Bit 1 STEUInterface - STE-U Instrument Interface Active (1=active; 0=inactive, YELLOW) Bit 2 SWEAInterface - SWEA/STE-D Instrument Interface Active (1=active; 0=inactive, YELLOW) Bit 3 SEPInterface - SEP Instrument Interface Active (1=active; 0=inactive, YELLOW) Bit 4 PLASTICInterface - PLASTIC Instrument Interface Active (1=active; 0=inactive, YELLOW) Bit 5 SWAVESInterface - SWAVES RT-RT Instrument Interface Active (1=active, 0=inactive, YELLOW) Bit 6 SWAVESTimeout - SWAVES RT-RT Rx Timeout; SWAVES not responding. (1=Timeout=YELLOW, 0=OK) Bit 7 SEPTimeout - SEP Interface activity low for too long (1=Timeout=Yellow, 0=OK)'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Max IMPACT Queue MaxIMPACTQ Master CDF CATDESC: 'Maximum IMPACT queue depth'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Max PLASTIC Queue MaxPLASTICQ Master CDF CATDESC: 'Maximum PLASTIC queue depth'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 IMPACT Bitrate IMPACTBitrate Master CDF CATDESC: 'IMPACT Telemetry bit rate (1 minute average)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' bps -1e+31 PLASTIC Bitrate PLASTICBitrate Master CDF CATDESC: 'PLASTIC Telemetry bit rate (1 minute average)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' bps -1e+31 Command Sequence Mask CmdSeqMask Master CDF CATDESC: 'Command sequence mask'. Master CDF VAR_NOTES: 'Bit 31 Seq0 IDPUPwrWarn - IDPU Power Warning Sequence Enable Bit 30 Seq1 IDPUPwrWarnClr - IDPU Power Warning Clear Sequence Enable Bit 29 Seq2 SEPPwrWarn - SEP Power Warning Sequence Enable Bit 28 Seq3 SEPPwrWarnClr - SEP Power Warning Clear Sequence Enable Bit 27 Seq4 SWEAPwrWarn - SWEA Power Warning Sequence Enable Bit 26 Seq5 SWEAPwrWarnClr - SWEA Power Warning Clear Sequence Enable Bit 25 Seq6 PLAPwrWarn - PLASTIC Power Warning Sequence Enable Bit 24 Seq7 PLAPwrWarnClr - PLASTIC Power Warning Clear Sequence Enable Bit 23 Seq8 ThrusterWarn - Thruster Warning Sequence Enable Bit 22 Seq9 ThrusterWarnClr - Thruster Warning Clear Sequence Enable Bit 21 Seq10 PointWarn - Coarse Pointing Warning Sequence Enable Bit 20 Seq11 PointWarnClr - Coarse Pointing Warning Clear Sequence Enable Bit 19 Seq12 SEPRecovery - SEP Recovery Sequence Enable Bit 18 Seq13 - Command Sequence 13 Enable Bit 17 Seq14 - Command Sequence 14 Enable Bit 16 Seq15 - Command Sequence 15 Enable Bit 15 Seq16 - Command Sequence 16 Enable Bit 14 Seq17 - Command Sequence 17 Enable Bit 13 Seq18 - Command Sequence 18 Enable Bit 12 Seq19 - Command Sequence 19 Enable Bit 11 Seq20: PLA_PS0 - PLASTIC PS 0 (Disable Entrance system; "Thruster/Coarse") - Sequence Enable Bit 10 Seq21: PLA_Start - PLASTIC Startup Sequence Enable Bit 9 Seq22: PLA_PS1 - PLASTIC PS 1 (Reduce HV levels) Sequence Enable Bit 8 Seq23: PLA_PR0 - PLASTIC PR0 - (second half, recover from a "PAC DISCHARGE") Sequence Enable Bit 7 Seq24: PLA_PS2 - PLASTIC PS2 (Disable entrance system, turn off HV, don't request turnoff "PAC Discharge") Sequence Enable Bit 6 Seq25 - Command Sequence 25 Enable Bit 5 Seq26: PLA_PR0 - PLASTIC PR0 (part 1 - enbale entrance system, bring up HVs and put system in mode 3; after PS2) Sequence Enable Bit 4 Seq27: PLA_PR1 - PLASTIC PR1 (enable entrance system, Run if Thruster Coarse bits clear) Sequence Enable Bit 3 Seq28 - Command Sequence 28 Enable Bit 2 Seq29: PLA_PS3 - PLASTIC PS3 (disable Entrance system, turn off HV and requenst PLASTIC OFF; "IDPU/PLASTIC pwr down") Sequence Enable Bit 1 Seq30: UserPeriodic - User Periodic Sequence Enable Bit 0 Seq31: SystemPeriodic - System Periodic Sequence Enable'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 4294967295 Burst Mode ID BurstModeID Master CDF CATDESC: 'Burst Parameter Table Mode ID'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Burst Current Criteria BurstCurCriteria Master CDF CATDESC: 'Burst Current Criteria'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 STEU Door Count STEUDoorCount Master CDF CATDESC: 'STE-U Door motion count'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 STEU Door Start STEUDoorStart Master CDF CATDESC: 'STE-U Time from power application to motion start'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' s -1e+31 STEU Door Done STEUDoorDone Master CDF CATDESC: 'STE-U Time from power application to motion complete'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' s -1e+31 STED Door Count STEDDoorCount Master CDF CATDESC: 'STE-D Door motion count'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 STED Door Start STEDDoorStart Master CDF CATDESC: 'STEDDoorStart'. Master CDF VAR_NOTES: 'STE-D Time from power application to motion start'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' s -1e+31 STED Door Done STEDDoorDone Master CDF CATDESC: 'STE-D Time from power application to motion complete'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' s -1e+31 Auto LUT AutoLUT Master CDF CATDESC: 'SWEA/STE Auto LUT enables'. Master CDF VAR_NOTES: 'Bit 0 ISWEAAutoLUT - Enable SWEA Auto LUT Generation (1=manual) Bit 1 ISTEAutoLUT - Enable STE Auto LUT Generation (1=manual) Bit 2 ISWEAAutoV0 - Enable automatic generation of SWEA V0 setting (1=manual) Bit 3 ISWEAMomE - Enable automatic generation of SWEA Moment energy coef (1=manual) Bit 4 spare Bit 5 ISTEULUT - Current state of the STE-U LUT page select Bit 6 ISTEDLUT - Current state of the STE-D LUT page select Bit 7 ISWEALUT - Current state of the SWEA LUT page select'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 STE Mode ID STEModeID Master CDF CATDESC: 'STE LUT Table ID'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 SWEA Mode ID SWEAModeID Master CDF CATDESC: 'SWEA LUT Table ID'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Burst Save Page BurstSavePage Master CDF CATDESC: 'Burst recording page number'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Burst Send Page BurstSendPage Master CDF CATDESC: 'Burst transmission page number'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Burst Best Criteria BurstBestCriteria Master CDF CATDESC: 'Burst Save Best Criteria'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 MAG HKP MAGHKP Master CDF CATDESC: 'MAG Hardware Housekeeping'. Master CDF VAR_NOTES: 'Bits 0:3 Mag Error counter (not 0 = RED, else OK) Bits 4:7 Mag Command counter Bit 8 spare, =1 (0=Red; 1=OK) Bit 9 First (1st MAG sample after 1Hz tic) Bit 10 Time (toggles at 1Hz) Bit 11 Interface Parity Error (1=RED; 0=OK) Bit 12 Interface Timeout error (1=RED; 0=OK) Bit 13 ADC Cal (0=off, 1=on) Bit 14 In Flight Cal (0=off, 1=on) Bit 15 Range (0=low fields, high sensitivity, 1=high fields, low sensitivity)'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535 MAG Heater Current MAGHeater Master CDF CATDESC: 'MAG sensor heater input current (on 28V primary)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 MAG Temp MAGTemp Master CDF CATDESC: 'MAG sensor temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 STEU Current STEUCur Master CDF CATDESC: 'STE-U Front End Current (sum of +5A, -5A, and +5D)'. Master CDF VAR_NOTES: 'To convert to current (sum of +5.1V current and -5.1V current, mA) use: ISTEUCur-corrected = STEUa*V + STEUb*ISTEU12V) - STEUc*(ISTEUVCC1-ISTEU5VD) STEUa 40.20 STEUb 16.14 STEUc 201.00 '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 STEU Temp STEUTemp Master CDF CATDESC: 'STEUTemp'. Master CDF VAR_NOTES: 'STE-U temperature'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 STEU DAC Temp STEUDACTemp Master CDF CATDESC: 'STE-U Interface PWB Temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 STEU VCCA STEUVCCA Master CDF CATDESC: 'STE-U +2.5V Supply Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 STEU 5VD STEU5VD Master CDF CATDESC: 'STE-U +5V Digital Supply Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 STEU VCC1 STEUVCC1 Master CDF CATDESC: 'STE-U FPGA Interface +5V Supply voltage (ref)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 STEU 5VA STEU5VA Master CDF CATDESC: 'STE-U +5V Analog Supply Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 STEU 12V STEU12V Master CDF CATDESC: 'STE-U +12V Supply Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA MCP SWEAMCP Master CDF CATDESC: 'SWEA MCP Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA NR5V SWEANR5V Master CDF CATDESC: 'SWEA Non-regulated HV Voltage 5V supply'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA Anal SWEAAnal Master CDF CATDESC: 'SWEA Analyzer Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA Defl1 SWEADefl1 Master CDF CATDESC: 'SWEA Deflector 1 Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA Defl2 SWEADefl2 Master CDF CATDESC: 'SWEA Deflector 2 Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEAV0 SWEAV0 Master CDF CATDESC: 'SWEA V0 Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA GND SWEAGND Master CDF CATDESC: 'SWEA Ground'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA/STED Cur SWEASTEDCur Master CDF CATDESC: 'SWEA/STE-D Front End Current (sum of +5A, -5A, and +5D). '. Master CDF VAR_NOTES: 'To convert to current (sum of +5.1V current and -5.1V current, mA) use: ISWEASTEDCur-corrected = STEDa*V + STEDb*ISWEASTE12V) - STEDc*(ISWEASTEDVCC1 - ISWEASTED5VD) STEDa 40.20 STEDb 16.14 STEDc 201.00'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA MCP Temp SWEAMCPTemp Master CDF CATDESC: 'SWEA MCP Temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 STED Temp STEDTemp Master CDF CATDESC: 'STE-D temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 SWEA DAC Temp SWEADACTemp Master CDF CATDESC: 'SWEA PWB Temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 SWEA/STED VCCA SWEASTEDVCCA Master CDF CATDESC: 'SWEA/STE-D +2.5V Supply Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA/STED 5VD SWEASTED5VD Master CDF CATDESC: 'SWEA/STE-D +5V Digital Supply Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA/STED VCC1 SWEASTEDVCC1 Master CDF CATDESC: 'SWEA/STE FPGA Interface +5V Supply voltage (ref)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA/STE 5VA SWEASTE5VA Master CDF CATDESC: 'SWEA/STE-D +5V Analog Supply Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 SWEA/STE 12V SWEASTE12V Master CDF CATDESC: 'SWEA/STE-D +12V Supply Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 STEU Digital STEUDig Master CDF CATDESC: 'STE-U digital housekeeping'. Master CDF VAR_NOTES: 'Bit 0 CPE - Command Interface Parity Error (1=Error, RED; 0=OK) Bit 1 AFEPWR - AFE Power status (1=on; 0=OFF=YELLOW) Bit 2 AFESHDN - AFE Over-current detect (1=overcurrent=RED; 0=OK) Bit 3 spare Bits 5:4 STECOVSTAT - STE Cover Status:(00=illegal, RED; 01=Closed; 10=Open; 11=Moving, YELLOW) Bits 7:6 STECOVSW - STE Cover Actuator Power (00=OFF; 01=Open; 10=Close; 11=Illegal, RED) Bit 8 ANORM - Indicates an anusual configuration, (0=Normal; 1=Unusual, YELLOW) Bit 9 spare Bit 10 spare Bit 11 HSKPMD - Analog Housekeeping mode (0=cycling, 1=sweep) Bit 12 ENBSTETP - Enable STE Test Pulser (1=enabled, YELLOW; 0=disabled) Bit 13 spare Bit 14 ENBSWEA - Enable SWEA Subsystem (1=enabled, RED; 0=disabled) Bit 15 PCE - Protected Command Error (1=error, RED; 0=OK)'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535 SWEA/STED Digital SWEASTEDDig Master CDF CATDESC: 'SWEA/STE-D digital housekeeping'. Master CDF VAR_NOTES: 'Bit 0 CPE - Command Interface Parity Error (1=Error, RED; 0=OK) Bit 1 AFEPWR - AFE Power status (1=on; 0=OFF=YELLOW) Bit 2 AFESHDN - AFE Over-current detect (1=overcurrent=RED; 0=OK) Bit 3 SWEACOVSTAT - SWEA cover status, (1=closed, YELLOW; 0=open) Bits 5:4 STECOVSTAT - STE Cover Status:(00=illegal, RED; 01=Closed; 10=Open; 11=Moving, YELLOW) Bits 7:6 STECOVSW - STE Cover Actuator Power (00=OFF; 01=Open; 10=Close; 11=Illegal, RED) Bit 8 ANORM - Indicates an anusual configuration, (0=Normal; 1=Unusual, YELLOW) Bit 9 MCPHVENB - MCP HV Enable (0=disabled, 1=enabled) Bit 10 NRHVENB - Non-regulated HV Enable (0=disabled, 1=enabled) Bit 11 HSKPMD - Analog Housekeeping mode (0=cycling; 1=sweep) Bit 12 ENBSTETP - Enable STE Test Pulser (1=enabled, YELLOW; 0=disabled) Bit 13 ENBSWEATP - Enable SWEA Test Pulser (1=enabled, YELLOW; 0=disabled) Bit 14 ENBSWEA - Enable SWEA Subsystem (1=enabled; 0=disabled, RED) Bit 15 PCE - Protected Command Error (1=error, RED; 0=OK)'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535 Block ID BLK_ID Master CDF CATDESC: 'PLASTIC Block ID'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 Device ID DEV_ID Master CDF CATDESC: 'PLASTIC Device ID'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 PLASTIC NMSPARE PLRNM_SPARE Master CDF CATDESC: 'PLASTIC spare monitor channel (negative)'. Master CDF VAR_NOTES: 'normally grounded'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' -1e+31 PLASTIC LVCN12V PLVC_N12V Master CDF CATDESC: 'PLASTIC low voltage converter -12 V'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PLASTIC LVCN5V PLVC_N5V Master CDF CATDESC: 'PLASTIC low voltage converter -5 V'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PLASTIC ESA_VM_POS PESA_VM_POS Master CDF CATDESC: 'PLASTIC Electrostatic Analyzer Positive Voltage Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PDFL_1_VM PDFL_1_VM Master CDF CATDESC: 'PLASTIC Deflection 1 HV Voltage Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PDFL_1_TAP PDFL_1_TAP Master CDF CATDESC: 'Deflection 1 HV Tap Voltage Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PDFL_2_VM PDFL_2_VM Master CDF CATDESC: 'PLASTIC Deflection 2 HV Voltage Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PDFL_2_TAP PDFL_2_TAP Master CDF CATDESC: 'PLASTIC Deflection 2 HV Tap Voltage Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PLVC_P2VB PLVC_P2VB Master CDF CATDESC: 'PLASTIC low voltage converter +2.5 V b'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PPAC_CM_DC PPAC_CM_DC Master CDF CATDESC: 'PLASTIC Post-Acceleration Voltage DC Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PLVC_P12V PLVC_P12V Master CDF CATDESC: 'PLASTIC low voltage converter +12 V'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PLRPM_SPARE PLRPM_SPARE Master CDF CATDESC: 'PLASTIC spare monitor channel (positive)'. Master CDF VAR_NOTES: 'normally grounded'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' -1e+31 PLVC_P2VA PLVC_P2VA Master CDF CATDESC: 'PLASTIC low voltage converter +2.5 V a'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PLVC_P5V PLVC_P5V Master CDF CATDESC: 'PLASTIC low voltage converter +5 V'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PADC_AVDD PADC_AVDD Master CDF CATDESC: 'PLASTIC Analog to Digital Converter Voltage (Analog)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PADC_DVDD PADC_DVDD Master CDF CATDESC: 'PLASTIC Analog to Digital Converter Voltage (Digital)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PPAC_VM PPAC_VM Master CDF CATDESC: 'PLASTIC Post-Acceleration Voltage Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PCAL_VREF PCAL_VREF Master CDF CATDESC: 'PLASTIC Calibrated Reference Voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PPAC_CM_AC PPAC_CM_AC Master CDF CATDESC: 'PLASTIC Post-Acceleration AC Current Monitor -- not in use'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535 PMCP_VM PMCP_VM Master CDF CATDESC: 'PLASTIC Microchannel Plate Voltage Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PMCP_CM_DC PMCP_CM_DC Master CDF CATDESC: 'PLASTIC Microchannel Plate DC Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PMCP_CM_AC PMCP_CM_AC Master CDF CATDESC: 'PLASTIC Microchannel Plate AC Current Monitor -- not in use'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535 PSSD_CM_DC PSSD_CM_DC Master CDF CATDESC: 'PLASTIC Solid State Detector DC Current Monitor – primary si'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PS_CH_VM PS_CH_VM Master CDF CATDESC: 'PLASTIC S-Channel Voltage Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PS_CH_VM_TAP PS_CH_VM_TAP Master CDF CATDESC: 'PLASTIC S-Channel Voltage Monitor Tap'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PS_CH_CM_DC PS_CH_CM_DC Master CDF CATDESC: 'PLASTIC S-Channel DC Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PESA_VM_NEG PESA_VM_NEG Master CDF CATDESC: 'PLASTIC Electrostatic Analyzer Negative Voltage Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PESA_CM_DC PESA_CM_DC Master CDF CATDESC: 'PLASTIC Electrostatic Analyzer DC Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PDFL_1_CM_DC PDFL_1_CM_DC Master CDF CATDESC: 'PLASTIC Deflection 1 HV DC Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PDFL_2_CM_DC PDFL_2_CM_DC Master CDF CATDESC: 'PLASTIC Deflection 2 HV DC Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PLVC_P2VB_IMON PLVC_P2VB_IMON Master CDF CATDESC: 'PLASTIC low voltage converter +2.5 V b Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PLVC_P12V_IMON PLVC_P12V_IMON Master CDF CATDESC: 'PLASTIC low voltage converter +12 V Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PLVC_N12V_IMON PLVC_N12V_IMON Master CDF CATDESC: 'PLASTIC low voltage converter -12 V Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PLVC_P5V_IMON PLVC_P5V_IMON Master CDF CATDESC: 'PLASTIC low voltage converter +5 V Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PLVC_N5V_IMON PLVC_N5V_IMON Master CDF CATDESC: 'PLASTIC low voltage converter -5 V Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PLVC_P2VA_IMON PLVC_P2VA_IMON Master CDF CATDESC: 'PLASTIC low voltage converter +2.5 V a Current Monitor'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' mA -1e+31 PSSD_VM PSSD_VM Master CDF CATDESC: 'PLASTIC Solid State Detector Voltage Monitor - primary side estimate'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PPLUG_ID PPLUG_ID Master CDF CATDESC: 'PLASTIC high voltage limit plug (none—HV fully enable'. Master CDF VAR_NOTES: '0000 full HV disable 0001 HV register limit (in which an HV setpoint is compared to a register value for safety during ground testing; not used in flight) 0010 HV hard limit (maximum setpoints are limited for testing in air; not used in flight) 1111 HV full enable (flight use)'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 PADC_LU_FLAG PADC_LU_FLAG Master CDF CATDESC: 'PLASTIC DAC Boards Analog to Digital Converter latchup flag'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 PDAC_STATUS PDAC_STATUS Master CDF CATDESC: 'PLASTIC DAC Board Status'. Master CDF VAR_NOTES: 'Bit 0 (LSB) adc_lu_det - latchup has been detected (1 means latchup has been detected) Bit 2 adc_hung Bit 3 lu_ctr_ovfl Bit 4 pac_cm_f_n - PAC current monitor flag Bit 5 mcp_cm_f_n - MCP current monitor flag '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 PADC_LU_CTR PADC_LU_CTR Master CDF CATDESC: 'PLASTIC DAC Board Analog to Digital Converter latchup counter'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 255 PDHK_SPARE PDHK_SPARE Master CDF CATDESC: 'PDHK_SPARE'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535 PADC0_AGND PADC0_AGND Master CDF CATDESC: 'PLASTIC Analog to Digital Converter 0 Analog Ground'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' -1e+31 PADC1_AGND PADC1_AGND Master CDF CATDESC: 'PLASTIC Analog to Digital Converter 1 Analog Ground'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' -1e+31 PRA_E0 PRA_E0 Master CDF CATDESC: 'PLASTIC Resistive Anode Charge Amplifier Output 0'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' -1e+31 PRA_E1 PRA_E1 Master CDF CATDESC: 'PLASTIC Resistive Anode Charge Amplifier Output 1'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' -1e+31 PTAC0_TSP PTAC0_TSP Master CDF CATDESC: 'PLASTIC Time to Amplitude Converter board 0 temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PTAC2_TSP PTAC2_TSP Master CDF CATDESC: 'PLASTIC Time to Amplitude Converter board 2 temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PSB0_TSP PSB0_TSP Master CDF CATDESC: 'PLASTIC Signal Board 0 temperature -- not in use'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PSB1_TSP PSB1_TSP Master CDF CATDESC: 'PLASTIC Signal Board 1 temperature -- not in use'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PTOF_HV0_TSP PTOF_HV0_TSP Master CDF CATDESC: 'PLASTIC Time-of-Flight System High Voltage 0 temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PTOF_HV1_TSP PTOF_HV1_TSP Master CDF CATDESC: 'PLASTIC Time-of-Flight System High Voltage 1 temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PS_C_0_TSP PS_C_0_TSP Master CDF CATDESC: 'Spacecraft/Instrument Case temperature 0'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PS_C_1_TSP PS_C_1_TSP Master CDF CATDESC: 'PLASTIC Spacecraft/Instrument Case temperature 1'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PLVC0_TSP PLVC0_TSP Master CDF CATDESC: 'PLASTIC Low voltage converter 0 temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PLVC1_TSP PLVC1_TSP Master CDF CATDESC: 'PLASTIC Low voltage converter 1 temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PADC0_VREF PADC0_VREF Master CDF CATDESC: 'PLASTIC Analog to Digital Converter 0 reference voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PADC1_VREF PADC1_VREF Master CDF CATDESC: 'PLASTIC Analog to Digital Converter 1 reference voltage'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PSSD_STATUS PSSD_STATUS Master CDF CATDESC: 'PLASTIC Solid State Detector Status'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535 PSSD_V_POS_ANALOG PSSD_V_POS_ANALOG Master CDF CATDESC: 'PLASTIC Solid State Detector Positive Voltage (Analog)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PSSD_V_NEG_ANALOG PSSD_V_NEG_ANALOG Master CDF CATDESC: 'PLASTIC Solid State Detector Negative Voltage (Analog)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PSSD_HV_BIAS PSSD_HV_BIAS Master CDF CATDESC: 'PLASTIC Solid State Detector High Voltage Bias'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 PSSD_TC0 PSSD_TC0 Master CDF CATDESC: 'PLASTIC Solid State Detector 0 Temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PSSD_TC1 PSSD_TC1 Master CDF CATDESC: 'PLASTIC Solid State Detector 1 Temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PSSD_TC2 PSSD_TC2 Master CDF CATDESC: 'PLASTIC Solid State Detector 2 Temperature'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' C -1e+31 PSSD_V_POS_DIG PSSD_V_POS_DIG Master CDF CATDESC: 'PLASTIC Solid State Detector Positive Voltage (Digital)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' V -1e+31 Sample Time SampleTime Master CDF CATDESC: 'Sample time as reported by IDPU'. Master CDF VAR_NOTES: 'To convert to time: 4 MSB = hours 6 middle bits = minutes 6 LSB = seconds'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.' 65535