{ "Spase": { "xmlns": "http://www.spase-group.org/data/schema", "xmlns:xsi": "http://www.w3.org/2001/XMLSchema-instance", "xsi:schemaLocation": "http://www.spase-group.org/data/schema http://www.spase-group.org/data/schema/spase-2_6_1.xsd", "_Note": "Nodes prefixed with a _ are not valid SPASE, but are included for debugging. Values prefixed with a x_ are not valid SPASE but may considered for addition for completeness.", "Version": "2.6.1", "_MasterURL": "https://cdaweb.gsfc.nasa.gov/pub/software/cdawlib/0JSONS/wi_m0_swe_00000000_v01.json (from all.xml)", "NumericalData": { "ResourceID": "spase://NASA/NumericalData/Wind/SWE/M0/PT12S", "_ResourceID": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ResourceID.json", "ResourceHeader": { "ResourceName": "Wind Solar Wind Experiment (SWE), 9 sec solar wind electron pitch-angle distribution averages", "_ResourceName": "Source: Master/CDFglobalAttributes/Logical_source_description", "AlternateName": "wi_m0_swe", "_AlternateName": "Source: Master/CDFglobalAttributes/Logical_source", "Description": "Explanatory notes: The electron pitch-angle distribution averages included in this data set are derived from integrating the electron pitch-angle distributions measured by the Wind/SWE electron instrument (see Ogilvie et al., \"SWE, a comprehensive plasma instrument for the Wind spacecraft\", Space Sci. Rev., 71, 55, 1955).Averages of phase-space density (f) over key regions of the unit sphere (the set of all possible electron velocity directions) are computed from 9s measurements which are usually separated by one or more 3s spin-periods. These quantities are reliable and citable with caution, meaning that the PI advises that the user should discuss their interpretations with a member of the SWE science team before publishing.The following comments are intended to aid in the use and interpretation of the averages reported in this data set. We begin this analysis with a measure of f for each pitch-angle bin, six degrees in width, from 0 degrees (flux nearly parallel to B) to 180 degrees (flux nearly anti-parallel with B). The f values for pitch-angles from 0-90 degrees (parallel streaming) are integrated (with angluar weighting and assumptions of gyrotropy) over this half-sphere, then averaged by dividing out the 2-pi solid angle of the half-sphere; the result being referred to as the 'f_para' average. Similarly, the 'f_perp' (flux nearly perpendicular to B) average is the result of integrating f for pitch-angles from 60-120 degrees (a region also 2-pi in solid angle). Next, the 'f_anti' (flux nearly anti-parallel to B) average covers the half-sphere of \"backward\" streaming electrons; having pitch-angles from 90-180 degrees. Finally, the 'f_omni' (omni-directional) average provides the integral of f over the full sphere, divided by the full 4-pi solid angle; providing a measure of total electron flux into the region of observation. The above analysis is carried out for each of 13 energy channels: E = 19.34, 38.68, 58.03, 77.37, 96.71, 116.1, 193.4, 290.1, 425.5, 580.3, 773.7, 1006., and 1238. eV. For reference, the electron speeds (|V|, in cm/s) corresponding to these energies are reported in this data set. Hence the data set reported here contains: f_para, f_perp, f_anti, f_omni (for each of 13 values of E), and the 13 values of |V| (constant, included for reference).", "_Description": "Source: Master/CDFglobalAttributes/TEXT", "_Rights": { "Name": "SPDX", "Description": "Creative Commons Zero v1.0 Universal", "URL": "https://spdx.org/licenses/CC0-1.0.html", "SchemeURI": "https://spdx.org/licenses/" }, "InformationURL": [ { "URL": "http://wind.nasa.gov/data.php", "Name": "Wind Data Page", "Description": "Additional information about instruments and parameters is available on the ", "_Note": "URL also in all.xml. Using master." }, { "Name": "Wind/SWE Description", "URL": "https://wind.nasa.gov/swe/index.html", "Description": "Wind/SWE (Solar Wind Experiment) electron instruments, history and data products", "_Note": "Source: InformationURL.json" } ] }, "DOI": "https://doi.org/10.48322/jsqc-vm88", "_DOI": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/DOI.json", "AccessInformation": [ { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: K. Ogilvie at NASA/GSFC", "Format": [ "CDF" ], "Style": "Listing", "AccessURL": { "Name": "HTTPS from SPDF", "URL": "https://cdaweb.gsfc.nasa.gov/pub/data/wind/swe/swe_m0", "Description": "In CDF via HTTP from CDAWeb", "AccessFilenameTemplate": "wi_m0_swe_%Y%m%d_%Q.cdf", "AccessDirectoryTemplate": "%Y", "ProductKey": "WI_M0_SWE" } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: K. Ogilvie at NASA/GSFC", "Format": [ "CDF" ], "Style": "Listing", "AccessURL": { "Name": "FTPS from SPDF", "URL": "ftps://cdaweb.gsfc.nasa.gov/pub/data/wind/swe/swe_m0", "Description": "In CDF via HTTP from CDAWeb", "AccessFilenameTemplate": "wi_m0_swe_%Y%m%d_%Q.cdf", "AccessDirectoryTemplate": "%Y", "ProductKey": "WI_M0_SWE" } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: K. Ogilvie at NASA/GSFC", "Format": [ "CDF", "CSV", "GIF", "NetCDF", "PNG", "PS", "PDF", "XML", "x_Script.IDL", "x_Script.Python", "Text.ASCII", "x_WAV" ], "AccessURL": { "Name": "CDAWeb Web Service", "URL": "https://cdaweb.gsfc.nasa.gov/WebServices/", "Style": "WebService", "Description": "Instructions for using web services to access this dataset an other other metadata and options for CDAWeb datasets. The ProductKey here corresponds to the query parameter 'dataset' in the tables at the AccessURL in a dataset-related request can be made.", "ProductKey": "WI_M0_SWE" } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: K. Ogilvie at NASA/GSFC", "Format": [ "CDF", "GIF", "PDF", "Text.ASCII", "x_WAV" ], "AccessURL": { "Name": "CDAWeb Web Service user interface", "URL": "https://cdaweb.gsfc.nasa.gov/cgi-bin/eval2.cgi?index=sp_phys&dataset=WI_M0_SWE", "Style": "WebService", "ProductKey": "WI_M0_SWE", "Description": "Web service user interface for this product." } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb. Please also acknowledge the data producer: K. Ogilvie at NASA/GSFC", "Format": [ "x_Script.IDL", "x_Script.Python" ], "AccessURL": { "Name": "CDAWeb Python Script", "URL": "https://cdaweb.gsfc.nasa.gov/WS/cdasr/1/dataviews/sp_phys/datasets/WI_M0_SWE/clientLibraryExample/", "ProductKey": "WI_M0_SWE", "Style": "WebService", "Description": "Web service that generates a Python script to access this product." } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/SSCWeb. Please also acknowledge the data producer: K. Ogilvie at NASA/GSFC", "Format": [ "HTML" ], "AccessURL": { "Name": "4D Orbit Viewer", "URL": "https://sscweb.gsfc.nasa.gov/4dorbit/?sc=WI_M0_SWE", "ProductKey": "WI_M0_SWE", "Style": "x_Visualization", "Description": "Web Service to this product." } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: K. Ogilvie at NASA/GSFC", "Format": [ "CSV", "JSON", "Binary" ], "AccessURL": { "Name": "CDAWeb HAPI Server", "URL": "https://hapi-server.org/servers/#server=CDAWeb&dataset=WI_M0_SWE", "Style": "HAPI", "ProductKey": "WI_M0_SWE", "Description": "Web Service to this product using the HAPI interface." } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: K. Ogilvie at NASA/GSFC", "Format": [ "x_Script.IDL", "x_Script.Javascript", "x_Script.MATLAB", "x_Script.Python", "x_Script.Autoplot", "x_Script.curl", "x_Script.wget" ], "AccessURL": { "Name": "CDAWeb HAPI Script in Multiple Languages", "URL": "https://hapi-server.org/servers/#server=CDAWeb&dataset=WI_M0_SWE&return=script", "Style": "HAPI", "ProductKey": "WI_M0_SWE", "Description": "Web Service user interface that generates scripts in IDL, Javascript, MATLAB, Python, Autoplot, curl, wget to access this product. See https://hapi-server.org/servers/api for the API." } }, { "RepositoryID": "spase://SMWG/Repository/NASA/GSFC/SPDF", "Availability": "Online", "AccessRights": "Open", "Acknowledgement": "SPDF/CDAWeb and the HAPI project. Please also acknowledge the data producer: K. Ogilvie at NASA/GSFC", "Format": [ "PNG", "PDF", "SVG" ], "AccessURL": { "Name": "HAPI visualizations", "URL": "https://hapi-server.org/plot/?server=https://cdaweb.gsfc.nasa.gov/hapi&dataset=WI_M0_SWE&format=gallery", "Style": "x_Visualization", "ProductKey": "WI_M0_SWE", "Description": "Web Service that generates plots. See https://hapi-server.org/plot/ for the API." } } ], "_AccessInformation": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/AccessInformation.json", "TemporalDescription": { "TimeSpan": { "StartDate": "2002-08-16T00:00:05Z", "StopDate": "2026-06-24T00:00:44Z" }, "_TemporalDescription": "Generated from all.xml/@timerange_start and all.xml/@timerange_stop", "Cadence": "PT12.684S", "_Cadence": "Counts based on variable 'Epoch' in https://cdaweb.gsfc.nasa.gov/sp_phys/data/wind/swe/swe_m0/2002/wi_m0_swe_20020816_v01.cdf. The most common cadence, 12684 [ms] = PT12.684S, occurred for 27.3897% of the 1788 timesteps. " }, "Keyword": [ "Wind Interplanetary Plasma Laboratory (from all.xml/observatory/description/@short)", "Solar Wind Experiment (from all.xml/instrument/description/@short)", "Space Physics (from Master/CDFglobalAttributes/Discipline)", "Interplanetary Studies (from Master/CDFglobalAttributes/Discipline)", "WIND (from Master/CDFglobalAttributes/Source_name)", "Wind Interplanetary Plasma Laboratory (from Master/CDFglobalAttributes/Source_name)", "M0 (from Master/CDFglobalAttributes/Data_type)", "9 sec electron pitch-angle distribution averages (from Master/CDFglobalAttributes/Data_type)", "SWE (from all.xml/instrument/@ID)" ], "ObservedRegion": [ "Earth.Magnetosphere.Magnetotail", "Earth.Magnetosphere", "Earth.Magnetosheath", "Earth.NearSurface.AuroralRegion", "Earth.Magnetosphere.Main", "Heliosphere.NearEarth", "Earth.NearSurface.Plasmasphere", "Heliosphere.Inner", "Earth.NearSurface.PolarCap", "Heliosphere" ], "_ObservedRegion": "Source: https://github.com/rweigel/cdawmeta-spase/blob/main/ObservedRegion.json", "ProcessingLevel": null, "_ProcessingLevel": "Processing level is not available in the master file; it should be there instead of, say, https://github.com/rweigel/cdawmeta-spase/blob/main/ProcessingLevel.json", "InstrumentID": "spase://SMWG/Instrument/Wind/SWE", "MeasurementType": "ThermalPlasma", "Parameter2": [ { "Name": "Epoch", "ParameterKey": "Epoch", "Description": "CATDESC: 'Time at start of measurement interval.'. Notes not in Master CDF: 'The units are the units in CDF files. For other web services, this variable is may be represented as a time string.'", "Units": null, "Support": { "Qualifier": "Scalar", "SupportQuantity": "Temporal" } }, { "Name": "Ve", "ParameterKey": "Ve", "Description": "Master CDF CATDESC: 'Electron speed'. Master CDF VAR_NOTES: 'electron speeds corresponding to fluxes'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "cm/s", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "Energy", "ParameterKey": "eV", "Description": "Master CDF CATDESC: 'Electron energy'. Master CDF VAR_NOTES: 'electron speeds corresponding to fluxes'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "eV", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_para", "ParameterKey": "f_para", "Description": "Master CDF CATDESC: 'Electron flux, parallel average'. Master CDF VAR_NOTES: 'For each flux value, f_para[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_para_all", "ParameterKey": "f_para_all", "Description": "Master CDF CATDESC: '--> stack plot for all channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_para[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_para_even", "ParameterKey": "f_para_even", "Description": "Master CDF CATDESC: '--> stack plot for even channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_para[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_para_odd", "ParameterKey": "f_para_odd", "Description": "Master CDF CATDESC: '--> stack plot for odd channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_para[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_para_all_2", "ParameterKey": "f_para_all_2", "Description": "Master CDF CATDESC: '--> stack plot for all channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_para[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_para_even_2", "ParameterKey": "f_para_even_2", "Description": "Master CDF CATDESC: '--> stack plot for even channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_para[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_para_odd_2", "ParameterKey": "f_para_odd_2", "Description": "Master CDF CATDESC: '--> stack plot for odd channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_para[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_perp", "ParameterKey": "f_perp", "Description": "Master CDF CATDESC: 'Electron flux, perpendicular average'. Master CDF VAR_NOTES: 'For each flux value, f_perp[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_perp", "ParameterKey": "f_perp_all", "Description": "Master CDF CATDESC: '--> stack plot for all channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_perp[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_perp", "ParameterKey": "f_perp_even", "Description": "Master CDF CATDESC: '--> stack plot for even channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_perp[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_perp", "ParameterKey": "f_perp_odd", "Description": "Master CDF CATDESC: '--> stack plot for odd channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_perp[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_perp", "ParameterKey": "f_perp_all_2", "Description": "Master CDF CATDESC: '--> stack plot for all channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_perp[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_perp", "ParameterKey": "f_perp_even_2", "Description": "Master CDF CATDESC: '--> stack plot for even channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_perp[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_perp", "ParameterKey": "f_perp_odd_2", "Description": "Master CDF CATDESC: '--> stack plot for odd channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_perp[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_anti", "ParameterKey": "f_anti", "Description": "Master CDF CATDESC: 'Electron flux, anti-parallel average'. Master CDF VAR_NOTES: 'For each flux value, f_anti[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_anti", "ParameterKey": "f_anti_all", "Description": "Master CDF CATDESC: '--> stack plot for all channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_anti[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_anti", "ParameterKey": "f_anti_even", "Description": "Master CDF CATDESC: '--> stack plot for even channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_anti[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_anti", "ParameterKey": "f_anti_odd", "Description": "Master CDF CATDESC: '--> stack plot for odd channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_anti[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_anti", "ParameterKey": "f_anti_all_2", "Description": "Master CDF CATDESC: '--> stack plot for all channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_anti[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_anti", "ParameterKey": "f_anti_even_2", "Description": "Master CDF CATDESC: '--> stack plot for even channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_anti[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_anti", "ParameterKey": "f_anti_odd_2", "Description": "Master CDF CATDESC: '--> stack plot for odd channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_anti[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_omni", "ParameterKey": "f_omni", "Description": "Master CDF CATDESC: 'Electron flux, omni-directional average'. Master CDF VAR_NOTES: 'For each flux value, f_omni[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_omni", "ParameterKey": "f_omni_all", "Description": "Master CDF CATDESC: '--> stack plot for all channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_omni[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_omni", "ParameterKey": "f_omni_even", "Description": "Master CDF CATDESC: '--> stack plot for even channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_omni[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_omni", "ParameterKey": "f_omni_odd", "Description": "Master CDF CATDESC: '--> stack plot for odd channels, by speed'. Master CDF VAR_NOTES: 'For each flux value, f_omni[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_omni", "ParameterKey": "f_omni_all_2", "Description": "Master CDF CATDESC: '--> stack plot for all channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_omni[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_omni", "ParameterKey": "f_omni_even_2", "Description": "Master CDF CATDESC: '--> stack plot for even channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_omni[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } }, { "Name": "f_omni", "ParameterKey": "f_omni_odd_2", "Description": "Master CDF CATDESC: '--> stack plot for odd channels, by energy'. Master CDF VAR_NOTES: 'For each flux value, f_omni[i], Ve[i] gives the corresponding electron speed (cm/s).'. Notes not in Master CDF: 'The time index (the ISTP DEPEND_0 variable) for this parameter is Epoch.'", "Units": "#/[cc*(cm/s)^3*str]", "FillValue": -1e+31, "Structure": { "Size": [ 13 ] } } ] } } }