{ "Spase": { "xmlns": "http://www.spase-group.org/data/schema", "xmlns:xsi": "http://www.w3.org/2001/XMLSchema-instance", "xsi:schemaLocation": "http://www.spase-group.org/data/schema http://www.spase-group.org/data/schema/spase-2_6_1.xsd", "_Note": "Nodes prefixed with a _ are not valid SPASE, but are included for debugging. Values prefixed with a x_ are not valid SPASE but may considered for addition for completeness.", "Version": "2.6.1", "_MasterURL": "https://cdaweb.gsfc.nasa.gov/pub/software/cdawlib/0JSONS/voyager2_48s_mag_00000000_v01.json (from all.xml)", "NumericalData": { "ResourceID": "spase://NASA/NumericalData/Voyager2/MAG/CDF/PT48S", "_ResourceID": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ResourceID.json", "ResourceHeader": { "ResourceName": "48 Second Averaged Interplanetary Magnetic Field", "_ResourceName": "Source: Master/CDFglobalAttributes/Logical_source_description", "AlternateName": "voyager2_48s_mag", "_AlternateName": "Source: Master/CDFglobalAttributes/Logical_source", "Description": "This data set includes the Voyager spacecraft number (1 or 2), the date-time in decimal year (90.00000 is day 1 of 1990), the magnetic field strength F1 computed from high-resolution magnitudes, the elevation and azimuth angles (degrees) in heliographic (RTN) coordinates, and the magnetic field strength F2 computed from hour averages of the components. The vector components of B can be computed from F2 and the two angles. Elevation angle is the latitude angle above or below the solar equatorial plane, and azimuth angle is in the direction orbital motion around the Sun from the projection of the Sun-to-spacecraft axis into the solar equatorial plane. The Voyager MAG experiment and coordinates are further described in the following publication: Behannon, K.W., M.H. Acuna, L.F. Burlaga, R.P. Lepping, N.F. Ness, and F.M. Neubauer, Magnetic-Field Experiment for Voyager-1 and Voyager-2, Space Science Reviews, 21 (3), 235-257, 1977...At the time of experiment proposal, it was expected that the required accuracy of the measurements would be 0.1 nT, determined by the combined noise of the sensors and the spacecraft field. The spacecraft magnetic field at the outboard magnetic field sensor, referred to as the primary unit, was expected to be 0.2 nT and highly variable, consistent with current estimates. Hence, the dual magnetometer design (Ness et al., 1971, 1973; Behannon et al. 1977). ..At distances > 40 AU, the heliospheric magnetic fields are generally much weaker than 0.4 nT; the average magnetic field strength near 40 AU and 85 AU is about 0.15 nT and 0.05 nT, respectively. The use of roll calibrations lasting about 6 hours permits determination of the effective zero levels for the two independent magnetic axes that are perpendicular to the roll axis (which is nearly parallel to the radius vector to the Sun) at intervals of about 3 months. There is no roll calibration for the third magnetic axis. Comparison of the two derived magnetic vectors from the two magnetometers permits validation of the primary magnetometer data with an accuracy of 0.02 to 0.05 nT. A discussion of the uncertainties that must be considered when using these data is given in the Appendix of Burlaga et al. [1994] and in Appendix A of Burlaga et al. [2002]. ..References: ..Behannon, K.W., M.H. Acuna, L.F. Burlaga, R.P. Lepping, N.F. Ness, and F.M. Neubauer, Magnetic-Field Experiment for Voyager-1 and Voyager-2, Space Science Reviews, 21 (3), 235-257, 1977. ..Burlaga, L.F., Merged interaction regions and large-scale magnetic field fluctuations during 1991 - Voyager-2 observations, J. Geophys. Res., 99 (A10), 19341-19350, 1994. ..Burlaga, L.F., N.F. Ness, Y.-M. Wang, and N.R. Sheeley Jr., Heliospheric magnetic field strength and polarity from 1 to 81 AU during the ascending phase of solar cycle 23, J. Geophys. Res., 107 (A11), 1410, 2002. ..Ness, N., K.W. Behannon, R. Lepping, and K.H. Schatten, J. Geophys. Res., 76, 3564, 1971. ..Ness et al., 1973At distances > 40 AU, the heliospheric magnetic fields are generally much weaker than 0.4 nT; the average magnetic field strength near 40 AU and 85 AU is about 0.15 nT and 0.05 nT, respectively. The use of roll calibrations lasting about 6 hours permits determination of the effective zero levels for the two independent magnetic axes that are perpendicular to the roll axis (which is nearly parallel to the radius vector to the Sun) at intervals of about 3 months. There is no roll calibration for the third magnetic axis. Comparison of the two derived magnetic vectors from the two magnetometers permits validation of the primary magnetometer data with an accuracy of 0.02 to 0.05 nT. A discussion of the uncertainties that must be considered when using these data is given in the Appendix of Burlaga et al. [1994] and in Appendix A of Burlaga et al. [2002].COORDINATE SYSTEMS: Interplanetary magnetic field studies make use of two important coordinate systems, the Inertial Heliographic (IHG) coordinate system and the Heliographic (HG) coordinate system.The IHG coordinate system is use to define the spacecraft's position. The IHG system is defined with its origin at the Sun. There are three orthogonal axes, X(IHG), Y(IHG), and Z(IHG). The Z(IHG) axis points northward along the Sun's spin axis. The X(IHG) - Y(IHG) plane lays in the solar equatorial plane. The intersection of the solar equatorial plane with the ecliptic plane defines a line, the longitude of the ascending node, which is taken to be the X(IHG) axis. The X(IHG) axis drifts slowly with time, approximately one degree per 72 years.Magnetic field orientation is defined in relation to the spacecraft. Drawing a line from the Sun's center (IHG origin) to the spacecraft defines the X axis of the HG coordinate system. The HG coordinate system is defined with its origin centered at the spacecraft. Three orthogonal axes are defined, X(HG), Y(HG), and Z(HG). The X(HG) axis points radially away from the Sun and the Y(HG) axis is parallel to the solar equatorial plane and therefore parallel to the X(IHG)-Y(IHG) plane too. The Z(HG) axis is chosen to complete the orthonormal triad. An excellent reference guide with diagrams explaining the IHG and HG systems may be found in Space and Science Reviews, Volume 39 (1984), pages 255-316, MHD Processes in the Outer Heliosphere, L. F. Burlaga.Support data calib_flag_on, calib_flag_MF and calib_flag_offset are added to file version 2. Variable calib_flag_on consists of points where bit 4 or 5 in variable magStatus equal 1. Variable calib_flag_MF represents observations where magnetometer was in cailbration mode. Variable calib_flag_offset represent delay between data points where magnetometer was in calibration mode and data points where magStatus variable indicated calibration periods.Due to specific shape of magnetometer data profile variable calibration_flag_MF may cover larger intervals than calibration_flag_on.", "_Description": "Source: Master/CDFglobalAttributes/TEXT", "Acknowledgement": "Please acknowledge the Principal Investigator, Norman F. Ness of the Bartol Research Institute, University of Delaware in publications and presentations.", "_Acknowledgement": "Source: Master/CDFglobalAttributes/Acknowledgement", "_Rights": { "Name": "SPDX", "Description": "Creative Commons Zero v1.0 Universal", "URL": "https://spdx.org/licenses/CC0-1.0.html", "SchemeURI": "https://spdx.org/licenses/" }, "InformationURL": [ { "Name": "as defined for the original VMS binary format", "URL": "https://spdf.gsfc.nasa.gov/pub/data/voyager/voyager2/magnetic_fields/ip_48s_ascii/doc_mag_ip_vy_hires.txt", "Description": "Detailed Description of Variables", "_Note": "URL also in all.xml, master. Using InformationURL.json." } ] }, "ProviderResourceName": "Voyager2", "Caveats": " ", "_Caveats": "Source: Master/CDFglobalAttributes/Rules_of_use", "DOI": "https://doi.org/10.48322/rjwx-xr84", "_DOI": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/DOI.json", "AccessInformation": [ { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Adam Szabo at NASA GSFC", "Format": [ "CDF" ], "Style": "Listing", "AccessURL": { "Name": "HTTPS from SPDF", "URL": "https://cdaweb.gsfc.nasa.gov/pub/data/voyager/voyager2/magnetic_fields_cdaweb/mag_48s", "Description": "In CDF via HTTP from CDAWeb", "AccessFilenameTemplate": "voyager2_48s_mag_%Y%m%d_%Q.cdf", "AccessDirectoryTemplate": "%Y", "ProductKey": "VOYAGER2_48S_MAG" } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Adam Szabo at NASA GSFC", "Format": [ "CDF" ], "Style": "Listing", "AccessURL": { "Name": "FTPS from SPDF", "URL": "ftps://cdaweb.gsfc.nasa.gov/pub/data/voyager/voyager2/magnetic_fields_cdaweb/mag_48s", "Description": "In CDF via HTTP from CDAWeb", "AccessFilenameTemplate": "voyager2_48s_mag_%Y%m%d_%Q.cdf", "AccessDirectoryTemplate": "%Y", "ProductKey": "VOYAGER2_48S_MAG" } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Adam Szabo at NASA GSFC", "Format": [ "CDF", "CSV", "GIF", "NetCDF", "PNG", "PS", "PDF", "XML", "x_Script.IDL", "x_Script.Python", "Text.ASCII", "x_WAV" ], "AccessURL": { "Name": "CDAWeb Web Service", "URL": "https://cdaweb.gsfc.nasa.gov/WebServices/", "Style": "WebService", "Description": "Instructions for using web services to access this dataset an other other metadata and options for CDAWeb datasets. The ProductKey here corresponds to the query parameter 'dataset' in the tables at the AccessURL in a dataset-related request can be made.", "ProductKey": "VOYAGER2_48S_MAG" } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Adam Szabo at NASA GSFC", "Format": [ "CDF", "GIF", "PDF", "Text.ASCII", "x_WAV" ], "AccessURL": { "Name": "CDAWeb Web Service user interface", "URL": "https://cdaweb.gsfc.nasa.gov/cgi-bin/eval2.cgi?index=sp_phys&dataset=VOYAGER2_48S_MAG", "Style": "WebService", "ProductKey": "VOYAGER2_48S_MAG", "Description": "Web service user interface for this product." } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: Adam Szabo at NASA GSFC", "Format": [ "x_Script.IDL", "x_Script.Python" ], "AccessURL": { "Name": "CDAWeb Python Script", "URL": "https://cdaweb.gsfc.nasa.gov/WS/cdasr/1/dataviews/sp_phys/datasets/VOYAGER2_48S_MAG/clientLibraryExample/", "ProductKey": "VOYAGER2_48S_MAG", "Style": "WebService", "Description": "Web service that generates a Python script to access this product." } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/SSCWeb. Please also acknowledge the data producer: Adam Szabo at NASA GSFC", "Format": [ "HTML" ], "AccessURL": { "Name": "4D Orbit Viewer", "URL": "https://sscweb.gsfc.nasa.gov/4dorbit/?sc=VOYAGER2_48S_MAG", "ProductKey": "VOYAGER2_48S_MAG", "Style": "x_Visualization", "Description": "Web Service to this product." } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Adam Szabo at NASA GSFC", "Format": [ "CSV", "JSON", "Binary" ], "AccessURL": { "Name": "CDAWeb HAPI Server", "URL": "https://hapi-server.org/servers/#server=CDAWeb&dataset=VOYAGER2_48S_MAG", "Style": "HAPI", "ProductKey": "VOYAGER2_48S_MAG", "Description": "Web Service to this product using the HAPI interface." } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Adam Szabo at NASA GSFC", "Format": [ "x_Script.IDL", "x_Script.Javascript", "x_Script.MATLAB", "x_Script.Python", "x_Script.Autoplot", "x_Script.curl", "x_Script.wget" ], "AccessURL": { "Name": "CDAWeb HAPI Script in Multiple Languages", "URL": "https://hapi-server.org/servers/#server=CDAWeb&dataset=VOYAGER2_48S_MAG&return=script", "Style": "HAPI", "ProductKey": "VOYAGER2_48S_MAG", "Description": "Web Service user interface that generates scripts in IDL, Javascript, MATLAB, Python, Autoplot, curl, wget to access this product. See https://hapi-server.org/servers/api for the API." } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: Adam Szabo at NASA GSFC", "Format": [ "PNG", "PDF", "SVG" ], "AccessURL": { "Name": "HAPI visualizations", "URL": "https://hapi-server.org/plot/?server=https://cdaweb.gsfc.nasa.gov/hapi&dataset=VOYAGER2_48S_MAG&format=gallery", "Style": "x_Visualization", "ProductKey": "VOYAGER2_48S_MAG", "Description": "Web Service that generates plots. See https://hapi-server.org/plot/ for the API." } } ], "_AccessInformation": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/AccessInformation.json", "TemporalDescription": { "TimeSpan": { "StartDate": "1977-08-20T15:57:30Z", "StopDate": "1991-01-01T00:01:09Z" }, "_TemporalDescription": "Generated from all.xml/@timerange_start and all.xml/@timerange_stop", "Cadence": "PT48S", "_Cadence": "Counts based on variable 'Epoch' in https://cdaweb.gsfc.nasa.gov/sp_phys/data/voyager/voyager2/magnetic_fields_cdaweb/mag_48s/1977/voyager2_48s_mag_19770820_v02.cdf. The most common cadence, 48000 [ms] = PT48S, occurred for 91.8867% of the 4802 timesteps. " }, "Keyword": [ "Voyager2 (from all.xml/observatory/description/@short)", "Triaxial Fluxgate Magnetometer (from all.xml/instrument/description/@short)", "Space Physics (from Master/CDFglobalAttributes/Discipline)", "Interplanetary Studies (from Master/CDFglobalAttributes/Discipline)", "Solar Physics (from Master/CDFglobalAttributes/Discipline)", "Heliospheric Physics (from Master/CDFglobalAttributes/Discipline)", "Voyager2 (from Master/CDFglobalAttributes/Source_name)", "48s (from Master/CDFglobalAttributes/Data_type)", "48 second resolution (from Master/CDFglobalAttributes/Data_type)", "MAG (from all.xml/instrument/@ID)" ], "ObservedRegion": [ "Heliosphere.Heliosheath", "Heliosphere.Outer", "Heliosphere" ], "_ObservedRegion": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ObservedRegion.json", "ProcessingLevel": null, "_ProcessingLevel": "Processing level is not available in the master file; it should be there instead of, say, https://github.com/rweigel/cdawmeta-spase/blob/main/ProcessingLevel.json", "InstrumentID": "spase://SMWG/Instrument/Voyager2/MAG", "MeasurementType": "MagneticField", "Parameter2": [ { "Name": "Time", "ParameterKey": "Epoch", "Description": "CATDESC: 'Time, beginning of interval'. Notes not in Master CDF: 'The units are the units in CDF files. For other web services, this variable is may be represented as a time string.'", "Units": "ms", "Support": { "Qualifier": "Scalar", "SupportQuantity": "Temporal" } }, { "Name": "Data Identifier", "ParameterKey": "dataID", "Description": "Master CDF CATDESC: '[LIST ONLY] Data Identifier (HDR1 or LFM)'. Master CDF VAR_NOTES: ' '. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Telemetry Format", "ParameterKey": "telemetryFormat", "Description": "Master CDF CATDESC: '[LIST ONLY] Telemetry Format'. Master CDF VAR_NOTES: 'ENG,CR-1,CR-2,CR-3,CR-4,CR-5,CR-6,CR-7,CR5A,GS-2,GS-3,GS-4,GS-6,GS-7,GS-8,GS10,G10A,OC-1,OC-2,UV5A,****)'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "S/C Identification", "ParameterKey": "SCid", "Description": "Master CDF CATDESC: '[LIST ONLY] S/C Identification'. Master CDF VAR_NOTES: 'FLT1,FLT2,PTM ,SIM1,SIM2,UKWN'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Decimal Day of Year", "ParameterKey": "decimalDOY", "Description": "Master CDF CATDESC: 'Decimal Day of Year (Jan. 1 = 0)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "degrees ", "FillValue": 999.0 }, { "Name": "Decimal Day Count", "ParameterKey": "decimalDayCnt", "Description": "Master CDF CATDESC: 'Decimal Day Count since August 20, 1977'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "degrees ", "FillValue": 999.0 }, { "Name": "Time Type", "ParameterKey": "timeType", "Description": "Master CDF CATDESC: '[LIST ONLY] Time Type (SCET = spacecraft event time, ERTS = start earth receive time)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Time period of data block (48 sec)", "ParameterKey": "timePeriod", "Description": "Master CDF CATDESC: 'Time period of data block (48 sec)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": 999.0 }, { "Name": "48 Minute Counter", "ParameterKey": "min48ctr", "Description": "Master CDF CATDESC: '48 Minute Counter (2**16 sequence counter of data at time of telemetry readout.'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "48 Second Counter", "ParameterKey": "sec48ctr", "Description": "Master CDF CATDESC: '48 Second Counter (Modulo 60 sequence counter of data at time of telemetry readout.) '. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "60 Millisecond Counter", "ParameterKey": "msec60ctr", "Description": "Master CDF CATDESC: '60 Millisecond Counter (Line counter of data at time of telemetry readout.)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "MagStatus", "ParameterKey": "magStatus", "Description": "Master CDF CATDESC: 'MAG Status Word'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "MagCommand", "ParameterKey": "magCommand", "Description": "Master CDF CATDESC: '---> MAG Command Word'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Data Identifier", "ParameterKey": "DataIdInt", "Description": "Master CDF CATDESC: 'Data Identifier (LFM=2,HDR1=8)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Data Rate", "ParameterKey": "DataRate", "Description": "Master CDF CATDESC: 'Data Rate'. Master CDF VAR_NOTES: 'GS-X=0,CR-1=1,CR-2=2,CR-3=3,CR-4=4,CR-5=5,CR-6=6,CR-7=9,ENG=8,CR5A=13,UV5A=13: CR5A and UV5A are both VIM-5 modes'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "MAG data confidence", "ParameterKey": "dataConfidence", "Description": "Master CDF CATDESC: '---> Data Confidence Flag (indicates reduced data confidence due to software/hardware intervention)'. Master CDF VAR_NOTES: 'Appears to be all fill data - REM 2/27/2014'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "(0=OK) ", "Structure": { "Size": [ 8 ] } }, { "Name": "Number of primary data words", "ParameterKey": "numPrimaryData", "Description": "Master CDF CATDESC: 'Number of primary data words'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Number of Secondary data words", "ParameterKey": "numSecondaryData", "Description": "Master CDF CATDESC: 'Number of Secondary data words'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Number of primary Full words", "ParameterKey": "numPrimaryFull", "Description": "Master CDF CATDESC: 'Number of primary Full words'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Number of Secondary Full words", "ParameterKey": "numSecondaryFull", "Description": "Master CDF CATDESC: 'Number of Secondary Full words'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Record number in file", "ParameterKey": "recNumber", "Description": "Master CDF CATDESC: 'Record number in file'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Number of words remaining in logical record", "ParameterKey": "numWordsRemaining", "Description": "Master CDF CATDESC: 'Number of words remaining in logical record'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "F1", "ParameterKey": "F1", "Description": "Master CDF CATDESC: 'B-Magnitude by Method 1 (F1): 48 second average of 9.6 second magnitudes'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "F2", "ParameterKey": "F2", "Description": "Master CDF CATDESC: 'B-Magnitude by Method 2 (F2): average derived from 48 second component averages=sqrt(B1**2+B2**2+B3**2)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BR", "ParameterKey": "B1", "Description": "Master CDF CATDESC: 'BR (B1): 48 second average of 9.6 second averages of the B-radial component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BT", "ParameterKey": "B2", "Description": "Master CDF CATDESC: '---> BT (B2): 48 second average of 9.6 second averages of the B-tangential component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BN", "ParameterKey": "B3", "Description": "Master CDF CATDESC: '---> BN (B3): 48 second average of 9.6 second averages of the B-normal component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "F1", "ParameterKey": "F1_100nt", "Description": "Master CDF CATDESC: '[100nT plot scale] B-Magnitude by Method 1 (F1): 48 second average of 9.6 second magnitudes'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "F2", "ParameterKey": "F2_100nt", "Description": "Master CDF CATDESC: '---> B-Magnitude by Method 2 (F2): average derived from 48 second component averages=sqrt(B1**2+B2**2+B3**2)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BR", "ParameterKey": "B1_100nt", "Description": "Master CDF CATDESC: '---> BR (B1): 48 second average of 9.6 second averages of the B-radial component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BT", "ParameterKey": "B2_100nt", "Description": "Master CDF CATDESC: '---> BT (B2): 48 second average of 9.6 second averages of the B-tangential component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BN", "ParameterKey": "B3_100nt", "Description": "Master CDF CATDESC: '---> BN (B3): 48 second average of 9.6 second averages of the B-normal component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "F1", "ParameterKey": "F1_10nt", "Description": "Master CDF CATDESC: '[10nT plot scale] B-Magnitude by Method 1 (F1): 48 second average of 9.6 second magnitudes'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "F2", "ParameterKey": "F2_10nt", "Description": "Master CDF CATDESC: '---> B-Magnitude by Method 2 (F2): average derived from 48 second component averages=sqrt(B1**2+B2**2+B3**2)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BR", "ParameterKey": "B1_10nt", "Description": "Master CDF CATDESC: '---> BR (B1): 48 second average of 9.6 second averages of the B-radial component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BT", "ParameterKey": "B2_10nt", "Description": "Master CDF CATDESC: '---> BT (B2): 48 second average of 9.6 second averages of the B-tangential component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BN", "ParameterKey": "B3_10nt", "Description": "Master CDF CATDESC: '---> BN (B3): 48 second average of 9.6 second averages of the B-normal component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "F1", "ParameterKey": "F1_1nt", "Description": "Master CDF CATDESC: '[1nT plot scale] B-Magnitude by Method 1 (F1): 48 second average of 9.6 second magnitudes'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "F2", "ParameterKey": "F2_1nt", "Description": "Master CDF CATDESC: '---> B-Magnitude by Method 2 (F2): average derived from 48 second component averages=sqrt(B1**2+B2**2+B3**2)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BR", "ParameterKey": "B1_1nt", "Description": "Master CDF CATDESC: '---> BR (B1): 48 second average of 9.6 second averages of the B-radial component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BT", "ParameterKey": "B2_1nt", "Description": "Master CDF CATDESC: '---> BT (B2): 48 second average of 9.6 second averages of the B-tangential component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BN", "ParameterKey": "B3_1nt", "Description": "Master CDF CATDESC: '---> BN (B3): 48 second average of 9.6 second averages of the B-normal component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "F1", "ParameterKey": "F1_dot1nt", "Description": "Master CDF CATDESC: '[0.1nT plot scale] B-Magnitude by Method 1 (F1): 48 second average of 9.6 second magnitudes'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "F2", "ParameterKey": "F2_dot1nt", "Description": "Master CDF CATDESC: '---> B-Magnitude by Method 2 (F2): average derived from 48 second component averages=sqrt(B1**2+B2**2+B3**2)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BR", "ParameterKey": "B1_dot1nt", "Description": "Master CDF CATDESC: '---> BR (B1): 48 second average of 9.6 second averages of the B-radial component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BT", "ParameterKey": "B2_dot1nt", "Description": "Master CDF CATDESC: '---> BT (B2): 48 second average of 9.6 second averages of the B-tangential component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "BN", "ParameterKey": "B3_dot1nt", "Description": "Master CDF CATDESC: '---> BN (B3): 48 second average of 9.6 second averages of the B-normal component in HG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "Latitudinal field angle", "ParameterKey": "lat", "Description": "Master CDF CATDESC: '---> Latitudinal field angle in HG coords= arcsin(B3/F2)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "deg", "FillValue": 999.0 }, { "Name": "---> Longitudinal field angle", "ParameterKey": "lon", "Description": "Master CDF CATDESC: '---> Longitudinal field angle in HG coords = 180 - atan(B2,-B1)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "deg", "FillValue": 999.0 }, { "Name": "RMS of BR", "ParameterKey": "RMSB1", "Description": "Master CDF CATDESC: 'RMS of BR'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "---> RMS of BT", "ParameterKey": "RMSB2", "Description": "Master CDF CATDESC: '---> RMS of BT'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "---> RMS of BN", "ParameterKey": "RMSB3", "Description": "Master CDF CATDESC: '---> RMS of BN'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "---> Num 9.6 averages", "ParameterKey": "num9_6_averages", "Description": "Master CDF CATDESC: '---> Number of 9.6 averages per 48 second average (0 48 second average of s/c BT'. Master CDF VAR_NOTES: 'Appears to be all fill data - REM 2/27/2014'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "48 second average s/c BN", "ParameterKey": "avg3_48", "Description": "Master CDF CATDESC: '---> 48 second average s/c BN'. Master CDF VAR_NOTES: 'Appears to be all fill data - REM 2/27/2014'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "norm of 48 sec avg", "ParameterKey": "norm48", "Description": "Master CDF CATDESC: '---> Norm of 48 second s/c field component averages'. Master CDF VAR_NOTES: 'Appears to be all fill data - REM 2/27/2014'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "RMS of 48 second averaged s/c BR", "ParameterKey": "RMS1_48", "Description": "Master CDF CATDESC: '---> RMS of 48 second averaged s/c BR'. Master CDF VAR_NOTES: 'Appears to be all fill data - REM 2/27/2014'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "RMS of 48 second averaged s/c BT", "ParameterKey": "RMS2_48", "Description": "Master CDF CATDESC: '---> RMS of 48 second averaged s/c BT'. Master CDF VAR_NOTES: 'Appears to be all fill data - REM 2/27/2014'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "RMS of 48 second averaged s/c BN", "ParameterKey": "RMS3_48", "Description": "Master CDF CATDESC: '---> RMS of 48 second averaged s/c BN'. Master CDF VAR_NOTES: 'Appears to be all fill data - REM 2/27/2014'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "nT", "FillValue": 999.0 }, { "Name": "Numb 9.6 fld avg", "ParameterKey": "num_9_6", "Description": "Master CDF CATDESC: '---> Number of 9.6 s/c field averages per 48 second average (0 V1 Y position in IHG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "AU", "FillValue": 999.0 }, { "Name": "V1 Z position in IHG coords", "ParameterKey": "z", "Description": "Master CDF CATDESC: '---> V1 Z position in IHG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "AU", "FillValue": 999.0 }, { "Name": "V1 X velocity in IHG coords", "ParameterKey": "xvel", "Description": "Master CDF CATDESC: 'V1 X velocity in IHG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "km/s", "FillValue": 999.0 }, { "Name": "V1 Y velocity in IHG coords", "ParameterKey": "yvel", "Description": "Master CDF CATDESC: '---> V1 Y velocity in IHG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "km/s", "FillValue": 999.0 }, { "Name": "V1 Z velocity in IHG coords", "ParameterKey": "zvel", "Description": "Master CDF CATDESC: '---> V1 Z velocity in IHG coords'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "km/s", "FillValue": 999.0 }, { "Name": "V1 distance from the Sun", "ParameterKey": "scDistance", "Description": "Master CDF CATDESC: 'V1 distance from the Sun'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "Au", "FillValue": 999.0 }, { "Name": "V1 longitude in IHG coords", "ParameterKey": "scLon", "Description": "Master CDF CATDESC: '---> V1 longitude in IHG coords = asin(Z/R)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "radians", "FillValue": 999.0 }, { "Name": "V1 latitude in IHG coords", "ParameterKey": "scLat", "Description": "Master CDF CATDESC: '---> V1 latitude in IHG coords = asin(Z/R)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "radians", "FillValue": 999.0 }, { "Name": "matrix1", "ParameterKey": "matrix1", "Description": "Master CDF CATDESC: 'Matrix1: transforms 3-element vector from Inertial Heliographic (IHG) to Heliographic (HG)coordinates.'. Master CDF VAR_NOTES: 'Matrix 1 transforms three element vector from Inertial Heliographic to heliographic coordinates.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": 999.0, "Structure": { "Size": [ 9 ] } }, { "Name": "matrix2", "ParameterKey": "matrix2", "Description": "Master CDF CATDESC: '---> Matrix2: transforms 3-element vector from Earth Mean ecliptic, Equinox of 1950 (EME 50) to Heliographic (HG) coordinates.'. Master CDF VAR_NOTES: 'Matrix 2 transforms three element vector from Earth Mean ecliptic, Equinox of 1950 (EME 50) to Heliographic (HG) coordinates.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": 999.0, "Structure": { "Size": [ 9 ] } }, { "Name": "matrix3", "ParameterKey": "matrix3", "Description": "Master CDF CATDESC: '---> Matrix3: transforms 3-element vector from payload coordinates to Heliographic (HG) coordinates.'. Master CDF VAR_NOTES: 'Matrix 3 transforms three element vector from payload coordinates to Heliographic coordinates.'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": 999.0, "Structure": { "Size": [ 9 ] } }, { "Name": "Record Type (header)", "ParameterKey": "recTypeHead", "Description": "Master CDF CATDESC: '[LIST ONLY] Record Type (header'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Telemetry Format (header)", "ParameterKey": "telFmtHead", "Description": "Master CDF CATDESC: '[LIST ONLY] Telemetry Format (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Spacecraft ID (header)", "ParameterKey": "scIDHead", "Description": "Master CDF CATDESC: '[LIST ONLY] Spacecraft ID (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "time (header)", "ParameterKey": "timeHead", "Description": "Master CDF CATDESC: 'time (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": -1, "Structure": { "Size": [ 6 ] } }, { "Name": "run year (header)", "ParameterKey": "runYearHead", "Description": "Master CDF CATDESC: 'run year (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "calendar day (header)", "ParameterKey": "calDayHead", "Description": "Master CDF CATDESC: 'calendar day (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "run month (header)", "ParameterKey": "runMonthHead", "Description": "Master CDF CATDESC: '[LIST ONLY] run month (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "run day (header)", "ParameterKey": "runDayHead", "Description": "Master CDF CATDESC: 'run day (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "run type (header)", "ParameterKey": "runTypeHead", "Description": "Master CDF CATDESC: '[LIST ONLY] run type (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "coord (header)", "ParameterKey": "coordHead", "Description": "Master CDF CATDESC: '[LIST ONLY] run type (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "dataID (header)", "ParameterKey": "dataIDHead", "Description": "Master CDF CATDESC: 'dataID (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": -1, "Structure": { "Size": [ 2 ] } }, { "Name": "word32 (header)", "ParameterKey": "word32Head", "Description": "Master CDF CATDESC: 'word32 (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": -1, "Structure": { "Size": [ 2 ] } }, { "Name": "edrsys (header)", "ParameterKey": "edrsysHead", "Description": "Master CDF CATDESC: 'edrsys (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": -1, "Structure": { "Size": [ 32 ] } }, { "Name": "magsys (header)", "ParameterKey": "magsysHead", "Description": "Master CDF CATDESC: 'magsys (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": -1, "Structure": { "Size": [ 32 ] } }, { "Name": "zeroname (header)", "ParameterKey": "zeroNameHead", "Description": "Master CDF CATDESC: '[LIST ONLY] zeroname (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "sensname (header)", "ParameterKey": "sensNameHead", "Description": "Master CDF CATDESC: '[LIST ONLY] sensname (header)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Record Type (trailer)", "ParameterKey": "recTypeTrail", "Description": "Master CDF CATDESC: '[LIST ONLY] Record Type (trailer'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Telemetry Format (trailer)", "ParameterKey": "telFmtTrail", "Description": "Master CDF CATDESC: '[LIST ONLY] Telemetry Format (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "Spacecraft ID (trailer)", "ParameterKey": "scIDTrail", "Description": "Master CDF CATDESC: '[LIST ONLY] Spacecraft ID (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "time (trailer)", "ParameterKey": "timeTrail", "Description": "Master CDF CATDESC: 'time (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": -1, "Structure": { "Size": [ 6 ] } }, { "Name": "run year (trailer)", "ParameterKey": "runYearTrail", "Description": "Master CDF CATDESC: 'run year (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "calendar day (trailer)", "ParameterKey": "calDayTrail", "Description": "Master CDF CATDESC: 'calendar day (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "run month (trailer)", "ParameterKey": "runMonthTrail", "Description": "Master CDF CATDESC: '[LIST ONLY] run month (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "run day (trailer)", "ParameterKey": "runDayTrail", "Description": "Master CDF CATDESC: 'run day (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "run type (trailer)", "ParameterKey": "runTypeTrail", "Description": "Master CDF CATDESC: '[LIST ONLY] run type (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "coord (trailer)", "ParameterKey": "coordTrail", "Description": "Master CDF CATDESC: '[LIST ONLY] run type (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "dataID (trailer)", "ParameterKey": "dataIDTrail", "Description": "Master CDF CATDESC: 'dataID (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": -1, "Structure": { "Size": [ 2 ] } }, { "Name": "word32 (trailer)", "ParameterKey": "word32Trail", "Description": "Master CDF CATDESC: 'word32 (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": -1, "Structure": { "Size": [ 2 ] } }, { "Name": "edrsys (trailer)", "ParameterKey": "edrsysTrail", "Description": "Master CDF CATDESC: 'edrsys (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": -1, "Structure": { "Size": [ 32 ] } }, { "Name": "magsys (trailer)", "ParameterKey": "magsysTrail", "Description": "Master CDF CATDESC: 'magsys (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " ", "FillValue": -1, "Structure": { "Size": [ 32 ] } }, { "Name": "zeroname (trailer)", "ParameterKey": "zeroNameTrail", "Description": "Master CDF CATDESC: '[LIST ONLY] zeroname (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " }, { "Name": "sensname (trailer)", "ParameterKey": "sensNameTrail", "Description": "Master CDF CATDESC: '[LIST ONLY] sensname (trailer)'. Master CDF VAR_NOTES: ''. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": " " } ] } } }