CC0 1.0 Universal is the Creative Commons license applicable to all publicly available SPASE metadata descriptions

Wind SMS Suite SupraThermal Ion Composition Spectrometer (SMS/STICS) Ion Velocity Distribution Functions (VDFs), Level 2 (L2), 3-minute Data in Magnetosphere

Updated PublishedBy name to match ROR Registry. Added ResourceType and NamingAuthority. Changed http to https in top-level schemaLocation attribute. Fixed version number separator in top-level schemaLocation attribute. Matched version number in schemaLocation attribute to updated value in Version tag. ZCB

Added MetadataRightsList and RightsList(s). Updated to 2.7.1. ZCB

The data include Wind STICS 3-minute 3D velocity distribution functions (VDFs) in three units (phase space density, differential number flux and counts), together with their statistical errors, for selected ion species using triple coincidence (H+, He+, He2+, C5+, O+, O6+, and Fe10+) and double coincidence (H+, He+, He2+, O+, O6+) measurements in the magnetosphere. For details, see https://spdf.gsfc.nasa.gov/pub/data/wind/documents/wind_stics_lv2_release_notes_revD.pdf.
The Suprathermal Ion Composition Spectrometer (STICS) is a time of flight (TOF) plasma mass spectrometer, capable of identifying mass and mass per charge for incident ions up to 200 keV/e. It uses an electrostatic analyzer to admit ions of a particular energy per charge (E/Q) into the TOF chamber. The E/Q voltage is stepped through 32 values, sitting at each value for approximately 24 sec., to measure ions over the full E/Q range of 6 - 200 keV/e. Ions then pass through a carbon foil and TOF chamber, before finally impacting on a solid-state detector (SSD) for energy measurement. STICS combines these three measurements of E/Q, TOF and residual energy, producing PHA words. This triple-coincidence technique greatly improves the signal to noise ratio in the data. Measurements of E/Q and TOF without residual energy also produce PHA words. These double-coincidence measurements are characterized by better statistics since ions whose energy does not allow them to be registered by the SSD can still be counted in double-coincidence measurements. However, ion identification in double-coincidence measurements are limited to a select number of ions that are well separated in E/Q - TOF space.  The STICS instrument provides full 3D velocity distribution functions, through a combination of multiple telescopes and spacecraft spin. The instrument includes 3 separate TOF telescopes that view 3 separate latitude sectors, as shown in Figure 1 (https://spdf.gsfc.nasa.gov/pub/data/wind/documents/wind_stics_lv2_release_notes_revD.pdf). In addition, the WIND spacecraft spins, allowing the 3 telescopes to trace out a nearly 4π steradian viewing area. The longitudinal sectors are shown in Figure 2. The solar direction is in sectors 8-10 while the earthward direction is in sectors 0-2.

Please acknowledge the Principal Investigator S. T. Lepri for use of the Data

Lepri, Susan T.; Raines, Jim M.; Ploof, Keeling C.; Tracy, Patrick J.; Gruesbeck, Jacob R.; Eddy, Tyler J.; Thomas, Jonathan W.

CC0 1.0 Universal is the Creative Commons license applicable to all publicly available NASA Heliophysics data products

Please acknowledge the Principal Investigator S. T. Lepri. Please acknowledge the Data Providers and CDAWeb when using these Data.

[no plot] Full 3-D VDF in phase space density for triple coincidence H+.

* Column 1 Labels from SECTOR_ANGLE: ["Sector 0 202.5 deg","Sector 1 180 deg","Sector 2 157.5 deg","Sector 3 135 deg","Sector 4 112.5 deg","Sector 5 90 deg","Sector 6 67.5 deg","Sector 7 45d eg","Sector 8 22.5 deg","Sector 9 0 deg","Sector 10 337.5deg","Sector 11 315 deg","Sector 12 292.5deg","Sector 13 270 deg","Sector 14 247.5deg","Sector 15 225 deg"].
* Column 2 Labels from TELESCOPE_ANGLE: ["Telescope 1 +53deg","Telescope 2 0deg","Telescope 3 -53deg"].

Phase space density value triple coincidence H+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_tc_hplus.

Phase space density value triple coincidence H+ - summed over telescope and eoq (sorted sector)

* SPDF:summed and sorted for spectrogram plot
This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_tc_hplus_sum1, SECTOR_angle.

Phase space density value triple coincidence H+ (Telescope 2).

* Column 1 Labels from SECTOR_ANGLE: ["Sector 0 202.5 deg","Sector 1 180 deg","Sector 2 157.5 deg","Sector 3 135 deg","Sector 4 112.5 deg","Sector 5 90 deg","Sector 6 67.5 deg","Sector 7 45d eg","Sector 8 22.5 deg","Sector 9 0 deg","Sector 10 337.5deg","Sector 11 315 deg","Sector 12 292.5deg","Sector 13 270 deg","Sector 14 247.5deg","Sector 15 225 deg"]

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_hplus.

[no plot] Error in velocity distribution function value triple coincidence H+.

[no plot] Full 3-D VDF in counts for triple coincidence H+.

Counts for triple coincidence H+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_tc_hplus.

Counts for triple coincidence H+ - summed over telescope and eoq (sorted sector)

* SPDF: summed and sorted for spectrogram plot
This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_tc_hplus_sum1, SECTOR_angle.

Counts for triple coincidence H+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_tc_hplus.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence H+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence H+.

Differential flux, dJ/dE triple coincidence H+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_tc_hplus.

Differential flux, dJ/dE triple coincidence H+ - summed over telescope and eoq (sorted sector)

* SPDF: summed and sorted for spectrogram
This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_tc_hplus_sum1, SECTOR_angle.

Differential flux, dJ/dE triple coincidence H+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_hplus.

[no plot] Error in the differential flux value triple coincidence H+.

[no plot] Full 3-D VDF in phase space density for triple coincidence He+.

Phase space density value triple coincidence He+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_tc_heplus.

Phase space density value triple coincidence He+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_tc_heplus_sum1, SECTOR_angle.

Phase space density value triple coincidence He+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_heplus.

[no plot] Error in velocity distribution function value triple coincidence He+.

[no plot] Full 3-D VDF in counts for triple coincidence He+.

Counts for triple coincidence He+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_tc_heplus.

Counts for triple coincidence He+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_tc_heplus_sum1, SECTOR_angle.

Counts for triple coincidence He+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_tc_heplus.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence He+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence He+.

Differential flux, dJ/dE triple coincidence He+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_tc_heplus.

Differential flux, dJ/dE triple coincidence He+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_tc_heplus_sum1, SECTOR_angle.

Differential flux, dJ/dE triple coincidence He+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_heplus.

[no plot] Error in the differential flux value triple coincidence He+.

[no plot] Full 3-D VDF in phase space density for triple coincidence He2+.

Phase space density value triple coincidence He2+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_tc_he2plus.

Phase space density value triple coincidence He2+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_tc_he2plus_sum1, SECTOR_angle.

Phase space density value triple coincidence He2+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_he2plus.

[no plot] Error in velocity distribution function value triple coincidence He2+.

[no plot] Full 3-D VDF in counts for triple coincidence He2+.

Counts for triple coincidence He2+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_tc_he2plus.

Counts for triple coincidence He2+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_tc_he2plus_sum1, SECTOR_angle.

Counts for triple coincidence He2+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_tc_he2plus.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence He2+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence He2+.

Differential flux, dJ/dE triple coincidence He2+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_tc_he2plus.

Differential flux, dJ/dE triple coincidence He2+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_tc_he2plus_sum1, SECTOR_angle.

Differential flux, dJ/dE triple coincidence He2+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_he2plus.

[no plot] Error in the differential flux value triple coincidence He2+.

[no plot] Full 3-D VDF in phase space density for triple coincidence O+.

Phase space density value triple coincidence O+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_tc_oplus.

Phase space density value triple coincidence O+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_tc_oplus_sum1, SECTOR_angle.

Phase space density value triple coincidence O+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_oplus.

[no plot] Error in velocity distribution function value triple coincidence O+.

[no plot] Full 3-D VDF in counts for triple coincidence O+.

Counts for triple coincidence O+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_tc_oplus.

Counts for triple coincidence O+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_tc_oplus_sum1, SECTOR_angle.

Counts for triple coincidence O+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_tc_oplus.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence O+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence O+.

Differential flux, dJ/dE triple coincidence O+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_tc_oplus.

Differential flux, dJ/dE triple coincidence O+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_tc_oplus_sum1, SECTOR_angle.

Differential flux, dJ/dE triple coincidence O+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_oplus.

[no plot] Error in the differential flux value triple coincidence O+.

[no plot] Full 3-D VDF in phase space density for triple coincidence O6+.

Phase space density value triple coincidence O6+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_tc_o6plus.

Phase space density value triple coincidence O6+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_tc_o6plus_sum1, SECTOR_angle.

Phase space density value triple coincidence O6+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_o6plus.

[no plot] Error in velocity distribution function value triple coincidence O6+.

[no plot] Full 3-D VDF in counts for triple coincidence O6+.

Counts for triple coincidence O6+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_tc_o6plus.

Counts for triple coincidence O6+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_tc_o6plus_sum1, SECTOR_angle.

Counts for triple coincidence O6+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_tc_o6plus.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence O6+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence O6+.

Differential flux, dJ/dE triple coincidence O6+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_tc_o6plus.

Differential flux, dJ/dE triple coincidence O6+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_tc_o6plus_sum1, SECTOR_angle.

Differential flux, dJ/dE triple coincidence O6+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_o6plus.

[no plot] Error in the differential flux value triple coincidence O6+.

[no plot] Full 3-D VDF in phase space density for triple coincidence C5+.

Phase space density value triple coincidence C5+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_tc_c5plus.

Phase space density value triple coincidence C5+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_tc_c5plus_sum1, SECTOR_angle.

Phase space density value triple coincidence C5+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_c5plus.

[no plot] Error in velocity distribution function value triple coincidence C5+.

[no plot] Full 3-D VDF in counts for triple coincidence C5+.

Counts for triple coincidence C5+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_tc_c5plus.

Counts for triple coincidence C5+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_tc_c5plus_sum1, SECTOR_angle.

Counts for triple coincidence C5+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_tc_c5plus.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence C5+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence C5+.

Differential flux, dJ/dE triple coincidence C5+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_tc_c5plus.

Differential flux, dJ/dE triple coincidence C5+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_tc_c5plus_sum1, SECTOR_angle.

Differential flux, dJ/dE triple coincidence C5+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_c5plus.

[no plot] Error in the differential flux value triple coincidence C5+.

[no plot] Full 3-D VDF in phase space density for triple coincidence Fe10+.

Phase space density value triple coincidence Fe10+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_tc_fe10plus.

Phase space density value triple coincidence Fe10+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_tc_fe10plus_sum1, SECTOR_angle.

Phase space density value triple coincidence Fe10+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_fe10plus.

[no plot] Error in velocity distribution function value triple coincidence Fe10+.

[no plot] Full 3-D VDF in counts for triple coincidence Fe10+.

Counts for triple coincidence Fe10+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_tc_fe10plus.

Counts for triple coincidence Fe10+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_tc_fe10plus_sum1, SECTOR_angle.

Counts for triple coincidence Fe10+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_tc_fe10plus.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence Fe10+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence Fe10+.

Differential flux, dJ/dE triple coincidence Fe10+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_tc_fe10plus.

Differential flux, dJ/dE triple coincidence Fe10+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_tc_fe10plus_sum1, SECTOR_angle.

Differential flux, dJ/dE triple coincidence Fe10+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_fe10plus.

[no plot] Error in the differential flux value triple coincidence Fe10+.

[no plot] Full 3-D VDF in phase space density for triple coincidence C+.

Phase space density value triple coincidence C+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_cplus.

[no plot] Error in velocity distribution function value triple coincidence C+.

[no plot] Full 3-D VDF in counts for triple coincidence C+.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence C+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence C+.

Differential flux, dJ/dE triple coincidence C+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_cplus.

[no plot] Error in the differential flux value triple coincidence C+.

[no plot] Full 3-D VDF in phase space density for triple coincidence N+.

Phase space density value triple coincidence N+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_nplus.

[no plot] Error in velocity distribution function value triple coincidence N+.

[no plot] Full 3-D VDF in counts for triple coincidence N+.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence N+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence N+.

Differential flux, dJ/dE triple coincidence N+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_nplus.

[no plot] Error in the differential flux value triple coincidence N+.

[no plot] Full 3-D VDF in phase space density for triple coincidence O2+.

Phase space density value triple coincidence O2+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_o2plus.

[no plot] Error in velocity distribution function value triple coincidence O2+.

[no plot] Full 3-D VDF in counts for triple coincidence O2+.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence O2+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence O2+.

Differential flux, dJ/dE triple coincidence O2+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_o2plus.

[no plot] Error in the differential flux value triple coincidence O2+.

[no plot] Full 3-D VDF in phase space density for triple coincidence O7+.

Phase space density value triple coincidence O7+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_o7plus.

[no plot] Error in velocity distribution function value triple coincidence O7+.

[no plot] Full 3-D VDF in counts for triple coincidence O7+.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence O7+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence O7+.

Differential flux, dJ/dE triple coincidence O7+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_o7plus.

[no plot] Error in the differential flux value triple coincidence O7+.

[no plot] Full 3-D VDF in phase space density for triple coincidence O8+.

Phase space density value triple coincidence O8+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_o8plus.

[no plot] Error in velocity distribution function value triple coincidence O8+.

[no plot] Full 3-D VDF in counts for triple coincidence O8+.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence O8+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence O8+.

Differential flux, dJ/dE triple coincidence O8+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_o8plus.

[no plot] Error in the differential flux value triple coincidence O8+.

[no plot] Full 3-D VDF in phase space density for triple coincidence C4+.

Phase space density value triple coincidence C4+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_c4plus.

[no plot] Error in velocity distribution function value triple coincidence C4+.

[no plot] Full 3-D VDF in counts for triple coincidence C4+.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence C4+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence C4+.

Differential flux, dJ/dE triple coincidence C4+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_c4plus.

[no plot] Error in the differential flux value triple coincidence C4+.

[no plot] Full 3-D VDF in phase space density for triple coincidence C6+.

Phase space density value triple coincidence C6+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_c6plus.

[no plot] Error in velocity distribution function value triple coincidence C6+.

[no plot] Full 3-D VDF in counts for triple coincidence C6+.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence C6+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence C6+.

Differential flux, dJ/dE triple coincidence C6+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_c6plus.

[no plot] Error in the differential flux value triple coincidence C6+.

[no plot] Full 3-D VDF in phase space density for triple coincidence Fe8+.

Phase space density value triple coincidence Fe8+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_fe8plus.

[no plot] Error in velocity distribution function value triple coincidence Fe8+.

[no plot] Full 3-D VDF in counts for triple coincidence Fe8+.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence Fe8+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence Fe8+.

Differential flux, dJ/dE triple coincidence Fe8+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_fe8plus.

[no plot] Error in the differential flux value triple coincidence Fe8+.

[no plot] Full 3-D VDF in phase space density for triple coincidence Fe9+.

Phase space density value triple coincidence Fe9+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_fe9plus.

[no plot] Error in velocity distribution function value triple coincidence Fe9+.

[no plot] Full 3-D VDF in counts for triple coincidence Fe9+.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence Fe9+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence Fe9+.

Differential flux, dJ/dE triple coincidence Fe9+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_fe9plus.

[no plot] Error in the differential flux value triple coincidence Fe9+.

[no plot] Full 3-D VDF in phase space density for triple coincidence Fe16+.

Phase space density value triple coincidence Fe16+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_tc_fe16plus.

[no plot] Error in velocity distribution function value triple coincidence Fe16+.

[no plot] Full 3-D VDF in counts for triple coincidence Fe16+.

[no plot] Error in counts estimated assuming Poisson statistics triple coincidence Fe16+.

[no plot] Full 3-D VDF differential flux, dJ/dE triple coincidence Fe16+.

Differential flux, dJ/dE triple coincidence Fe16+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_tc_fe16plus.

[no plot] Error in the differential flux value triple coincidence Fe16+.

[no plot] Full 3-D VDF in phase space density for double coincidence H+.

Phase space density value double coincidence H+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_dc_hplus.

Phase space density value double coincidence H+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_dc_hplus_sum1, SECTOR_angle.

Phase space density value double coincidence H+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_dc_hplus.

[no plot] Error in velocity distribution function value double coincidence H+.

[no plot] Full 3-D VDF in counts for double coincidence H+.

Counts for double coincidence H+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_dc_hplus.

Counts for double coincidence H+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_dc_hplus_sum1, SECTOR_angle.

Counts for double coincidence H+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_dc_hplus.

[no plot] Error in counts estimated assuming Poisson statistics double coincidence H+.

[no plot] Full 3-D VDF differential flux, dJ/dE double coincidence H+.

Differential flux, dJ/dE double coincidence H+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_dc_hplus.

Differential flux, dJ/dE double coincidence H+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_dc_hplus_sum1, SECTOR_angle.

Differential flux, dJ/dE double coincidence H+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_dc_hplus.

[no plot] Error in the differential flux value double coincidence H+.

[no plot] Full 3-D VDF in phase space density for double coincidence He+.

Phase space density value double coincidence He+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_dc_heplus.

Phase space density value double coincidence He+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_dc_heplus_sum1, SECTOR_angle.

Phase space density value double coincidence He+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_dc_heplus.

[no plot] Error in velocity distribution function value double coincidence He+.

[no plot] Full 3-D VDF in counts for double coincidence He+.

Counts for double coincidence He+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_dc_heplus.

Counts for double coincidence He+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_dc_heplus_sum1, SECTOR_angle.

Counts for double coincidence He+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_dc_heplus.

[no plot] Error in counts estimated assuming Poisson statistics double coincidence He+.

[no plot] Full 3-D VDF differential flux, dJ/dE double coincidence He+.

Differential flux, dJ/dE double coincidence He+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_dc_heplus.

Differential flux, dJ/dE double coincidence He+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_dc_heplus_sum1, SECTOR_angle.

Differential flux, dJ/dE double coincidence He+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_dc_heplus.

[no plot] Error in the differential flux value double coincidence He+.

[no plot] Full 3-D VDF in phase space density for double coincidence He2+.

Phase space density value double coincidence He2+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_dc_he2plus.

Phase space density value double coincidence He2+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_dc_he2plus_sum1, SECTOR_angle.

Phase space density value double coincidence He2+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_dc_he2plus.

[no plot] Error in velocity distribution function value double coincidence He2+.

[no plot] Full 3-D VDF in counts for double coincidence He2+.

Counts for double coincidence He2+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_dc_he2plus.

Counts for double coincidence He2+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_dc_he2plus_sum1, SECTOR_angle.

Counts for double coincidence He2+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_dc_he2plus.

[no plot] Error in counts estimated assuming Poisson statistics double coincidence He2+.

[no plot] Full 3-D VDF differential flux, dJ/dE double coincidence He2+.

Differential flux, dJ/dE double coincidence He2+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_dc_he2plus.

Differential flux, dJ/dE double coincidence He2+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_dc_he2plus_sum1, SECTOR_angle.

Differential flux, dJ/dE double coincidence He2+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_dc_he2plus.

[no plot] Error in the differential flux value double coincidence He2+.

[no plot] Full 3-D VDF in phase space density for double coincidence O+.

Phase space density value double coincidence O+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_dc_oplus.

Phase space density value double coincidence O+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_dc_oplus_sum1, SECTOR_angle.

Phase space density value double coincidence O+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_dc_oplus.

[no plot] Error in velocity distribution function value double coincidence O+.

[no plot] Full 3-D VDF in counts for double coincidence O+.

Counts for double coincidence O+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_dc_oplus.

Counts for double coincidence O+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_dc_oplus_sum1, SECTOR_angle.

Counts for double coincidence O+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_dc_oplus.

[no plot] Error in counts estimated assuming Poisson statistics double coincidence O+.

[no plot] Full 3-D VDF differential flux, dJ/dE double coincidence O+.

Differential flux, dJ/dE double coincidence O+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_dc_oplus.

Differential flux, dJ/dE double coincidence O+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_dc_oplus_sum1, SECTOR_angle.

Differential flux, dJ/dE double coincidence O+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_dc_oplus.

[no plot] Error in the differential flux value double coincidence O+.

[no plot] Full 3-D VDF in phase space density for double coincidence O6+.

Phase space density value double coincidence O6+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: DF_dc_o6plus.

Phase space density value double coincidence O6+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: DF_dc_o6plus_sum1, SECTOR_angle.

Phase space density value double coincidence O6+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_dc_o6plus.

[no plot] Error in velocity distribution function value double coincidence O6+.

[no plot] Full 3-D VDF in counts for double coincidence O6+.

Counts for double coincidence O6+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: counts_dc_o6plus.

Counts for double coincidence O6+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: counts_dc_o6plus_sum1, SECTOR_angle.

Counts for double coincidence O6+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: counts_dc_o6plus.

[no plot] Error in counts estimated assuming Poisson statistics double coincidence O6+.

[no plot] Full 3-D VDF differential flux, dJ/dE double coincidence O6+.

Differential flux, dJ/dE double coincidence O6+ - summed over telescope and sector

This parameter is virtual. It is calculated by calling the function SPDF_SUM_OVER_COL_ROW with the following input parameters: dJ_dc_o6plus.

Differential flux, dJ/dE double coincidence O6+ - summed over telescope and eoq (sorted sector)

This parameter is virtual. It is calculated by calling the function REORDER_DATA with the following input parameters: dJ_dc_o6plus_sum1, SECTOR_angle.

Differential flux, dJ/dE double coincidence O6+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_dc_o6plus.

[no plot] Error in the differential flux value double coincidence O6+.

[no plot] Full 3-D VDF in phase space density for double coincidence C+.

Phase space density value double coincidence C+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: DF_dc_cplus.

[no plot] Error in velocity distribution function value double coincidence C+.

[no plot] Full 3-D VDF in counts for double coincidence C+.

[no plot] Error in counts estimated assuming Poisson statistics double coincidence C+.

[no plot] Full 3-D VDF differential flux, dJ/dE double coincidence C+.

Differential flux, dJ/dE double coincidence C+ (Telescope 2).

This parameter is virtual. It is calculated by calling the function ARR_SLICE with the following input parameters: dJ_dc_cplus.

[no plot] Error in the differential flux value double coincidence C+.